Archives: Products
Showing 5825–5840 of 23773 results
-
19.5mmx4mm HSS SC/SH WOODRUFF CUTTERRead moreSherwood HSS Threaded Shank Woodruff Cutters – Metric
12mm/Shank Diameter
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850. Shank to DIN 1835/D.Metric Limits of Tolerances:
Diameter +0.000 -0.127.
Width
2 up to 4: – 0.014 -0.028.
4 up to 7: – 0.020 -0.038.
7mm up: – 0.025 -0.047. -
19.5mmx5mm HSS PLAIN SHANK WOODRUFF CUTTERRead moreSherwood HSS Plain Shank Woodruff Cutters
12mm/1/2â Shank Ã
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850.Metric Limits of Tolerances
Diameter: + 0.000 -0.127
Width 2 up to 4: – 0.014 -0.028
Width 4 up to 7: – 0.020 -0.038
Width 7mm up: – 0.025 -0.047 -
19.5mmx5mm HSS SC/SH WOODRUFF CUTTERRead more
Sherwood HSS Threaded Shank Woodruff Cutters – Metric
12mm/Shank Diameter
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850. Shank to DIN 1835/D.Metric Limits of Tolerances:
Diameter +0.000 -0.127.
Width
2 up to 4: – 0.014 -0.028.
4 up to 7: – 0.020 -0.038.
7mm up: – 0.025 -0.047. -
19.5mmx6mm HSS PLAIN SHANK WOODRUFF CUTTERRead more
Sherwood HSS Plain Shank Woodruff Cutters
12mm/1/2â Shank Ã
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850.Metric Limits of Tolerances
Diameter: + 0.000 -0.127
Width 2 up to 4: – 0.014 -0.028
Width 4 up to 7: – 0.020 -0.038
Width 7mm up: – 0.025 -0.047 -
19.5mmx6mm HSS SC/SH WOODRUFF CUTTERRead more
Sherwood HSS Threaded Shank Woodruff Cutters – Metric
12mm/Shank Diameter
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850. Shank to DIN 1835/D.Metric Limits of Tolerances:
Diameter +0.000 -0.127.
Width
2 up to 4: – 0.014 -0.028.
4 up to 7: – 0.020 -0.038.
7mm up: – 0.025 -0.047. -
19″ BARN TYPE TOOL BOXRead moreKennedy Barn-Type Tool Boxes
Manufactured from heavy gauge steel of rigid construction for continuous industrial use. Large base compartment for larger items and removable tote tray for smaller and most
used items. Hard wearing cellulose paint finish. Two piece lid doors that overlap with padlock hole for added security. Full width piano hinges provide rigidity and strength. Supplied with fixed carry handle on the lid. -
19″ EXTENSION TUBE FOR 10T COLLISION REPAIR KITRead moreSpare Parts for Hydraulic Body Repair Kits
Body Repair Kit Spares to suit Kennedy Hydraulic Body Repair Kits
-
19″ HEAVY DUTY TOOL BOXRead moreKennedy Heavy-Duty Tool Boxes
Heavy gauge steel, all welded construction. Durable and corrosion resistant two-part epoxy powder paint finish. With quick release lid clasps, padlock hasps and textured carry handles. Full width piano hinges provide rigidity and strength, ensuring smooth operation and additional security. Removable tote tray for smaller tools and components. Can be padlocked for additional security (padlock not included). Supplied with fixed carry handle on the lid.
-
19″ JOINTED SWIVEL HANDLE 3/4″ SQ DR KNURLED GRIPRead moreKennedy Swivel Handle, 3/4″
The hinged link allows operation at varied angles to aid access in restricted areas.
-
19″x1.3/4″x 6TPI HSS ALL HARD HACKSAW BLADESRp644.000Read moreHSS All Hard Power Saw Blades
Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.
Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2â).
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4â to 3/4â).
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16â to 1).
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2â to 1 1/2â).
TPI: 4. Suitable for Section Width: 19mm and above (3/4â and above). -
19″x18″ 49gm YARN FLOORCLOTHS (PK-10)Read moreFloorcloths
General-purpose open knit mixed fibre floor cloth. Size: 450mm x 400mm. Supplied in packs of 10.
-
19/32″ A/F SOCKET 1/2″ SQ DRRead moreKennedy Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
19/32″ HSS 1/2″ PARALLEL SHANK DRILLRead moreHSS Reduced Shank Drills (Blacksmiths)
1/2â parallel shank. General purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2â. Point angle: 118°, helix angle: normal, web thickness: standard, tolerance of diameter: h8, tolerance of shank: 0.01/0.08. Manufactured to works standard.
-
19/32″ HSS S/S JOBBER DRILLRead moreHSS Jobber Drills Steam Tempered – Inch
Series J100
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
19/32″ HSS T/S DRILLRp397.000Read moreSherwood General Purpose HSS Taper Shank Drills, 2 Morse Taper – Inch Sizes
Series T100 – Inch
Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN. -
19/64″ HSS S/S BRIGHT JOBBER DRILLRp500.000Read moreHSS Jobber Drills Metric, Bright Finish – Inch
Series J100 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials.