Archives: Products
Showing 6721–6736 of 23773 results
-
20K-20 KEY CABINET (20 KEYS)Read moreKey Cabinets
All heavy gauge steel construction for secure key storage. Fitted with security lock and supplied complete with two keys. All key hooks are numbered for easier identification. Easily fitted to walls with screws (fixings not supplied).
-
20LTR EURO NESTING BIN BLUE C/W LIDRead moreMatlock Parts, Component & Tool Storage Bins
High strength polypropylene Euro boxes with reinforced corners and rims and integral interlocking hinged lids. Smooth flat base allows silent movement on conveyors making them suitable for use in distribution centres or warehouse storage. All containers feature ergonomic hand grips and can be sealed using security tags.
Available in 20, 40 or 54ltr capacities.
-
20LTR EURO NESTING BIN GREY C/W LIDRead moreMatlock Parts, Component & Tool Storage Bins
High strength polypropylene Euro boxes with reinforced corners and rims and integral interlocking hinged lids. Smooth flat base allows silent movement on conveyors making them suitable for use in distribution centres or warehouse storage. All containers feature ergonomic hand grips and can be sealed using security tags.
Available in 20, 40 or 54ltr capacities.
-
20LTR HEAVY DUTY STEEL JERRY CAN (GREEN)Add to cartKennedy Steel Jerry Cans
Manufactured from 16 swg steel. Suitable for storing petrol. Suitable for storing and transportation of diesel, paraffin and motor oil. With lever type safety sealing cap and integral carrying handle. Painted outside and phosphated internally.
UN Approved, Class 3. -
20LTR KNAPSACK PROFESSIONAL SPRAYERRead moreGarden Knapsack Sprayers
Can be used for left or right handed operation. Spray lance with locking trigger and four adjustable nozzles, that clips onto handle for storage. Pressurising pump handle with grip and storage loop. Pressure release valve. Adjustable webbing shoulder straps.
16ltr capacity
blow-moulded container with filter and fluid level graduations.
20ltr capacity
blow-moulded container with filter and fluid level graduations long reach. -
20LTR PLASTIC JERRY CAN WITH INTERNAL SPOUTRead moreKennedy Non-Approved Fuel Container
Durable polyethylene containers. Diesel, petrol, chemical and oil resistant. Integral rigid
dispensing spout. -
20mm 82DEG HSS-COBALT S/S COUNTERSINKRp584.000Read moreHSS-Co 5% 82° Countersinks
3 Flute – Straight Shank
Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Manufactured to BS 328 : Part 5 : 1983. Inclusive angle 82°. -
20mm 90DEG HSS-COBALT 3FL S/S COUNTERSINKRp578.000Read moreHSS-Co 5% 3 Flute Countersinks – Straight Shank
90° Heavy Duty
Manufactured from HSS-E cobalt steel for deburring and chamfering
of most metals and plastics. Manufactured to BS328 : Part 5 : 1983. -
20mm 90DEG HSS-COBALT 3FL T/S COUNTERSINKRead moreSherwood HSS-Co 5% 3 Flute Countersink – Taper Shank
Suitable for deburring and chamfering most metals and plastics. Manufactured to BS328:Part 5:1983. 90° inclusive angle.
-
20mm 90DEG HSS-COBALT S/S COUNTERSINKRp642.000Add to cartHSS-Co 5% 3 Flute Countersinks – Straight Shank
3 Flute – Straight Shank
Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Manufactured to BS 328 : Part 5 : 1983. Inclusive angle 90°. -
20mm CARBIDE TIPPED HOLESAWRead moreCarbide Tipped Holesaws
Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.
-
20mm CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
20mm DIA 800 GRIT WET & DRY DISC (PK20)Read moreKobe Multi Tool Accessories – Wet & Dry Discs
Suitable for use with Kobe, Dremel and Osaki Multi Tools
Wet & Dry Discs
For use on paints, lacquers and fillers. 800 grit for fine polishing. Supplied in packs of 20. -
20mm DIA BUTTON MAGNETRead moreKennedy Button Magnets
A horseshoe type cylindrical magnet. Opposing poles are at the same end of the magnet separated by a slot. Supplied with a plain bore and keeper. Permanently magnetic.
-
20mm DIA SHALLOW POT MAGNETRead moreShallow Pot Magnets
North polarity in centre separated from opposing pole by a continuous slot. For use in areas of restricted height. Supplied with plain bore fixing hole and keeper. Permanently magnetic.
-
20mm DIA. (25/32″) BI-METAL HOLESAWRp93.000Read moreConstant Pitch Bi-Metal HSS Holesaws
Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.