Archives: Products
Showing 6993–7008 of 23773 results
-
22.5mmx5mm HSS SC/SH WOODRUFF CUTTERRead moreSherwood HSS Threaded Shank Woodruff Cutters – Metric
12mm/Shank Diameter
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850. Shank to DIN 1835/D.Metric Limits of Tolerances:
Diameter +0.000 -0.127.
Width
2 up to 4: – 0.014 -0.028.
4 up to 7: – 0.020 -0.038.
7mm up: – 0.025 -0.047. -
22.5mmx6mm HSS PLAIN SHANK WOODRUFF CUTTERRead moreSherwood HSS Plain Shank Woodruff Cutters
12mm/1/2â Shank Ã
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850.Metric Limits of Tolerances
Diameter: + 0.000 -0.127
Width 2 up to 4: – 0.014 -0.028
Width 4 up to 7: – 0.020 -0.038
Width 7mm up: – 0.025 -0.047 -
22.5mmx6mm HSS SC/SH WOODRUFF CUTTERRead more
Sherwood HSS Threaded Shank Woodruff Cutters – Metric
12mm/Shank Diameter
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850. Shank to DIN 1835/D.Metric Limits of Tolerances:
Diameter +0.000 -0.127.
Width
2 up to 4: – 0.014 -0.028.
4 up to 7: – 0.020 -0.038.
7mm up: – 0.025 -0.047. -
22″ METEOR HAND SAW FINECUT 11 TPIRead moreKennedy Meteor Hand Saw
550mm (22″) hand saw with a high quality hardened and tempered steel blade with specially hardened teeth. Stays sharp longer. Fitted with a bi-material handle with fingerline for comfort and accuracy. Three ground edges per tooth. Cuts on back stroke. Designed to cut chipboard, blockboard, timber, plywood, hardboard, plasterboard, PVC and laminates.
-
22″ METEOR HAND SAW HEAVY DUTY 7 TPIRead moreKennedy Meteor Hand Saw
550mm (22″) hand saw with a high quality hardened and tempered steel blade with specially hardened teeth. Stays sharp longer. Fitted with a bi-material handle with fingerline for comfort and accuracy. Three ground edges per tooth. Cuts on back stroke. Designed to cut chipboard, blockboard, timber, plywood, hardboard, plasterboard, PVC and laminates.
-
22″ SWEDISH PATTERN PIPEWRENCH 90 DEG JAWSRead moreKennedy Swedish Pattern Pipe Wrenches – 90° Type
90° Type
Narrow design for confined areas, used for gripping pipe and nuts. Forged chrome vanadium heat treated steel. Knurled adjusting nut with guiding reinforcement on handle.
Conform to DIN 5234. -
22″ x 8PT HARDPOINT HANDSAWRead moreSitesafe Hardpoint Hand Saw
Hardened and tempered blade. Designed to cut chipboard, blockboard, timber, plywood, hardboard, plasterboard and laminates. Specially hardened teeth to stay sharp longer. Tough handle with fingerline for comfort and accuracy. 8TPI.
-
22″x10PTS PROFESSIONAL HAND SAWRead moreKennedy Professional Hand Saw
Superior quality skew back. Hardened and ground steel with glazed and polished blade, tensioned and fully sprung. Teeth are set and sharpened. Polished handle with brass screws. Supplied in wallet with tooth guard. 10 points per inch.
-
2207 CLAMP SETRp405.000Read moreIndexa Indexable Tooling Spares – Clamp Sets
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki? toolholder you?re using.
-
2209 CLAMP SETRp413.000Read moreIndexa Indexable Tooling Spares – Clamp Sets
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki? toolholder you?re using.
-
220mm SOCKET RAILRead moreKennedy Socket Rails
Made from steel, bright chrome plated and can be fixed or loose in a toolbox, or fitted to a bench or wall. Can be used with any size square drive socket.
-
225-250mm EXTERNAL MICROMETERRead moreOxford Enamelled Frame External Micrometers – Metric
With enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25 – 50mm/1 – 2â and over supplied with setting standard. Manufactured to BS 870. All supplied in a impact resistant fitted plastic case.
-
225mm (9″) ENGINEERS SQUARERead moreEngineerâs Squares
Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade.
Squareness tolerance:
75, 100 and 150mm = ±0.030mm.
225 and 300mm = ±0.040mm.*Supplied in robust case.
-
225mm (9″) ENGINEERS SQUARE BS.939 GRADE BRead moreEngineer’s Squares
Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.
-
225mm (9″) MERINO SHEEPSKIN BONNET TIE ONRead moreSheepskin Bonnets
Genuine 100% natural long lasting sheepskin tie-on bonnets for professional use. For polishing metal, glass fibre, wood and painted surfaces. With tie cord. Maximum 2,500rpm – Best results are obtained with a tool speed of 1,500 – 2,000rpm. Not suitable for wet use. Support pads supplied separately,
see below.
Merino Sheepskin Bonnets
With a unique double skin making this the longest lasting bonnet we know. For professional use. 32mm pile. -
225mm MICROMETER SETTINGRODRead moreOxford Micrometer Setting Standards – Metric
Metric Sizes
For setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block. Manufactured to BS 870.