Archives: Products
Showing 6065–6080 of 23773 results
-
2.0 WELDON STD END MILL-8% CORp512.000Read moreSwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 09, Regular – Uncoated
Series 09 – Regular Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON STD END MILL-TiALN-8% CORead moreSwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 09, Regular – TiALN Coated
Series 09 – Regular Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON STD END MILL-TICN-8% CORead moreSwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 09, Regular – TiCN Coated
Series 09 – Regular Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0-1.0 ER16 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
2.0-1.0 ER25 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
2.0-10.0mm T-HANDLED HEXAGON BALL DRIVER SET (8PC)Read moreKennedy Pro-Torq T-Handled Hexagon Ball Drivers – 8 Piece Set
Manufactured from hardened carbon steel with a dual material âTâ handle grip for comfort and extra force. The ball drivers can be used at angles of up to 30° for use where access is restricted and the shorter hexagon end is ideal for use when a greater tightening torque is required. Long arm end is ball drive and short arm end plain. Black oxidised finish. Manufactured to ISO2936/DIN911.
8 Piece Set
Contents: 2.0, 2.5, 3, 4, 5, 6, 8 and 10mm. -
2.0-2.8mm UK CHUCK TYPE TAP WRENCH-STANDARDRead moreKennedy Chuck Style Tap Wrenches
English Type
Used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces. Heavy duty ductile steel body with knurled chuck, four equalising jaws to hold the tap true and sliding T-bar which can be used when tapping against a shoulder or other obstructions. Individually boxed. -
2.0-4.0mm JIS CHUCK TYPE TAP WRENCH-SLIM LINERead moreKennedy Chuck Type Tap Wrench Set – Japanese Type
Japanese Type
Used in Hand Tapping operations and provide the reach and leverage needed for accurate tapping. Heavy duty ductile steel body with knurled chuck, stepped chuck jaws and four point clamping increase the range of tap sizes which can be used in the wrench fitted with a fixed T-bar. Individually boxed. -
2.0-6.0″ DIAL BORE GAUGERead moreOxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mmType – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″ -
2.0-7.2mm BAR TYPE TAP WRENCHRead moreKennedy Bar Type Tap Wrenches
Ductile steel body with a knurled locking nut ensuring no loss of grip during use.
-
2.0-8.0mm UK CHUCK TYPE TAP WRENCH SET 5-PCERead moreKennedy Chuck Type Tap Wrench Set – English Type
English Type
Contents:
Standard length: 1.5 – 2.8, 2.2 – 5.0, 3.5 – 9.0mm.
Extra length: 2.2 – 5.0, 3.5 – 9.0mm. -
2.00 CARAT DIAMOND DRESSERRead moreSenator Diamond Dressers
For truing and dressing grinding wheels. Truing is the process of aligning the periphery of the grinding wheel so that it runs concentric with its axis of rotation. This allows accurate and precise relative motion between the grinding wheel and the part being ground. Dressing removes dulled abrasives and foreign material that has been embedded into the wheel. This allows the wheel to cut properly. These tools are mainly used to true straight-faced wheels.
3 Piece Set
For medium-duty use. 1/2â dia. x 6â (- 9100K). -
2.00mm CARBIDE S/S JOBBER DRILLRp110.000Read moreSolid Carbide Jobber Drills
General purpose drills for drilling a wide variety of metallic and non-metallic materials.
Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce.
Manufacturing Standard: BS 328, DIN 338. -
2.00mm CARBIDE S/S STUB DRILLRp103.000Read moreSolid Carbide Stub Drills – Metric
Metric
For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
Manufactured to Works Standard. -
2.00mm DIA COBALT DRILL FOR STAINLESS STEELRp20.000Add to cartHSS-Co Straight Shank Drills
Metric
Heavy duty drill made of 8% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm2, very hard bronze, stainless steels as well as heat and acid resistant steels. Point angle: 135°. Helix angle: normal. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Supply unit. All diameters – 1 pce. Manufacturing Standard: BS 328, DIN 338B. -
2.00mm DIA HSS S/S R-F JOBBER DRILLRp31.000Read moreSenator HSS Roll Forged Jobber Drills – Metric
Metric
Senator jobber drills are roll forged from HSS, ensuring uninterrupted grain structure. This provides exceptional strength and durability. Tips are ground for effective cutting. Suitable for drilling wood, plastic, carbon and plain steels where the cutting efficiency of ground flute is not required. Manufactured to BS 328 : Part 1 : 1986 & DIN 338 Type N.