Archives: Products
Showing 10881–10896 of 23773 results
-
4BAx5/16 SKT HEAD CAP SCREW (12.9)Read moreQualfast Socket Head Cap Screws, Inch: BA – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS 2470 -
4BAx5/8 SKT HEAD C/SUNK SCREW (10.9)Read moreQualfast Socket Head Countersunk Screws, Inch: BA – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact.
Dimensions to BS 2470 -
4BAx5/8 SKT HEAD CAP SCREW (12.9)Read more
Qualfast Socket Head Cap Screws, Inch: BA – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS 2470 -
4BAx5/8 SKT SET SCREW KNURLED (14.9)Read moreQualfast Socket Set Screws, Inch: BA – Standard (Self-Colour) – Knurled Cup
High tensile alloy steel. Grade 14.9. BS 2470.
For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above 1/4â are generally counterbored to provide maximum clamping efficiency. -
4BAx7/8 SKT HEAD CAP SCREW (12.9)Read more
Qualfast Socket Head Cap Screws, Inch: BA – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS 2470 -
4FL CARBIDE PLAIN SHANK END MILLS 3-10mm (SET-6)Read moreSwissTech Carbide Plain Shank Milling Cutters – 6 Piece Sets
6 Piece Sets
Dimensions to DIN 844. Cutting diameter to js12. Shank diameter to h6. Contents: 3, 4, 5, 6, 8 and 10mm.SwissTech carbide cutters are specifically engineered to be used in CNC machine centres. The rigidity and integrity of the machine tool is paramount to the performance of this type of cutter. Carbide cutters are used mainly at high speed and feed rates. The increased temperatures associated with cutting at such high rates are absorbed by the carbide, which will retain its strength and hardness. SwissTech carbide cutters can be used across a range of materials.
-
4GB USB 2.0 FLASH DRIVERead moreUSB 2.0 Flash Drives
Very quick and simple to use and compatible with both PCs and Macs. Simply plug the device into your USB port and you can transfer files or run presentations in an instant. On the majority of computers the USB Flash Drive is plug and play.
Features:
Plugs into any USB port. Hi-speed USB 2.0. Locking function. Fits on your key ring or in your pocket. -
4LB CLUB HAMMER FIBREGLASS SHAFTRead moreClub Hammers
Club (or lump) hammers are fully forged and heat treated with flat face and chamfered edge for use with cold chisels, brick bolsters, star drills and masonry nails.
Fibreglass Shaft
With textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the userâs hand and wrist. Reduces operator fatigue and the risk of repetitive strain injury (RSI). -
4LB CLUB HAMMER HICKORY SHAFTRead moreClub Hammers
Club (or lump) hammers are fully forged and heat treated with flat face and chamfered edge for use with cold chisels, brick bolsters, star drills and masonry nails.
Hickory Shaft
With fine grain, forged steel head, hardened and tempered with polished faces. -
4LB SLEDGE/CLUB HAMMER FIBREGLASS SHAFT BSS876Read moreKennedy Sledge Hammers: Fibreglass Shaft (BS 876 Sledge Hammers)
Double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails. They are available with a hickory or fibreglass shaft.
Fibreglass Shaft (BS 876 Sledge Hammers)
Dampens the impact transmitted to the userâs hand and wrist. Tested to the requirements of BS 876: 1981 (head stamped BS 876). -
4LB SLEDGE/CLUB HAMMER HICKORY SHAFTRead moreSledge Hammers
Double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails. They are available with a hickory or fibreglass shaft.
Hickory Shaft
With fine grain, forged steel head, hardened and tempered with polished faces. -
4mm DEEP SOCKET 1/4″ SQ DRRead moreKennedy Bi-Hexagon Sockets, 1/4″ – Metric
Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.
Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
4mm DIA. x 80mm COBALT TOOLBITRp152.000Read moreHSS Cobalt Toolbits
5% Cobalt Round Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
4mm DIN 471 EXTERNAL CIRCLIPS (PACK 100)Read moreQualfast Circlips: External
Circlips simplify designs and linked with lower installation costs are the ideal item for
replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. External DIN 471. -
4mm DIN 6799 ‘E’ CLIPS (PACK 100)Read moreQualfast E-Clips
E-clips simplify designs and linked with lower installation costs are the ideal item for replacing more traditional fasteners. All are manufactured from carbon steel with a phosphate finish. Conform to DIN 6799.
-
4mm EX/LENGTH INSERTED PIN PUNCH CUSHION GRIPRead moreKennedy Long Parallel Pin Punches With Air Grip
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. Fitted with an air grip handle that absorbs vibration as well as deflecting wayward hammer blows.