Archives: Products
Showing 6737–6752 of 23773 results
-
20mm DIA. (25/32″) BI-METAL V/P HOLESAWRp93.000Read moreVariable Pitch Bi-Metal HSS Holesaws
For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth. -
20mm DIA. x 100mm COBALT TOOLBITRp1.335.000Read moreHSS Cobalt Toolbits
5% Cobalt Round Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
20mm DIA. x 160mm COBALT TOOLBITRp2.142.000Read more
HSS Cobalt Toolbits
5% Cobalt Round Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
20mm DIN 471 EXTERNAL CIRCLIPS (PACK 25)Read moreQualfast Circlips: External
Circlips simplify designs and linked with lower installation costs are the ideal item for
replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. External DIN 471. -
20mm DIN 472 INTERNAL CIRCLIPS (PACK 25)Read moreQualfast Circlips: Internal
Circlips simplify designs and linked with lower installation costs are the ideal item for
replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. Internal DIN 472. -
20mm FORSTNER BITRead moreSenator Forstner Bits
For precision hole boring. Self piloting point combined with trepanning style cutting action will produce overlapping holes in any direction. Ideal for scroll and scalloping applications. Suitable for use in bench and pillar drills to bore a wide range of timber, plastics and other materials.
-
20mm GALV ELH CLOUT (FELT) NAILS (1KG)Read moreGalvanised ELH Clout (Felt) Nails
Extra Large Head (ELH) clout nails , galvanised coated mostly used for felt materials i.e. shed roofs etc.
-
20mm GALV ELH CLOUT (FELT) NAILS (2KG)Read more
Galvanised ELH Clout (Felt) Nails
Extra Large Head (ELH) clout nails , galvanised coated mostly used for felt materials i.e. shed roofs etc.
-
20mm GALV ELH CLOUT (FELT) NAILS (500gm)Read more
Galvanised ELH Clout (Felt) Nails
Extra Large Head (ELH) clout nails , galvanised coated mostly used for felt materials i.e. shed roofs etc.
-
20mm GALV ELH CLOUT (FELT) NAILS (5KG)Read more
Galvanised ELH Clout (Felt) Nails
Extra Large Head (ELH) clout nails , galvanised coated mostly used for felt materials i.e. shed roofs etc.
-
20mm HSS L/S SC/SH B/N SLOT DRILLRead moreSherwood HSS Threaded Shank Ball Nosed Slot Drills 2 Flute – Metric
Long Series Type B230T
Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30 helix. Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089 -
20mm HSS L/S SC/SH END MILLRead moreSherwood HSS Threaded Shank End Mills 4, 6 & 8 Flute – Metric
Long Series E430T
Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: up to 38.00. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00. Tolerance: +0.1250, -0.0000. -
20mm HSS L/S SC/SH SLOT DRILLRead moreSherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric
Long Series 5230T
Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089*Based on BS122: Part 4: 1980 though specific diameter is not included.
-
20mm HSS PLAIN SHANK T-SLOT CUTTERRead moreSherwood HSS Plain Shank T-Slot Cutters
Used for machining T-slots on slide tables, fixtures etc. to DIN 650. For milling structural, carburising and heat treated steel up to 900N/mm2. Sizes up to 16mm and 1/2â have 6 flutes and 18mm and 5/8â upwards have 8 flutes. Made to DIN 851. Flute form 12° RH/LH
Metric Limits of Tolerance
Diameter: +0.13 – 0.13
Length: +0.13 – 0.13 -
20mm HSS SC/SH B/N SLOT DRILLRead moreSherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric
Short Series Type B210T
Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089 -
20mm HSS SC/SH END MILLRead moreSherwood HSS Threaded Shank End Mills Multi Flute – Metric
Short Series E410T
Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000.