Archives: Products

Showing 9857–9872 of 23773 results

3mm HEX SOCKET BIT 1/4″ SQ DR

Kennedy Bi-Hexagon Sockets, 1/4″ – Screwdriver Bits

Screwdriver Bits
Manufactured from high quality chrome vanadium, fully polished finish. Conform to DIN.
Overall length: 37mm.
Bit length: 19mm.

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.

Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

Read more
3mm HEX SOCKET BIT 3/8″ SQ DR

Kennedy Screwdriver Bit Sockets, 3/8″

Often used in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is important in this type of environment. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free to ensure non sparking. All have ball retaining grooves. Conform to DIN standards.

Read more
3mm HSS 3FL STR/SHK SP/FL COUNTERBORE
Rp443.000

HSS Solid Counterbores – Plain Shank

Plain Shank
Spiral flute, 3 flute. Medium duty. Used for milling of pre-drilled holes to allow bolt or cap head screws to lie flush with the component surface. Manufactured to BS328: 5:1983.

Read more
3mm HSS L/S SC/SH B/N SLOT DRILL

Sherwood HSS Threaded Shank Ball Nosed Slot Drills 2 Flute – Metric

Long Series Type B230T
Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30 helix. Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
3mm HSS L/S SC/SH END MILL

Sherwood HSS Threaded Shank End Mills 4, 6 & 8 Flute – Metric

Long Series E430T
Used for profile milling and producing open slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: up to 38.00. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00. Tolerance: +0.1250, -0.0000.

Read more
3mm HSS L/S SC/SH SLOT DRILL

Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

Long Series 5230T
Used for milling keyways and slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

*Based on BS122: Part 4: 1980 though specific diameter is not included.

Read more
3mm HSS PLAIN SHANK CORNER ROUNDING CUTTER
Rp905.000

Sherwood HSS Plain Shank Corner Rounding Cutters

Designed to produce convex corner radii. For milling structural, carburising and heat treated steel up to 900N/mm2. Manufactured to works standards. 5Â° RH Flutes. Bright finish, straight helix. Radii tolerance: Â± 0.005â.

Read more
3mm HSS SC/SH B/N SLOT DRILL

Sherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric

Short Series Type B210T
Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
3mm HSS SC/SH CORNER ROUNDING CUTTER
Rp862.000

Sherwood HSS Threaded Shank Corner Rounding Cutters – Metric

Designed to produce convex corner radii. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to works standards. 5Â° RH Flutes.
Bright finish, straight helix. Radii tolerance: Â± 0.005â. Shank to DIN 1835/D.

Read more
3mm HSS SC/SH END MILL

Sherwood HSS Threaded Shank End Mills Multi Flute – Metric

Short Series E410T
Used for profile milling and producing open slots. Bright finish. Flute type : 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000.

Read more
3mm HSS SC/SH SLOT DRILL

Sherwood HSS Threaded Shank Slot Drills 2 Flute – Metric

Short Series S210T – Metric
Used for milling keyways and slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
3mm HSS-COBALT 2FL ST/SH SLOT DRILL 52mm O/A
Rp230.000

Sherwood HSS-Co Plain Shank Milling Cutters 2 Flute – Regular Length

Regular Length
Non-centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30Â° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

Read more
3mm HSS-COBALT 2FL ST/SH SLOT DRILL 56mm O/A
Rp302.000

Sherwood HSS-Co Plain Shank Milling Cutters 2 Flute – Long Series

Long Series
Non-centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30Â° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

Read more
3mm HSS-COBALT 3FL SC/SH SLOT DRILL

Sherwood HSS-Co 5% Threaded Shank Slot Drills 3 Flute, Regular Series – Metric

Regular Series Type 5321T
Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

Read more
3mm HSS-COBALT B/N KC3 THROWAWAY CUTTER

Kennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

Ball Nose – Metric
Long Series – Metric

Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.

*Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.

Metric Tolerances:
Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020.

Read more
3mm HSS-COBALT KC3 THROWAWAY CUTTER
Rp139.000

HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters

For high volume production. Compatible with standard automatic locking chucks and spindle adaptors (available on request).

Short series

Read more