Archives: Products
Showing 6273–6288 of 23773 results
-
2.4V 0.75A KRYPTON BULB 2-PCE SETRead moreBulbs
To suit Edison pocket mini torches and security flashlights
-
2.4V 0.85A XENON BULB 2-PCE SETRead moreBulbs
To suit Edison pocket mini torches and security flashlights
-
2.4x40mm FLAT PRO-TORQ PRECISION SCREWDRIVERRead moreKennedy Pro-Torq Precision Screwdrivers – Parallel Tip
Expert quality, hardened and tempered chrome alloy steel blades with black magnetic tips. Fitted Âwith a unique dual grip handle with revolving top designed for added user comfort whilst allowing more torque to be applied.
Parallel Tip
Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head. -
2.4x75mm FLAT PRO-TORQ PRECISION SCREWDRIVERRead moreKennedy Pro-Torq Precision Screwdrivers – Parallel Tip
Expert quality, hardened and tempered chrome alloy steel blades with black magnetic tips. Fitted Âwith a unique dual grip handle with revolving top designed for added user comfort whilst allowing more torque to be applied.
Parallel Tip
Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head. -
2.5 SCR SHORT 2FL SLOT DRILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 28, Short – Uncoated
Series 28 – Short Series
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.5 WELDON SHORT 2FL SLOT DRILL-8% CORp363.000Read moreSwissTech HSS-Co 8% Weldon Shank Slot Drills 2 Flute: Series 01, Short – Uncoated
Series 01 – Short Series
Dimensions to DIN 327. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.5 WELDON SHORT 2FL SLOT DRILL-TICN-8% CORead moreSwissTech HSS-Co 8% Weldon Shank Slot Drills 2 Flute: Series 01, Short – TiCN Coated
Series 01 – Short Series, TiCN Coated
Dimensions to DIN 327. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.5-9.0mm BAR TYPE TAP WRENCHRead moreKennedy Bar Type Tap Wrenches
Ductile steel body with a knurled locking nut ensuring no loss of grip during use.
-
2.5-TONNE LOW PROFILE TROLLEY JACKRead more2.5 Tonne Low Profile Trolley Jack
Low Profile Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The pump handle with
comfort rubber grip is to rapidly raise and lower the load arm and the vehicle. For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place. -
2.5/16″ A/F OPEN JAW SLOGGING WRENCHRead moreKennedy Open Jaw Slogging Spanners
Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133.
-
2.5/16″ A/F RING SLOGGING WRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
-
2.5/8″ A/F OPEN JAW SLOGGING WRENCHRead moreKennedy Open Jaw Slogging Spanners
Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133.
-
2.5/8″ A/F RING SLOGGINGWRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
-
2.50mm CARBIDE S/S JOBBER DRILLRp139.000Read moreSolid Carbide Jobber Drills
General purpose drills for drilling a wide variety of metallic and non-metallic materials.
Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce.
Manufacturing Standard: BS 328, DIN 338. -
2.50mm CARBIDE S/S STUB DRILLRp103.000Read moreSolid Carbide Stub Drills – Metric
Metric
For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
Manufactured to Works Standard. -
2.50mm DIA COBALT DRILL FOR STAINLESS STEELRp27.000Read moreHSS-Co Straight Shank Drills
Metric
Heavy duty drill made of 8% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm2, very hard bronze, stainless steels as well as heat and acid resistant steels. Point angle: 135°. Helix angle: normal. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Supply unit. All diameters – 1 pce. Manufacturing Standard: BS 328, DIN 338B.