Archives: Products
Showing 8065–8080 of 23773 results
-
3.0mm ST/SH SHORT 3FL CARBIDE SLOT DRILL – TICNRead moreSwissTech Carbide Plain 3 Flute Shank Milling Cutters: Series 48, Short Series – TiCN Coated
Series 48 – 3 Flute – Short Series, TiCN Coated
Centre cutting.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
3.0mm ST/SH SHORT 4FL END MILL Q-COATRead moreCarbide Plain Shank End Mills 4 Flute – Series 66 – Short Series – EMQ-4PS Carbide Q-Coat
Series 66 – Short Series
Dimensions to DIN 844. Centre cutting. To Manufacturers standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat.‘Q-Coat’ Coating has been specifically developed to give carbide cutters the ‘edge’ when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.
-
3.0mm ST/SH SHORT B/N CARBIDE END MILLRead moreSwissTech Carbide Plain Shank End Mills 4 Flute Ball Nosed: Series 56, Short – Uncoated
Series 56 – Short Series
Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6.Available as Carbide Uncoated (for general production machining) or TiCN Coated (extends cutter tool life and improves work material surface finish).
-
3.0mm ST/SH SHORT B/N CARBIDE END MILL – TICNRead moreSwissTech Carbide Plain Shank End Mills 4 Flute Ball Nosed: Series 56, Short – TiCN Coated
Series 56 – Short Series, TiCN Coated
Centre cutting. To Manufacturers Standards. Cutting diameter to h10. Shank diameter to h6.Available as Carbide Uncoated (for general production machining) or TiCN Coated (extends cutter tool life and improves work material surface finish).
-
3.0mm ST/SH SHORT CARBIDE END MILLRead moreCarbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMC-4PS CarbideCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMC-4PS Carbide -
3.0mm ST/SH SHORT CARBIDE END MILL – TICNRead moreCarbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMT-4PS TiCN CoatedCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMT-4PS TiCN Coated -
3.0mm T-HANDLE BALL DRIVERRead moreHexagon T-Handle Ball Drivers – Metric
Metric
Manufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort. -
3.0mm T-HANDLED HEXAGON BALL DRIVERRead moreKennedy Pro-Torq T-Handled Hexagon Ball Drivers
Manufactured from hardened carbon steel with a dual material âTâ handle grip for comfort and extra force. The ball drivers can be used at angles of up to 30° for use where access is restricted and the shorter hexagon end is ideal for use when a greater tightening torque is required. Long arm end is ball drive and short arm end plain. Black oxidised finish. Manufactured to ISO2936/DIN911.
-
3.0mm TICN KC3 THROWAWAY CUTTERRp212.000Read moreHSS-Co 5% KC3 3* Flute Throwaway Milling Cutters
With a micro hardness of 3000HV and a maximum working temperature of 400°C, giving them a better resistance to abrasive wear than TiN coated cutters.
Short series
Long Series
-
3.0mm TICN L/S KC3 THROWAWAY CUTTERRead moreHSS-Co 5% KC3 3* Flute Throwaway Milling Cutters
Long Series
-
3.0mm TIN KC3 THROWAWAY CUTTERRead moreHSS-Co 5% KC3 3* Flute Throwaway Milling Cutters
TiN-Coated to allow elevated cutting speeds and help to extend tool life.
Short Series
Long Series
-
3.0mm TIN L/S KC3 THROWAWAY CUTTERRead moreHSS-Co 5% KC3 3* Flute Throwaway Milling Cutters
Long Series
-
3.0mm x 25mm SCREWDRIVER BIT 1/4″ HEXRead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Hexagon
Hexagon
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
3.0mmx6″ T-HANDLED HEXAGON WRENCHRead moreKennedy Hexagon T-Handle Wrenches – Metric
Metric
Manufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort. -
3.0×0.35mm HSS GT STR. FLUTE PLUG TAPRead moreSherwood Metric Fine HSS Ground Thread Taps, Straight Flute – Plug
IS0 529 – Straight Flute Individual Sizes – Plug
Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
-
3.0×0.35mm HSS GT STR. FLUTE SECOND TAPRead moreSherwood Metric Fine HSS Ground Thread Taps, Straight Flute – Second
IS0 529 – Straight Flute Individual Sizes – Second
Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.