Archives: Products

Showing 6785–6800 of 23773 results

  • 20mm SOCKET 3/8″ SQ. DRIVE

    Yamoto Bi-Hexagon Standard Length Sockets, 3/8″

    Bi-Hexagon Sockets
    12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket.

    Read more
  • 20mm SQ x 160mm COBALT TOOLBIT
    Rp2.142.000

    HSS Cobalt Toolbits

    5% Cobalt Square Metric
    Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom).

    Read more
  • 20mm SQ x 200mm COBALT TOOLBIT
    Rp2.802.000

    HSS Cobalt Toolbits

    5% Cobalt Square Metric
    Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom).

    Read more
  • 20mm SQUARE x 300mm KEY STEEL

    Kennedy Industrial Key Steel – Square: Metric

    Square – Metric
    High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
    Inch manufactured from: BS46 PART 7 1958 grade steel.
    Length: 300mm and 12”.
    Other sizes available on request.

    Read more
  • 20mm WHITEBOARD MAGNETS ASSORTED COLOURS (PK-10)

    Magnetic Markers

    Round flat top magnets for use on magnetic planning boards, white boards or easels.
    Supplied in packs of 10

    Read more
  • 20mm x 22mm CH/VAN RING SPANNER

    Kennedy Double Ended Ring Spanners – Metric

    Metric
    Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth.

    Read more
  • 20mm x 22mm CH/VANADIUM O/END SPANNER

    Kennedy Industrial Open Ended Spanners – Metric

    Metric
    Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
    DIN 3110: 4 x 5mm to 32 x 36mm, 1/4” x 5/16” to 1 5/16” x 1 5/8” AF.
    ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16” x 1 5/8” to 1 13/16” x 2” AF.
    DIN 3110 & BS192:1982: 1/8” x 3/16” to 1” x 1 1/8” Whitworth.

    Read more
  • 20mm x 22mm PROFESSIONALO/E SPANNER

    Kennedy Professional Open Ended Spanners

    Chrome vanadium steel with a highly polished mirror finish preventing oil and dirt from adhering to the spanner. Made to American Federal Standards, extra thick heads offer higher torque forces to be applied therefore improved performance.
    Conform to ASME B107.39

    Read more
  • 20mm x 45DEG HSS PLAIN SHANK DOVETAIL CUTTER

    Sherwood HSS Plain Shank Dovetail Cutters (Single Angle Cutters) – 45° Corner Angle, Metric

    45° Corner Angle – Metric (Form C)
    Designed to produce dovetail slideways in machine tool tables, jigs and fixtures. Bright finish, straight helix. Made to DIN 1833.

    Ø Tolerances
    Metric: +0.25 – 0.00
    Inch: +0.010 – 0.000

    Read more
  • 20mm x 60DEG HSS PLAIN SHANK DOVETAIL CUTTER

    Sherwood – HSS Plain Shank Dovetail Cutters (Single Angle Cutters) – 60° Corner Angle, Metric

    60° Corner Angle – Metric (Form C)
    Designed to produce dovetail slideways in machine tool tables, jigs and fixtures. Bright finish, straight helix. Made to DIN 1833.

    Ø Tolerances
    Metric: +0.25 – 0.00
    Inch: +0.010 – 0.000

    Read more
  • 20mm x 60DEG HSS SC/SH DOVETAIL CUTTER

    Sherwood HSS Threaded Shank Dovetail Cutters – 60° Corner Angle, Metric

    60° Corner Angle – Metric (Form C)
    Designed to produce dovetail slideways in machine tool tables, jigs and fixtures. Bright finish, straight helix. Made to DIN 1833. Shank to DIN 1835D.

    Metric diameter tolerance: + 0.25 – 0.00

    Read more
  • 20mm XP-90C WELDON END MILL
    Rp3.460.000

    Indexa XP-90C ‘APT’ 90° Shell Mills – For AP_T 10 Inserts

    XP-90C End Mills For AP_T 10 Inserts
    Positive 90° approach milling cutter, using size 10/16 inserts allowing depth passes and high feed per teeth. Torx screw allows for good chip evacuation. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear. Through coolant as standard.
    Insert Size: APXT 10. Feed Per Tooth (Fz) mm: 0.05 – 0.20.

    Read more
  • 20mm XP-90C WELDON END MILL (16)
    Rp3.053.000

    Indexa XP-90C ‘APT’ 90° Shell Mills – For AP_T 16 Inserts

    XP-90C End Mills For AP_T 16 Inserts
    Positive 90° approach milling cutter, using size 10/16 inserts allowing depth passes and high feed per teeth. Torx screw allows for good chip evacuation. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear. Through coolant as standard.
    Insert Size: APXT 16. Feed Per Tooth (Fz) mm: 0.10 – 0.30.

    Read more
  • 20mmx104mm O/A HSS-COBALT 4FL PL/SH END MILL

    HSS-Co Plain Shank Milling Cutters 4 Flute, Regular Length – Metric

    Regular Length
    Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

    Metric Tolerances
    Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
    Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000.

    Read more
  • 20mmx141mm O/A HSS-COBALT 4FL PL/SH END MILL
    Rp1.467.000

    Sherwood HSS-Co Plain Shank Milling Cutters 4 Flute, Long Series – Metric

    Long Series
    Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

    Metric Tolerances
    Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
    Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000.

    Read more
  • 20mmx21mm DOUBLE ENDED BOX SPANNER

    Kennedy Box Spanners – Metric

    Metric
    Manufactured from high quality steel tube. Zinc plated for corrosion resistance, each supplied with tommy bar.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop