Archives: Products
Showing 7457–7472 of 23773 results
-
25mm GALV CLOUT NAILS (5KG)Read moreGalvanised Clout Nails
Galvanised coated nail. Used by many trades such as roofers, builders and Plasterers etc.
-
25mm GALVANISED WELDED GARDEN MESH 0.9Mx10MRead moreGalvanised Chicken Wire
Made from high quality hot dip galvanised wire. Ideal for use in decoration, fencing, plant support, cages, aviaries, hutches, coops etc.
Mesh size: 25mm. Roll size: 0.9 x 10m. -
25mm HSS-COBALT 2FL ST/SH SLOT DRILL 121mm O/ARp1.125.000Read moreSherwood HSS-Co Plain Shank Milling Cutters 2 Flute – Regular Length
Regular Length
Non-centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A. -
25mm HSS-COBALT 3FL SC/SH SLOT DRILLRead moreSherwood HSS-Co 5% Threaded Shank Slot Drills 3 Flute, Regular Series – Metric
Regular Series Type 5321T
Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000. -
25mm HSS-COBALT L/S SC/SH KNUCKLE RIPPERRead moreSherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Long Series – Inch
Long Series Type K432T
Knuckle Form
For use when high metal removal rates area required. Bright finish. Flute type: 25° spiral, oughing truncated. Shank diameter to js14.Metric Tolerances
Diameter ± 0.127mm -
25mm HSS-COBALT PM L/S WELDON F/P RIPPER TiALNRead moreSwisstech Weldon Shank HSS-E PM TiALN Coated Fine Pitch Ripper Cutters: Series 96, Long
Series 96 – Long Series
Dimensions to DIN 844. Centre cutting. Shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.
-
25mm HSS-COBALT PM L/S WELDON H/HELIX E/MILL TiALNRead moreSwissTech Weldon Shank HSS-E PM TiALN Coated High Helix Cutters: Series 92 – Long
Series 92 – Long Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to k10. Shank diameter to h6.The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.
-
25mm HSS-COBALT PM WELDON F/P RIPPER P/POWERRead moreSwissTech HSS-E PM Coated Fine Pitch Ripper: Series 94, Regular – Peak Power Coated
Series 94 – Regular
Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6. Dimensions to DIN 844.The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds.
Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity.
These cutters are further enhanced by the SwissTech Peak Power? coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.
-
25mm HSS-COBALT SC/SH F/P RIPPERRead moreSherwood HSS-EV Threaded Shank Fine Pitch Ripper Cutters
Regular Series
4 flute ripper cutters. Manufactured from sintered HSS-EV extra vanadium steel. Knuckle form, h8 tolerance. Standard length. Dimensions to DIN 844. Shank to DIN 1835D. -
25mm HSS-COBALT SC/SH KNUCKLE RIPPERRead moreSherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Standard Series – Metric
Standard Series K412T
Knuckle Form
For use when heavy metal removal and good surface finish are required. Uncoated. Bright finish. Flute type: 25° spiral, roughing truncated. Shank diameter to js14.Metric Tolerances
Diameter ± 0.127mm -
25mm HSS-COBALT WELDON 45DEG H/HELIX END MILLRead moreSwissTech Weldon Shank HSS-E PM TiALN Coated 45° High Helix Milling Cutters: Series 90 – Regular
Series 90 – Regular Series
Dimensions to DIN 844. Centre cutting. Shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.
-
25mm HSS-COBALT WELDON C/P RIPPERRp1.202.000Read moreSherwood HSS-E Weldon Shank Coarse Pitch Ripper Cutters
Regular Series
Industrial quality for shaping and forming metal components. 4 flute ripper cutters.
Manufactured from sintered HSS-E extra vanadium steel. Knuckle form, h8 tolerance, standard length. Shank to DIN 1835D. -
25mm HSS-COBALT WELDON F/P RIPPERRead moreSherwood HSS-EV Weldon Shank Fine Pitch Ripper Cutters
Regular Series
4 flute ripper cutters. Manufactured from sintered HSS-EV extra vanadium steel.
Knuckle form. h8 tolerance. Standard length. Dimensions to DIN 844. Shank to DIN 1835D. -
25mm IMPACT SOCKET 1″ SQDRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive Metric, Standard Length, 6-Point
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
25mm IMPACT SOCKET 3/4″ SQ DRRead moreChrome Molybdenum Impact Sockets: 3/4″ Drive Metric, Standard Length, 6-Point
3/4″ Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
25mm LIGHT NARROW BUTT HINGES S/COLOUR (PR)Read moreLight Butt Hinges
For general purpose use and in domestic situations. Self colour. Supplied in pairs.