Archives: Products
Showing 6817–6832 of 23773 results
-
20×1.50mm HSS GT CONDUIT STR. FLUTE SECOND TAPRp663.000Read moreSherwood Metric Fine HSS Ground Thread Taps, Straight Flute – Second
IS0 529 – Straight Flute Individual Sizes – Second
Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
-
20×1.50mm HSS GT CONDUIT STR. FLUTE TAP SETRp1.995.000Read moreSets of Three
1 each, taper, second and plug lead.
-
20×1.50mm HSS GT CONDUIT STR. FLUTE TAPER TAPRp663.000Read more
Metric Fine
HSS Ground Thread TapsIS0 529
Straight Flute Individual Sizes(1) Diameter and pitch not
mentioned in ISO. -
20×1.50mm HSS GT SPIRAL FLUTE TAPRp1.469.000Read moreSpiral Flute
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
Thread Forms are Class 2 medium fit tolerance.
For all technical and dimensional specifications please refer to our catalogue.
-
20×1.50mm HSS HEXAGON DIE NUTRp654.000Read moreMetric Fine HSS Ground Thread Die Nuts
BS 1127
For use with spanners to clean and repair
existing external screw threads. -
20×1.50mmx1.1/2″ O/D HSSDIERp354.000Read moreMetric Fine HSS Ground
Thread DiesBS 1127
For use in diestocks to produce external screw threads. -
20×1.50mmx2″ O/D HSS DIERp553.000Read moreMetric Fine HSS Ground
Thread DiesBS 1127
For use in diestocks to produce external screw threads. -
20×10.3mm SHACKLE SOLID BRASS PADLOCKRead moreBrass Padlocks
Solid brass body with a hardened steel shackle and a double locking mechanism. For indoor and outdoor use on minimum to medium security items. 20mm: 3 pin cylinder. 30 and 40mm: 4 pin cylinder, 50 and 60mm: 5 pin cylinder. *Single locking only.
-
20×10.3mm SHACKLE SOLID BRASS PADLOCKRead moreBrass – Stainless Steel Shackle
Traditional style brass bodied padlock with a stainless steel shackle and a double locking mechanism. For indoor and outdoor use on many minimum to medium security items. 20mm: 3 pin cylinder, 30 and 40mm: 4 pin cylinder, 50 and 60mm: 5 pin cylinder.
* Single locking only. -
20x100mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
20x10mm 3mm SHANK BRASS WIRE CUP BRUSHRead moreWire Brushes
For the removal of paint, rust and burrs
-
20x10mm 3mm SHANK STEEL WIRE CUP BRUSHRead moreWire Brushes
For the removal of paint, rust and burrs
-
20x13mm SIDE PLATE FOR WIRE WHEELRead moreKennedy Additional Side Plates for Circular Brushes
Additional Side Plates for Circular Brushes
Wire Wheels
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives. -
20x16mm SIDE PLATE FOR WIRE WHEELRead moreKennedy Additional Side Plates for Circular Brushes
Additional Side Plates for Circular Brushes
Wire Wheels
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives. -
20×2.00mm HSS GT STR. FLUTE PLUG TAPRead moreSherwood Metric Fine HSS Ground Thread Taps, Straight Flute – Plug
IS0 529 – Straight Flute Individual Sizes – Plug
Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
-
20×2.00mm HSS GT STR. FLUTE SECOND TAPRead more
Sherwood Metric Fine HSS Ground Thread Taps, Straight Flute – Second
IS0 529 – Straight Flute Individual Sizes – Second
Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.