Archives: Products
Showing 6321–6336 of 23773 results
-
2.5mm 3FL STANDARD CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 3 Flute: Regular Series, Metric
3 Flute: Regular Series – Metric
Centre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
2.5mm 4FL STANDARD CARBIDE END MILLRp319.000Read moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric
4 Flute: Regular Series – Metric
Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
2.5mm BALL POINT HEX BITx25mm 1/4″ HEXRead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Ball Point Hexagon
Ball Point Hexagon
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
2.5mm C/V HEXAGON WRENCHRead moreKennedy CV Hex Keys
Chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L). Supplied in an indexed plastic holder.
-
2.5mm CARBIDE S/S JOBBER DRILLRead moreSolid Carbide Jobber Drills
For drilling steels, cast steels, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy and light metal and abrasive plastic. Point angle 118°. Tolerance of diameter: h7. Tolerance of shank: h6.
Supply unit. All diameters – 1 pce. Manufacturing Standard: DIN 338, DIN338. -
2.5mm CARBIDE S/S STUB DRILLRead moreKennedy Solid Carbide Stub Drills – Metric
Metric
For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured toâDIN 6539.Tolerances:
Cutting Dia. + 0.000mm – 0.015mm.
Shank Dia. + 0.000mm – 0.030mm. -
2.5mm HEXAGON BALL DRIVERRead moreHexagon Ball Drivers – Metric
Metric
Can be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle. -
2.5mm HEXAGON C/V L-WRENCH BALL DRIVERRead moreKennedy CV Ball Drivers
Manufactured from chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L). Set supplied in an indexed plastic holder. Individual hexagon key slots help to instantly identify missing drivers.
-
2.5mm HEXAGON L-WRENCH BALL DRIVERRead moreBall Driver L-Wrenches – Metric
Metric
Manufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end allows up to 30° work offset. Long arm end is ball drive and short arm end plain. Black oxidised finish. -
2.5mm HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches: Metric – Standard Length
Metric – Standard Length
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. -
2.5mm HSS L/S SC/SH SLOT DRILLRead moreSherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric
Long Series 5230T
Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089*Based on BS122: Part 4: 1980 though specific diameter is not included.
-
2.5mm HSS SC/SH B/N SLOT DRILLRead moreSherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric
Short Series Type B210T
Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089 -
2.5mm HSS SC/SH END MILLRead moreSherwood HSS Threaded Shank End Mills Multi Flute – Metric
Short Series E410T
Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000. -
2.5mm HSS SC/SH SLOT DRILLRead moreSherwood HSS Threaded Shank Slot Drills 2 Flute – Metric
Short Series S210T – Metric
Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089 -
2.5mm HSS-COBALT KC3 THROWAWAY CUTTERRead moreHSS-Co 5% KC3 3* Flute Throwaway Milling Cutters
For high volume production. Compatible with standard automatic locking chucks and spindle adaptors (available on request).
Short series
-
2.5mm HSS-COBALT L/S KC3 THROWAWAY CUTTERRead moreHSS-Co 5% KC3 3* Flute Throwaway Milling Cutters
Long Series
Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.