Archives: Products
Showing 9313–9328 of 23773 results
-
305x75mm (12″x3″) WIDE CHISELRead morePower Tool Chisels
Bosch Style Chisels
For Bosch: GBH7/45, UBH6/35, UBH12/50, USH6, 11202, 11203, 11204, 11206, 11208, 11209. AEG
(Atlas Copco): PHD26, PH38, PHD38, PH240D, PH350D. Black & Decker: HD2032, HD2038, P8032, P8038.
19mm Hex Shank with Single Flat & Round Tang -
305x75mm (12″x3″) WIDE CHISELRead morePower Tool Chisels
For Kango: 900K, 928, 950K, 978, 1400.
Hitachi: DH38YD, DH50SA, H55SA.
Makita: HM1200K, HR3850K.
21mm Hex Shank with Single Flat & Round Tang -
305x75mm (12″x3″) WIDE CHISELAdd to cartPower Tool Chisels
Kango Style Chisels
For Kango: 501, 627, 628, 637, 638, 430 – Type 750 shanks.
19mm Hex Shank with Single Flat & Round Tang -
305x75mm (12″x3″) WIDE SDS-MAX CHISELRead moreSDS Max Chisels
High grade forged-steel with shot-blast finish. Suitable for all tools with SDS Max system.
-
308 P20/P30 BRAZED TOOLRead moreKennedy Square Shank Boring Tools Held at 80° in Bar – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
30K-93 KEY CABINET (93 KEYS)Read moreKey Cabinets
All heavy gauge steel construction for secure key storage. Fitted with security lock and supplied complete with two keys. All key hooks are numbered for easier identification. Easily fitted to walls with screws (fixings not supplied).
-
30KG MAG PUSH BUTTON BASERead moreKennedy Push Button Base – 30kg
Fitted as standard to KEN – 333-2080K and – 2100K. Four magnetic faces, bottom, sides and 45° angle face for curved surfaces.
Base dimensions: 48 x 44 x 51mm.
Threaded: M8 x 1.25mm.
Magnetic pull: 30kg. -
30LTR WASTE OIL DRAINER GRAVITY FEEDRead moreKennedy Mobile Waste Oil Drainer
ODB300
This sturdy mobile polyethylene container is for the collection of waste oil draining by gravity from engines/gearboxes. It has a capacity of 30ltr and a float level indicator to let you know when you are nearing its full capacity. The polyamide base is fitted with heavy-duty castors and a handle for easy manoeuvrability. The centre shaft is height adjustable from 900 to 1600mm with a 395mm diameter polypropylene drain pan, the pan is fitted with an anti-splash mesh. -
30M CHALK LINE REELRead moreKennedy Heavy-Duty Chalk Lines – Die Cast Zinc Alloy Case
Die Cast Zinc Alloy Case
With a red satin finish. Complete with folding locking handle. Felt gasket distributes
uniform chalk coating onto line. With sliding hatch for filling. Universal hook attaches to any projection or slot. -
30M COIL HOSE SETRead moreCoil Hose Sets
These hose coil sets come complete with a seven pattern spray gun, heavy duty snap action connectors and a threaded tap connector. It is light in weight, does not kink or tangle and provides superior waterflow control.
Spray patterns:
⢠Soaker.
⢠Mist.
⢠Shower.
⢠Jet.
⢠Flat.
⢠Centre.
⢠Cone. -
30M GARDEN HOSE SETRead more30m Garden Hose Set
30m Standard reinforced garden hose, bore size 13mm. Complete with snap action spray nozzle, female water stop, female fitting and universal tap connector.
-
30M HEAVY DUTY CHALK LINE REEL IN CASERead moreKennedy Heavy-Duty Chalk Lines – Aluminium Alloy Case
Aluminium Alloy Case
With foldaway locking handle. Heavy-duty robust design, complete with universal hook. -
30M HOSE REEL SETRead moreHose Reel Set
This hose reel set comes complete with 30m hose and fittings. It is easy to assemble – snap and click, needs no tools. It can store up to 45m of 16mm hose or 60m of 13mm hose.
-
30M REINFORCED GARDEN HOSE COIL 1/2″ BORERead moreGarden Hoses
Multi-purpose three layer braided garden hose. Five year guarantee. Bore size 13mm.
-
30M/100′ FIBREGLASS MEASURING TAPERead moreLong Tape Measures – Hi-Visibility Case
Flush fitting winding handle with stainless steel hook. The fibre glass tape is a hard wearing material which gives excellent resistance to moisture and able to withstand up to 110kg pull without breaking. 13 x 0.5mm (±0.05mm), vinyl coated with heat sealed markings give longer life. With ½â, 1â, mm and cm graduations.
-
30mm 30SWG FLAT END DE-CARB BRUSHRead moreFlat End Decarbonising Brushes
For hard to reach areas such as drilled holes, recesses and corners. For removalof burrs, rust and paint. 30 SWG