Archives: Products
Showing 9361–9376 of 23773 results
-
30mm IMPACT SOCKET 1/2″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Metric, Standard Length, 6-Point
1/2″ Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
30mm IMPACT SOCKET 3/4″ SQ DRRead moreChrome Molybdenum Impact Sockets: 3/4″ Drive Metric, Standard Length, 6-Point
3/4″ Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
30mm LONG MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Long Series
Shank diameter: 19mm/3/4â.
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm. -
30mm MASONRY NAILS (1KG)Read moreMasonry Nails
Corrosion-resistant hardened nails commonly used by carpet fitters, floorlayers, floor fitters and are suitable for general construction applications.
-
30mm MASONRY NAILS (500gm)Read moreMasonry Nails
Corrosion-resistant hardened nails commonly used by carpet fitters, floorlayers, floor fitters and are suitable for general construction applications.
-
30mm O/E PODGER SPANNERRead moreKennedy Open End Podger Spanners
Designed to engage the nut from the side. As it only engages on two faces of the fastener, care must be taken to ensure that the correct size spanner is always used. Tapered handle for assisting with alignment of fixing holes on jigs and fabrications.
-
30mm OFFSET CV COMBINATION SPANNERRead moreKennedy Industrial Offset Combination Spanners – Metric
Metric
Chrome vanadium steel. 15° cranked open end. Offset ring end. Up to 25% longer than conventional DIN 3113 combination spanners. Conform to DIN 3113B. -
30mm OPEN JAW SLOGGING WRENCHRead moreKennedy Open Jaw Slogging Spanners
Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133.
-
30mm OVAL BRAD NAILS (1KG)Read moreOval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
30mm OVAL BRAD NAILS (2KG)Read more
Oval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
30mm OVAL BRAD NAILS (500gm)Read more
Oval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
30mm OVAL BRAD NAILS (5KG)Read more
Oval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
30mm PROFESSIONAL COMBINATION WRENCHRead moreKennedy Professional Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spannermaking for easier cleaning and preventing rust. Long reach, wall drive. Conform with ANSE B107.6. -
30mm RATCHET COMBINATIONWRENCHRead moreKennedy Professional Ratchet Combination Spanners – Metric
Metric
Chrome vanadium steel with mirror polish finish, preventing oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5° movement to operate ratchet. Thin wall design for greater
access. Conform to ASME B107.6. -
30mm RING CRANKED PODGERSPANNERRead moreKennedy Ring End Podger Spanners
Cranked handle assists with location of spanner on to fixings within a recess.
-
30mm RING SLOGGING WRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.