Category

Call To +62 31 3330-0020

Category

Archives: Products

Showing 7521–7536 of 23773 results

  • 25mm x 60DEG HSS PLAIN SHANK DOVETAIL CUTTER

    Sherwood – HSS Plain Shank Dovetail Cutters (Single Angle Cutters) – 60° Corner Angle, Metric

    60° Corner Angle – Metric (Form C)
    Designed to produce dovetail slideways in machine tool tables, jigs and fixtures. Bright finish, straight helix. Made to DIN 1833.

    Ø Tolerances
    Metric: +0.25 – 0.00
    Inch: +0.010 – 0.000

    Read more
  • 25mm x 60DEG HSS SC/SH DOVETAIL CUTTER
    Rp1.133.000

    Sherwood HSS Threaded Shank Dovetail Cutters – 60° Corner Angle, Metric

    60° Corner Angle – Metric (Form C)
    Designed to produce dovetail slideways in machine tool tables, jigs and fixtures. Bright finish, straight helix. Made to DIN 1833. Shank to DIN 1835D.

    Metric diameter tolerance: + 0.25 – 0.00

    Read more
  • 25mm XP-90C WELDON END MILL (16)
    Rp3.136.000

    Indexa XP-90C ‘APT’ 90° Shell Mills – For AP_T 16 Inserts

    XP-90C End Mills For AP_T 16 Inserts
    Positive 90° approach milling cutter, using size 10/16 inserts allowing depth passes and high feed per teeth. Torx screw allows for good chip evacuation. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear. Through coolant as standard.
    Insert Size: APXT 16. Feed Per Tooth (Fz) mm: 0.10 – 0.30.

    Read more
  • 25mmx100M LOW TACK PROTECTION TAPE BLACK

    Low Tac Tape

    Black
    An outdoor polythene low-tack protection tape. Suitable for use on mild steels, stainless steels and aluminium. Ideal for short term protection of UPVC and aluminium profiles, window frames and metal ladders.
    Thickness: 0.08mm.
    Tensile strength: 17n/cm.
    Elongation: 350%.
    Steel adhesion: 2.2n/cm.

    Read more
  • 25mmx10M PIPE REPAIR TAPE

    Pipe Repair Tape

    Completely water and UV-resistant. Used to joint and repair a wide range of power and distribution cables up to 46kV. For above and below ground.

    Read more
  • 25mmx121mm O/A HSS-COBALT 4FL PL/SH END MILL

    HSS-Co Plain Shank Milling Cutters 4 Flute, Regular Length – Metric

    Regular Length
    Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

    Metric Tolerances
    Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
    Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000.

    Read more
  • 25mmx12M PTFE THREAD SEALING TAPE EN571

    P.T.F.E. Tape

    Gas Type: 12mm x 5m roll. For gas and hot water pipes (not for potable water). Made to BS EN 751:3.
    Water Type: 12mm x 12m roll. For hot and cold water pipes. Made to BS 6920 & BS 7786.
    P.T.F.E. Thread Sealing Tape: 25mm x 12m roll. Made to EN571.

    Read more
  • 25mmx18M BLACK ANTI-SLIPTAPE

    Anti-Slip Self Adhesive Floor Tape

    Provides extra traction on slippery surfaces such as
    hazardous floor areas, industrial machinery,
    playgroup apparatus, stair treads and various
    other potentially slippery areas. It is designed to
    provide a quick, effective and economical solution
    to the problem with a self-adhesive back for ease
    of installation. It can be used indoors or outdoors
    and is resistant to water, motor oil, detergents,
    solvents and UV light, providing a wide variety of
    anti-slip solutions.

    Read more
  • 25mmx25mm FELT BOB BALL NOSE 6mm SHANK

    Felt Bobs

    Ball Nose (Cone)
    York Felt Bobs are made of pure wool in a variety of sizes, shapes. The mandrels are exactly centered for true-running operation. Suitable for product finishing/polishing with finishing/polishing compounds.

    Read more
  • 25mmx25mm HSS L/S SC/SH B/N SLOT DRILL

    Sherwood HSS Threaded Shank Ball Nosed Slot Drills 2 Flute – Metric

    Long Series Type B230T
    Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30 helix. Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 25mmx25mm HSS L/S SC/SH END MILL

    Sherwood HSS Threaded Shank End Mills 4, 6 & 8 Flute – Metric

    Long Series E430T
    Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00. Tolerance: +0.1250, -0.0000.

    Read more
  • 25mmx25mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 25mmx25mm HSS SC/SH B/N SLOT DRILL

    Sherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric

    Short Series Type B210T
    Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 25mmx25mm HSS SC/SH END MILL

    Sherwood HSS Threaded Shank End Mills Multi Flute – Metric

    Short Series E410T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000.

    Read more
  • 25mmx25mm HSS SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank Slot Drills 2 Flute – Metric

    Short Series S210T – Metric
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 25mmx25mm HSS-COBALT L/SSC/SH END MILL

    Sherwood HSS-Co 5% Threaded Shank End Mills 4, 6 & 8 Flute, Long Series – Metric

    Long Series Type E431T
    Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping