Archives: Products
Showing 9889–9904 of 23773 results
-
3mmx52mm O/A HSS-COBALT 4FL PL/SH END MILLRp244.000Add to cartHSS-Co Plain Shank Milling Cutters 4 Flute, Regular Length – Metric
Regular Length
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
3mmx56mm O/A HSS-COBALT 4FL PL/SH END MILLRead moreSherwood HSS-Co Plain Shank Milling Cutters 4 Flute, Long Series – Metric
Long Series
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
3MT 1/2″x20TPI DRILL CHUCK ARBORAdd to cartKennedy Industrial Drill Chuck Arbors – Morse Taper Drive to Threaded
Morse Taper Drive to Threaded
Precision machined, fully hardened and ground to give maximum surface contact. -
3MT 5/8″x16TPI DRILL CHUCK ARBORRead moreKennedy Industrial Drill Chuck Arbors – Morse Taper Drive to Threaded
Morse Taper Drive to Threaded
Precision machined, fully hardened and ground to give maximum surface contact. -
3MT REVOLVING CENTRERead moreAtlas Standard Duty Revolving Centres
Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60° point.
Maximum runout: 0.005mm. -
3MT x 1JT DRILL CHUCK ARBORRead moreArbors
Morse Taper Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
3MT x 2JT DRILL CHUCK ARBORRead moreArbors
Morse Taper Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
3MT x 33JT DRILL CHUCK ARBORRead moreArbors
Morse Taper Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
3MT x 3JT DRILL CHUCK ARBORRead moreArbors
Morse Taper Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
3MT x 4JT DRILL CHUCK ARBORRead moreArbors
Morse Taper Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
3MT x 5JT DRILL CHUCK ARBORRead moreArbors
Morse Taper Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
3MT x 6JT DRILL CHUCK ARBORRead moreArbors
Morse Taper Drive to Jacobs Taper
Precision machined, fully hardened and ground to give maximum surface contact. -
3Mx120mm SWL 2000KG SIMPLEX FLAT SLINGRead moreFlat Webbing Slings
High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate ‘SWL’ (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant ‘SWL’.
Flat Slings with reinforced eye at each end.
Made to BS EN 1492:1 – 2000. -
3Mx120mm SWL 4000KG DUPLEX FLAT SLINGRead moreFlat Webbing Slings
High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate ‘SWL’ (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant ‘SWL’.
Flat Slings with reinforced eye at each end.
Made to BS EN 1492:1 – 2000. -
3Mx150mm SWL 5000KG DUPLEX FLAT SLINGRead moreFlat Webbing Slings
High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate ‘SWL’ (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant ‘SWL’.
Flat Slings with reinforced eye at each end.
Made to BS EN 1492:1 – 2000. -
3Mx180mm SWL 3000KG SIMPLEX FLAT SLINGRead moreFlat Webbing Slings
High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate ‘SWL’ (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant ‘SWL’.
Flat Slings with reinforced eye at each end.
Made to BS EN 1492:1 – 2000.