Archives: Products
Showing 8033–8048 of 23773 results
-
3.0mm 2FL STANDARD CARBIDE SLOT DRILLRp164.000Read moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 2 Flute: Regular Series, Metric
2 Flute: Regular Series – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm 3FL BALL NOSE CARBIDE END MILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 3 Flute – Regular Series, Metric
Regular Series – 3 Flute – Metric
Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Chatter is also significantly reduced. Centre cutting as standard. Manufactured to Ansi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm 3FL L/S B/NOSE CARBIDE END MILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 3 Flute – Long Series, Metric
Long Series – 3 Flute – Metric
Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Chatter is also significantly reduced. Centre cutting as standard. Manufactured to Ansi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm 3FL L/SERIES CARBIDE END MILLRp585.000Read moreKennedy Carbide Micrograin Plain Shank Slot Drills, 3 Flute – Long Series, Metric
Long Series – 3 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm 3FL STANDARD CARBIDE SLOT DRILLRp191.000Read moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 3 Flute: Regular Series, Metric
3 Flute: Regular Series – Metric
Centre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm 3FL STANDARD CARBIDE SLOT DRILLRp185.000Read moreSherwood Milling Cutters Plain Shank Carbide Micrograin – 3 Flute
Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
3.0mm 45DEG M/FLUTE HI-HELIX END MILL Q-COATRead moreSwissTech Carbide Plain Shank End Mills High Helix
Centre cutting.
To Manufacturers standards.
Cutting diameter to e8.
Shank diameter to h6.
EHQ-6*PR Carbide Q-Coat.
*Number varies according to the number of flutes.Series 72 – Regular Length
-
3.0mm 4FL BALL NOSE CARBIDE END MILLRp356.000Read moreSherwood Solid Carbide Micrograin Plain Shank End Mills 4 Flute Ball Nosed
Regular Series
For maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting as standard. Manufactured to ANSI Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
3.0mm 4FL BALL NOSE CARBIDE END MILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 4 Flute – Regular Series, Metric
Regular Series – 4 Flute – Metric
For maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting as standard. Manufactured to ANSI Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm 4FL DOUBLE END CARBIDE END MILLRead moreKennedy Solid Carbide Micrograin Plain Shank End Mills Double Ended, 4 Flute: Regular Series, Metric
Double Ended – Regular Series – Metric
4 Flute
For maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting. Manufactured to Ansi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm 4FL L/S B/NOSE CARBIDE END MILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 4 Flute – Long Series, Metric
Long Series – 4 Flute – Metric
For maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting as standard. Manufactured to ANSI Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm 4FL L/SERIES CARBIDE END MILLRp669.000Read moreKennedy Carbide Micrograin Plain Shank Slot Drills, 4 Flute – Long Series, Metric
Long Series – 4 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm 4FL STANDARD CARBIDE END MILLRp264.000Read moreSherwood Milling Cutters Plain Shank Carbide Micrograin – 4 Flute
Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
3.0mm 4FL STANDARD CARBIDE END MILLRp272.000Read moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric
4 Flute: Regular Series – Metric
Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
3.0mm BALL POINT HEX BITx25mm 1/4″ HEXRead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Ball Point Hexagon
Ball Point Hexagon
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
3.0mm C/V HEXAGON WRENCHRead moreKennedy CV Hex Keys
Chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L). Supplied in an indexed plastic holder.