Archives: Products
Showing 6945–6960 of 23773 results
-
21mm PROFESSIONAL COMBINATION WRENCHRead moreKennedy Professional Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spannermaking for easier cleaning and preventing rust. Long reach, wall drive. Conform with ANSE B107.6. -
21mm RATCHET COMBINATIONWRENCHRead moreKennedy Professional Ratchet Combination Spanners – Metric
Metric
Chrome vanadium steel with mirror polish finish, preventing oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5° movement to operate ratchet. Thin wall design for greater
access. Conform to ASME B107.6. -
21mm REVERSIBLE COMBINATION SPANNERRead moreKennedy Professional Reversible Combination Spanner – Metric
Metric
Bi-hexagonal 15 degree offset rings with a 72 teeth lever ratcheting system that requires only 5 degree movement to operate, making them ideal for use in tight areas. Made from high quality Chrome Vanadium Steel with mirror polish finish to prevent oil and dirt from adhering to the spanner. Heads conform to ASME B107.6. -
21mm SHORT MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Short Series
Shank diameter: 19mm/3/4â.
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm. -
21mm SINGLE HEX SOCKET 1/2″ SQ DRRead moreKennedy Single-Hexagon Standard Length Sockets, 1/2″
Single-Hexagon Sockets
Six point – offer a more positive location, particularly on worn or rounded nuts, but require a one-sixth turn to engage the next point of the socket. -
21mm SOCKET 1/2″ SQ DRRead moreKennedy Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
21mm SOCKET 1/2″ SQUARE DRIVERead moreYamoto Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
21mm SOCKET 3/8″ SQ DRRead moreKennedy Bi-Hexagon Standard Length Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
21mm SOCKET 3/8″ SQ. DRIVERead moreYamoto Bi-Hexagon Standard Length Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
21mm SPARK RESISTANT COMBINATION SPANNER Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Combination Spanners
Combination Spanners
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
21mm SPARK RESISTANT SOCKET 1/2″ SQ. DR Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Sockets
Sockets
12 point bi-hexagon.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
21mm SPARK RESISTANT SOCKET 3/4″ SQ. DRIVE Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Sockets
Sockets
12 point bi-hexagon.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
21mm WHEEL NUT IMPACT SOCKET 1/2″ SQ. DR.Read moreKennedy Impact Wheel Nut Sockets 1/2″ Sq. Dr.
Socket sizes: 17, 19 and 21mm.
Colour coded for easy identification. Can be used with retainer rings or pins. -
21mm x 23mm CH/VAN RING SPANNERRead moreKennedy Double Ended Ring Spanners – Metric
Metric
Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth. -
21mm x 23mm CH/VANADIUM O/END SPANNERRead moreKennedy Industrial Open Ended Spanners – Metric
Metric
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth. -
21mm x 23mm PROFESSIONALO/E SPANNERRead moreKennedy Professional Open Ended Spanners
Chrome vanadium steel with a highly polished mirror finish preventing oil and dirt from adhering to the spanner. Made to American Federal Standards, extra thick heads offer higher torque forces to be applied therefore improved performance.
Conform to ASME B107.39