Archives: Products
Showing 6049–6064 of 23773 results
-
2-TONNE LOW PROFILE LONGREACH TROLLEY JACKRead more2 Tonne Low Profile Long Reach Trolley Jack
Low Profile Long Reach Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction castors, swivel castors and inside wheel ensure excellent manoeuvrability and easy positioning under the vehicle prior to lifting. The foot pedal is to rapidly raise and lower the load arm and the vehicle. The long reach pump handle has a comfort rubber grip. Includes a practical tray for carrying tools and a rubber pad for the saddle. For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place. -
2-TONNE LOW PROFILE SERVICE JACKRead more2 Tonne Low Profile Service Trolley Jack
Low Profile Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The pump handle with comfort rubber grip is to rapidly raise and lower the load arm and the vehicle. For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place.
-
2-TONNE TROLLEY JACK WITH CASERead moreTrolley Jack
Strong steel chassis provides stability when under load. Fixed direction castors and swivel castors for easier positioning under vehicles. Long reach single piece pump handle with comfort rubber for rapid raising and lower. Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle. GS and TUV approved.
T238
Type: with case.
Dimensions: 525 x 225 x 145mm.
Maximum load: 2,000kg.
Minimum height: 130mm.
Maximum height: 380mm.T2.249
Type: with case.
Dimensions: 695 x 344 x 180mm.
Maximum load: 2,250kg.
Minimum height: 145mm.
Maximum height: 495mm.T280
Type: long reach.
Dimensions: 1150 x 360 x 210mm.
Maximum load: 2,000kg.
Minimum height: 140mm.
Maximum height: 800mm. -
2-WAY MALE SNAP ACTION CONNECTORRead more2 Way Male Snap Action Connector
This fitting is for connecting two hoses with both having female fittings on the end.
-
2.0 SCR SHORT 2FL SLOT DRILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 28, Short – Uncoated
Series 28 – Short Series
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 SCR STD END MILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 36, Regular – Uncoated
Series 36 – Regular Series
Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON LONG 2FL SLOT DRILL-8% CORead moreSwissTech HSS-Co 8% Weldon Shank Slot Drills 2 Flute: Series 03, Long – Uncoated
Series 03 – Long Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON SHORT 2FL B/NOSE S/DRILL-8% CORead moreSwissTech HSS-Co 8% Weldon Shank Ball Nose Slot Drills 2 Flute: Series 11, Short – Uncoated
Series 11 – Short Series
Dimensions to DIN 327. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON SHORT 2FL B/NOSE S/DRILL-TICN-8% CORead moreSwissTech HSS-Co 8% Weldon Shank Ball Nose Slot Drills 2 Flute: Series 11, Short – TiCN Coated
Series 11 – Short Series, TiCN Coated
Dimensions to DIN 327. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON SHORT 2FL SLOT DRILL-8% CORp331.000Read moreSwissTech HSS-Co 8% Weldon Shank Slot Drills 2 Flute: Series 01, Short – Uncoated
Series 01 – Short Series
Dimensions to DIN 327. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON SHORT 2FL SLOT DRILL-TiALN-8% CORead moreSwissTech HSS-Co 8% Weldon Shank Slot Drills 2 Flute: Series 01, Short – TiALN Coated
Series 01 – Short Series, TiALN Coated
Dimensions to DIN 327. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON SHORT 2FL SLOT DRILL-TICN-8% CORead moreSwissTech HSS-Co 8% Weldon Shank Slot Drills 2 Flute: Series 01, Short – TiCN Coated
Series 01 – Short Series, TiCN Coated
Dimensions to DIN 327. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON SHORT 3FL SLOT DRILL-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 05, Short – Uncoated
Series 05 – Short Series
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON SHORT 3FL SLOT DRILL-TiALN-8% CORead moreSwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 05, Short – TiALN Coated
Series 05 – Short Series, TiALN Coated
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON SHORT 3FL SLOT DRILL-TICN-8% CORead more
SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 05, Short – TiCN Coated
Series 05 – Short Series, TiCN Coated
Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
2.0 WELDON STD 2FL SLOT DRILL-8% CORead moreSwissTech HSS-Co 8% Weldon Shank Slot Drills 2 Flute: Series 02, Regular – Uncoated
Series 02 – Regular Series
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).