Archives: Products
Showing 9329–9344 of 23773 results
-
30mm 30SWG POINTED END DE-CARB BRUSHRead morePointed End Decarbonising Brushes
For use in high speed air and electrical tools. Ideal for hard to reach areas. For the removal of paint, carbon and for de-burring. 6mm Shanks. 30 SWG
-
30mm ALUMINIUM I.D. DISCS 1-100 (BOX-100)Read moreIdentity Discs
Suitable for all identification uses component/batch labelling, store/user tracking, key identification etc. 30mm outside diameter,
-
30mm ALUMINIUM I.D. DISCS 5mm HOLE (EACH)Read moreIdentity Discs
Suitable for all identification uses component/batch labelling, store/user tracking, key identification etc. 30mm outside diameter,
-
30mm ANNULAR RING SHANK NAILS (1KG)Read moreAnnular Ring Shank Nails
Corrosion resistant, prevents woodstaining. Annular ring shank threads ensure that the boards do not cup, the nail heads do not pop and the nails can be driven flush without crushing the surrounding wood.
-
30mm ANNULAR RING SHANK NAILS (2KG)Read more
Annular Ring Shank Nails
Corrosion resistant, prevents woodstaining. Annular ring shank threads ensure that the boards do not cup, the nail heads do not pop and the nails can be driven flush without crushing the surrounding wood.
-
30mm ANNULAR RING SHANK NAILS (500gm)Read more
Annular Ring Shank Nails
Corrosion resistant, prevents woodstaining. Annular ring shank threads ensure that the boards do not cup, the nail heads do not pop and the nails can be driven flush without crushing the surrounding wood.
-
30mm ANNULAR RING SHANK NAILS (5KG)Read more
Annular Ring Shank Nails
Corrosion resistant, prevents woodstaining. Annular ring shank threads ensure that the boards do not cup, the nail heads do not pop and the nails can be driven flush without crushing the surrounding wood.
-
30mm BRASS IDENTITY DISCS 1-100 (BOX-100)Read moreIdentity Discs
Suitable for all identification uses component/batch labelling, store/user tracking, key identification etc. 30mm outside diameter,
-
30mm BRASS IDENTITY DISCS 5mm HOLE (EACH)Read moreIdentity Discs
Suitable for all identification uses component/batch labelling, store/user tracking, key identification etc. 30mm outside diameter,
-
30mm CARBIDE TIPPED HOLESAWRp304.000Read moreCarbide Tipped Holesaws
Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.
-
30mm CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
30mm DEEP “BI-HEX” SOCKET 1/2″ SQ DRRead moreKennedy Bi-Hexagon Deep Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
30mm DEEP IMPACT SOCKET 1″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive Metric, Deep Length, 6-Point
1â Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
30mm DEEP IMPACT SOCKET 1/2″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Metric, Deep Length, 6-Point
1/2â Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
30mm DEEP IMPACT SOCKET 3/4″ SQ DRRead moreChrome Molybdenum Impact Sockets: 3/4″ Drive Metric, Deep Length, 6-Point
3/4″ Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
30mm DIA. (1.3/16″) BI-METAL HOLESAWRp126.000Read moreConstant Pitch Bi-Metal HSS Holesaws
Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.