Archives: Products
Showing 9745–9760 of 23773 results
-
38.1×12.7mm RAD.1/2″SK.ROUNDING OVER BITRead moreRouter Cutters
Two Flute Rounding Over Bits
To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work. -
38.50mm HSS T/S DRILLRead moreSherwood HSS Taper Shank Drills, 4 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
380 P20/P30 BRAZED TOOLRp925.000Read moreKennedy Light Duty Round Shank Boring Tools Used at 45° in Bar – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
380ml METAL SILICONE SEALANT GUNRead moreSealant Cartridge Applicator Guns
Professional Metal Guns
Extremely robust and ideal for continuous use. Will not twist under pressure. Smooth action for optimum application of sealant. -
380x25mm (15″x1″) FLAT CHISELRead morePower Tool Chisels
Bosch Style Chisels
For Bosch: GBH7/45, UBH6/35, UBH12/50, USH6, 11202, 11203, 11204, 11206, 11208, 11209. AEG
(Atlas Copco): PHD26, PH38, PHD38, PH240D, PH350D. Black & Decker: HD2032, HD2038, P8032, P8038.
19mm Hex Shank with Single Flat & Round Tang -
380x25mm (15″x1″) FLAT CHISELRead morePower Tool Chisels
Kango Style Chisels
For Kango: 501, 627, 628, 637, 638, 430 – Type 750 shanks.
19mm Hex Shank with Single Flat & Round Tang -
380x25mm (15″x1″) FLAT CHISELRead morePower Tool Chisels
For Kango: 900K, 928, 950K, 978, 1400.
Hitachi: DH38YD, DH50SA, H55SA.
Makita: HM1200K, HR3850K.
21mm Hex Shank with Single Flat & Round Tang -
380x25mm (15″x1″) FLAT CHISELRead morePower Tool Chisels
For Bosch: USH10, 11305, 12312.
19mm Hex Shank with Single Flat -
380x31mm (15″x1.1/4″) FLAT CHISELRead morePower Tool Chisels
For Bosch: USH27, USH28, 11304, 11308, 12314
29mm Hex Shank with Single Flat -
380x3mm (15″x1/8″) MOIL POINT CHISELRead morePower Tool Chisels
Bosch Style Chisels
For Bosch: GBH7/45, UBH6/35, UBH12/50, USH6, 11202, 11203, 11204, 11206, 11208, 11209. AEG
(Atlas Copco): PHD26, PH38, PHD38, PH240D, PH350D. Black & Decker: HD2032, HD2038, P8032, P8038.
19mm Hex Shank with Single Flat & Round Tang -
380x3mm (15″x1/8″) MOIL POINT CHISELRead morePower Tool Chisels
Kango Style Chisels
For Kango: 501, 627, 628, 637, 638, 430 – Type 750 shanks.
19mm Hex Shank with Single Flat & Round Tang -
380x3mm (15″X1/8″) MOIL POINT CHISELRead morePower Tool Chisels
For Kango: 900K, 928, 950K, 978, 1400.
Hitachi: DH38YD, DH50SA, H55SA.
Makita: HM1200K, HR3850K.
21mm Hex Shank with Single Flat & Round Tang -
380x6mm (15″x1/4″) MOIL POINT CHISELRead morePower Tool Chisels
For Bosch: USH27, USH28, 11304, 11308, 12314
29mm Hex Shank with Single Flat -
380x6mm (15″x1/4″) MOIL POINT CHISELRead morePower Tool Chisels
For Bosch: USH10, 11305, 12312.
19mm Hex Shank with Single Flat -
38mm (1.1/2″) WAD/HOLLOW PUNCHRead moreKennedy Reduced Shank Wad Punches
For a variety of soft materials. Can be used for cutting holes and producing clean edged discs from the material being cut.
-
38mm AL/OX QUICK CHANGE DISCS GRIT 100Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.