Archives: Products
Showing 7473–7488 of 23773 results
-
25mm LONG MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Long Series
Shank diameter: 19mm/3/4â.
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm. -
25mm MASONRY NAILS (1KG)Read moreMasonry Nails
Corrosion-resistant hardened nails commonly used by carpet fitters, floorlayers, floor fitters and are suitable for general construction applications.
-
25mm MASONRY NAILS (500gm)Read moreMasonry Nails
Corrosion-resistant hardened nails commonly used by carpet fitters, floorlayers, floor fitters and are suitable for general construction applications.
-
25mm MICROMETER SETTING RODRead moreOxford Micrometer Setting Standards – Metric
Metric Sizes
For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block. Manufactured to BS 870. -
25mm OVAL BRAD NAILS (1KG)Read moreOval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
25mm OVAL BRAD NAILS (2KG)Read more
Oval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
25mm OVAL BRAD NAILS (500gm)Read more
Oval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
25mm OVAL BRAD NAILS (5KG)Read more
Oval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
25mm PROFESSIONAL COMBINATION WRENCHRead moreKennedy Professional Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spannermaking for easier cleaning and preventing rust. Long reach, wall drive. Conform with ANSE B107.6. -
25mm RATCHET COMBINATIONWRENCHRead moreKennedy Professional Ratchet Combination Spanners – Metric
Metric
Chrome vanadium steel with mirror polish finish, preventing oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5° movement to operate ratchet. Thin wall design for greater
access. Conform to ASME B107.6. -
25mm ROUND WIRE NAILS (1KG)Read moreRound Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
25mm ROUND WIRE NAILS (2KG)Read more
Round Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
25mm ROUND WIRE NAILS (500gm)Read more
Round Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
25mm ROUND WIRE NAILS (5KG)Read more
Round Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
25mm RUBBER HOLDER FOR POWERLOCK DISCSRead moreYork Screw Fitting Disc Holders
Rubber holders to suit screw fitting discs. Supplied complete with 6mm diameter shank.
-
25mm SHORT MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Short Series
Shank diameter: 19mm/3/4â.
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.