Archives: Products
Showing 6369–6384 of 23773 results
-
2.5x100mm NATURAL CABLE TIES (PKT-100)Read moreEdison Cable Ties
Suitable for securing or retaining cables and objects of various shapes and sizes. Tensile
strengths of 8 to 22kg. Heat resistant from 40°C to 85°C. Supplied in pack of 100. -
2.5x10mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
2.5x12mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
2.5x160mm BLACK CABLE TIES (PKT-100)Add to cartEdison Cable Ties
Suitable for securing or retaining cables and objects of various shapes and sizes. Tensile
strengths of 8 to 22kg. Heat resistant from 40°C to 85°C. Supplied in pack of 100. -
2.5x160mm NATURAL CABLE TIES (PKT-100)Read moreEdison Cable Ties
Suitable for securing or retaining cables and objects of various shapes and sizes. Tensile
strengths of 8 to 22kg. Heat resistant from 40°C to 85°C. Supplied in pack of 100. -
2.5×20.0 2FL LONG REACH SLOT DRILL Q-COATRead moreCarbide Plain Shank Slot Drills 2 Flute
Centre cutting.
To Manufacturers Standards.
Cutting diameter to h10.
Shank diameter to h6.
Carbide Q-Coat.Series 74 – Long Reach
Carbide Q-Coat. -
2.5x200mm BLACK CABLE TIES (PKT-100)Read moreEdison Cable Ties
Suitable for securing or retaining cables and objects of various shapes and sizes. Tensile
strengths of 8 to 22kg. Heat resistant from 40°C to 85°C. Supplied in pack of 100. -
2.5x200mm NATURAL CABLE TIES (PKT-100)Read moreEdison Cable Ties
Suitable for securing or retaining cables and objects of various shapes and sizes. Tensile
strengths of 8 to 22kg. Heat resistant from 40°C to 85°C. Supplied in pack of 100. -
2.5x6mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
2.5x75mm FLAT VDE DUAL GRIP SCREWDRIVERRead more1000V Dual Grip VDE Screwdrivers: Parallel Tip
A fully insulated screwdriver VDE tested up to 1000V. Professional high grip handles, magnetic tips, chrome vanadium steel blades.
Parallel Tip
Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head. -
2.5x85mm FLAT PARALLEL INSULATED VDE SCREWDRIVERRead moreElectrician’s VDE Square Section Handle Screwdrivers – Parallel Tip
Volt-tested’ to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC. Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.
Parallel Tip
Slotted head screws are the most commonly used screw. The tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping. -
2.5x8mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
2.60mm CARBIDE S/S JOBBER DRILLRp194.000Read moreSolid Carbide Jobber Drills
General purpose drills for drilling a wide variety of metallic and non-metallic materials.
Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce.
Manufacturing Standard: BS 328, DIN 338. -
2.60mm CARBIDE S/S STUB DRILLRead moreSolid Carbide Stub Drills – Metric
Metric
For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
Manufactured to Works Standard. -
2.60mm DIA COBALT DRILL FOR STAINLESS STEELRp25.000Read moreHSS-Co Straight Shank Drills
Metric
Heavy duty drill made of 8% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm2, very hard bronze, stainless steels as well as heat and acid resistant steels. Point angle: 135°. Helix angle: normal. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Supply unit. All diameters – 1 pce. Manufacturing Standard: BS 328, DIN 338B. -
2.60mm H/DUTY COBALT STUB + TiN DRILLRead moreHSS-Co TiN Coated Heavy Duty Stub Drills
Series 2020 Metric
Heavy duty drill made of cobalt material with excellent heat resistance. For drilling steels up to 1,400N/mm2, stainless steel, heat resistant steels and bronze. Ideally suited for volume production on automatics. TiN coating provides longer tool life or increased cutting speeds. Point angle: 135°, helix angle: normal, web thickness: strengthened,
tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328, DIN 1897RN. Point to DIN 1412C.