Archives: Products
Showing 6897–6912 of 23773 results
-
21/64″ HSS S/S STUB DRILLRead moreHSS General Purpose Stub Drills – Imperial Sizes
Series S100 – Inch
General purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BSâ328: Part 1: 1986/DIN 1897. -
21/64″ HSS T/S DRILLRead moreGeneral Purpose HSS Taper Shank Drills, 1 Morse Taper – Inch Sizes
Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN.
-
2107 CLAMP SETRp410.000Read moreIndexa Indexable Tooling Spares – Clamp Sets
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki? toolholder you?re using.
-
2109 CLAMP SETRp410.000Read moreIndexa Indexable Tooling Spares – Clamp Sets
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki? toolholder you?re using.
-
210mm DIA. (8.9/32″) BI-METAL HOLESAWRp1.092.000Read moreConstant Pitch Bi-Metal HSS Holesaws
Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.
-
210mm FLEXIBLE SPOUT FOR METAL OIL CANRead moreKennedy Spare Spouts to Suit Metal Oil Cans
Interchangeable
-
210mm HORIZONTAL & VERTICAL INDEX UNIT CHUCKRead moreIndexa Horizontal & Vertical Index Unit Chucks
Ideal for indexing items to be machined in pre-set or manually set incremental angles.
Indexing accuracy 25 seconds. Angular indexing through the graduation ring from
0 to 360 degrees in 1 degree increments. Basic indexing by means of a catch device
permitting divisions of 2, 3, 4, 6, 8, 12 and 24 without disassembly. Fitted with standard three jaw self-centring scroll chuck with two sets of jaws, for inside and outside gripping. -
210mm INSULATED CABLE CROPPERRead moreInsulated Cable Cutters
Manufactured from drop forged high carbon steel with induction hardened blades. Fully insulated to conform with VDE 0680/201, IEC 900 and BS EN 60900 standards for safe electrical applications up to 1000V.
-
210mm SPRING ACTION CLAMPS (SET-4)Read moreKennedy Spring Action Gripper Clamps
The spring-loaded action is designed for speed and convenience, these multiple use clamps are used for holding a workpiece steady, or providing a âthird handâ. One hand operation gripping most materials, from wood to metal without damaging the surface. Durable non marking jaws pivot to hold irregular shaped workpieces and adjust instantly to any angle and shape to be clamped. Tough, durable and lightweight design. Contoured handle for non-slip grip with serrated jaws for extra firm holding.
-
210mm/8.3/8″ LINESMANS PLIERSRead moreSenator Heavy Duty Linesman’s Pliers
Heavy-duty standard manufactured from chrome vanadium steel with a satin finish. Serrated jaws for gripping nuts, bolts, studs etc. Side cutting for wire up to 1.6mm diameter. Also with serrated gripping and crimping jaws behind the head.
-
210mm/8″ LINESMANS COMBINATION PLIERSRead moreYamoto Combination Pliers
Industrial quality chrome vanadium steel, chemically blacked. Particularly useful for engineers and electricians. Serrated jaws for gripping nuts, bolts, studs etc.
-
210x115x31mm MAGNETIC TOOL TRAYRead moreKennedy Magnetic Tool Tray
Steel tool/parts tray with durable hardwearing corrosion-resistant powder coated finish. Suitable for keeping small parts, components and tools near to hand when working on vehicles, domestic appliances and other equipment. Three high strength magnets in protective non-scratch rubber coating.
-
2130 P20/P30 BRAZED TOOLRp661.000Read moreKennedy Cranked Knife Turning Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
2132 K20 BRAZED TOOLRead more
Kennedy Cranked Knife Turning Tools – K20
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
2132 P20/P30 BRAZED TOOLRp706.000Read more
Kennedy Cranked Knife Turning Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
2133 P20/P30 BRAZED TOOLRp706.000Read moreKennedy Cranked Knife Turning Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates.