Archives: Products
Showing 9713–9728 of 23773 results
-
36PC IMPERIAL GAUGE BLOCK SET GRADE 2Read moreKennedy Steel Gauge Block Sets – Grade 2
Grade 2: For Workshop Use
Supplied in high quality wooden bench cases, complete with UKAS certificate of calibration. Available in two grades.
Manufactured to BS EN ISO 3650. -
36×4.00mm HSS GT STR. FLUTE PLUG TAPRead moreSherwood Metric Coarse HSS Ground Thread Taps, Straight Flute – Plug
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
Thread Forms are Class 2 medium fit tolerance. Straight Flute Individual Sizes IS0 529.
(1) Diameter and pitch not mentioned in ISO. -
36×4.00mm HSS GT STR. FLUTE SECOND TAPRead moreSherwood Metric Coarse HSS Ground Thread Taps, Straight Flute – Second
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
Thread Forms are Class 2 medium fit tolerance. Straight Flute Individual Sizes IS0 529.
(1) Diameter and pitch not mentioned in ISO. -
36×4.00mm HSS GT STR. FLUTE TAP SETRp5.927.000Read moreSets of Three
1 each, taper, second and plug lead
-
36×4.00mm HSS GT STR. FLUTE TAPER TAPRead more
Metric Coarse HSS Ground Thread Taps
Straight Flute Individual Sizes IS0 529
(1) Diameter and pitch not mentioned in ISO.
-
36×4.00mm HSS HEXAGON DIE NUTRp2.007.000Read moreMetric Coarse thread Restoring Die Nuts
HSS Ground ThreadBS 1127
For use with spanners to clean
and repair existing external
screw threads. -
37.00mm HSS T/S DRILLRead moreSherwood HSS Taper Shank Drills, 4 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
37.50mm HSS T/S DRILLRead more
Sherwood HSS Taper Shank Drills, 4 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
37/64″ HSS S/S JOBBER DRILLRead moreHSS Jobber Drills Steam Tempered – Inch
Series J100
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
37/64″ HSS T/S DRILLRead more
Sherwood General Purpose HSS Taper Shank Drills, 2 Morse Taper – Inch Sizes
Series T100 – Inch
Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN. -
370mmx38M NATURAL MAINTENANCE ROLLRead moreULTRA Sustainably Sourced Absorbent Rolls
A new generation of sustainably-sourced ‘Eco-Fibre’ absorbents. Utilising naturally-occurring cottons and wood cellulose from managed forests. Third generation coverstock supplies strength and wiping efficiency.
⢠Solent’s Highest Performing Absorbent – absorbency rates “better than or equal to” other absorbents – at no extra cost
⢠A new generation of sustainably-sourced ‘Eco-Fibre’ absorbents utilising the latest Nu-Dri⢠Technology
⢠Third generation coverstock supplies strength and wiping efficiency
⢠Solent ULTRA represent a new generation of sustainably sourced products
⢠Hazard level: Moderate to high
⢠Typical spill volume: Medium
⢠Frequency of use: Medium to high⢠Maintenance Grade – Utilising wood cellulose from managed forests. For all general uses. With the versitily to absorb a wide renage of fluids including both water and oils at the same time.
Maintenance – Absorbs All Fluids – Grey/Black. Not suitable for use on water.
⢠Oil Only Grade – Proprietary processed natural cotton specially adapted to absorb oil spill from both land and water. With a proprietary hydrophobic treatment:- absorbs oil only, rejects water and retains buoyancy even when laden. White. Hydrophobic absorbent can be used on water.
Will float even when oil laden.Nu-Dri is a trademark of Lubetech Industries
-
370x170x240mm RECTANGULAR PLASTIC BUCKETRead moreRectangular Bucket
Ideal for use with window washers and squeegees.
-
3711 SHIMRp226.000Read moreIndexa Indexable Tooling Spares – Shims
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you are using.
-
3714 SHIMRp210.000Read moreIndexa Indexable Tooling Spares – Shims
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you are using.
-
3715 SHIMRp191.000Read moreIndexa Indexable Tooling Spares – Shims
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you are using.
-
3717 SHIM (IVSN-322)Rp321.000Read moreIndexa Indexable Tooling Spares – Shims
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you are using.