Archives: Products
Showing 9809–9824 of 23773 results
-
38mmx50M CROSS WEAVE FILAMENT TAPERead moreFilament Tape
Clear polypropylene film, reinforced with glass fibre filaments which are cross-woven into an aggressive high shear adhesive to give high strength. Used for heavy reinforcement, high security sealing. Adheres to all paper, card and plastics.
-
38mmx50M GENERAL PURPOSEMASKING TAPERead moreAvon Masking Tape – General Purpose
Avon masking tape is a pressure sensitive adhesive tape manufactured from thin paper with a removable pressure sensitive adhesive, it is easy-to-tear. It is used mainly in painting, to mask off areas that should not be painted. The adhesive is the key to its usefulness, as it allows the tape to be easily removed without leaving residue or damaging the surface to which it is applied.
-
38oz POLYURETHANE DEAD BLOW HAMMERRead moreSafeBlower⢠Hammers
With solid steel bar shaft and hollow head. Inside the polyurethane moulded hammer head are thousands of steel pellets which impact a split second after the hammer face, reducing rebound whilst also adding to the force of the blow.
-
38W FLUORESCENT TASK LAMP 240VRead morePortable Task Light
Using an energy saving 28W 2D fluorescent bulb that generates the same light as halogen but using far less energy. Tough poly-carbonate case and virtually shatterproof lens. Supplied with 3m rubberised mains lead. Ideal for all trades. IP44 Rated.
-
38x25mm AL/OX SANDING BANDS GRIT 150Read moreYork Sanding Bands
Spiral wound with tear-resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals.
* P60 = Coarse, P80 = Medium, P150 = Fine. -
38x25mm AL/OX SANDING BANDS GRIT 60Read moreYork Sanding Bands
Spiral wound with tear-resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals.
* P60 = Coarse, P80 = Medium, P150 = Fine. -
38x25mm AL/OX SANDING BANDS GRIT 80Read moreYork Sanding Bands
Spiral wound with tear-resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals.
* P60 = Coarse, P80 = Medium, P150 = Fine. -
38x25mm HIGH SECURITY BRASS PADLOCKRead moreMatlock? Brass Padlocks
Matlock⢠security a comprehensive range of door locks and padlocks, suitable for securing bikes, sheds, garages, business premises etc. All Matlock? security products are backed by a quality assurance guarantee.
-
38x25mm SHACKLE W/PROOF BRASS PADLOCKRead moreMatlock⢠Padlocks
Matlock⢠security a comprehensive range of door locks and padlocks, suitable for securing bikes, sheds, garages, business premises etc. All Matlock? security products are backed by a quality assurance guarantee.
-
38x25mm SPINDLE MOUNTED HOLDERRead moreYork Drum Holders
Suitable for use with chucks/collets on all portable power and air tools. For use with spiral bound abrasive sanding bands. Self expanding when in use for a secure grip on the band. All shanks are 6mm except where marked * which has an 8mm shank.
-
38x50mm SHACKLE W/PROOF BRASS PADLOCKRead moreMatlock⢠Padlocks
Matlock⢠security a comprehensive range of door locks and padlocks, suitable for securing bikes, sheds, garages, business premises etc. All Matlock? security products are backed by a quality assurance guarantee.
-
38x50mm WEATHERPROOF ALUMINIUM PADLOCKRead moreMatlock⢠Padlocks
Matlock⢠security a comprehensive range of door locks and padlocks, suitable for securing bikes, sheds, garages, business premises etc. All Matlock? security products are backed by a quality assurance guarantee.
-
38x75mm HIGH SECURITY BRASS PADLOCKRead moreMatlock? Brass Padlocks
Matlock⢠security a comprehensive range of door locks and padlocks, suitable for securing bikes, sheds, garages, business premises etc. All Matlock? security products are backed by a quality assurance guarantee.
-
39.00mm HSS T/S DRILLRead moreSherwood HSS Taper Shank Drills, 4 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
39.50mm HSS T/S DRILLRead more
Sherwood HSS Taper Shank Drills, 4 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
39″ RULE-WALLETEDRead moreSenator Carpenterâs Rules
Extremely lightweight extrusion made from anodised aluminium, hardened and lacquered. Graduated mm/1/8â. Supplied in clear plastic wallets.