Archives: Products
Showing 7009–7024 of 23773 results
-
225mm POLYCARBONATE VISORRead moreHead Protection System: Safety Visor
Safety Visor
Clear, polycarbonate visor for use (only) with Tuffsafe Visor Carrier and Vented Safety Helmets. Optical class 1.
Conforms to: EN 166 (2001).
Size: 225mm.Ear defenders, visor carrier and visor supplied separately.
All items sold separately“Mix and Match” with accessories listed below or with any other PPE to create a tailored system for all applications
and trades.
All items are sold separately. -
225mm/9″ METAL PAINT ROLLER TRAYRead morePaint Trays
The rigid drain off area helps remove the excess paint from the roller preventing drips and evenly coating your paint roller.
Dimensions (L x W x D: 400 x 290 x 60mm). -
225mm/9″ PLASTIC PAINT ROLLER TRAYRead morePaint Trays
The rigid drain off area helps remove the excess paint from the roller preventing drips and evenly coating your paint roller.
Dimensions (L x W x D: 400 x 290 x 60mm). -
22mm (7/8″) WAD HOLLOW PUNCHRead moreKennedy Straight Shank Hollow Punches
Manufactured from hardened carbon steel. Through body ejection of the punched material makes them ideal for punching clean edged holes in leather, wood, plastics, card and paper.
-
22mm AUTO COPPER PIPE CUTTERRead moreKennedy Automatic Pipe Cutters
These robust pipe cutters will cut copper, brass, aluminium, PVC and thin-wall conduit.
They automatically tighten and cut when turned around the pipe. The compact design makes them ideal for working in confined spaces. -
22mm CARBIDE TIPPED HOLESAWRead moreCarbide Tipped Holesaws
Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.
-
22mm CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
22mm DEEP IMPACT SOCKET 1/2″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Metric, Deep Length, 6-Point
1/2â Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
22mm DEEP IMPACT SOCKET 3/4″ SQ DRRead moreChrome Molybdenum Impact Sockets: 3/4″ Drive Metric, Deep Length, 6-Point
3/4″ Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
22mm DEEP SOCKET 1/2″ SQDRRead moreKennedy Bi-Hexagon Deep Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
22mm DEEP SOCKET 3/8″ SQ. DRIVERead moreYamoto Bi-Hexagon Deep Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
22mm DEEP SOCKET 3/8″ SQDRRead moreKennedy Bi-Hexagon Deep Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a
one-twelfth turn to engage the next point of the socket. -
22mm DIA. (7/8″) BI-METAL HOLESAWRp98.000Read moreConstant Pitch Bi-Metal HSS Holesaws
Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.
-
22mm DIA. (7/8″) BI-METAL V/P HOLESAWRp98.000Add to cartVariable Pitch Bi-Metal HSS Holesaws
For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth. -
22mm DIN 472 INTERNAL CIRCLIPS (PACK 25)Read moreQualfast Circlips: Internal
Circlips simplify designs and linked with lower installation costs are the ideal item for
replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. Internal DIN 472. -
22mm DIN CONNECTOR FOR SOLENOID COILSRead moreKennedy Connector for Valve Coils
ISO 6952/B connector.
Nominal size: 22mm
For use with all makes of DIN 43650 coils.
IP65 – EN 60529
Cable fitting: M16 x 1,5.