Archives: Products
Showing 5777–5792 of 23773 results
-
18x200mm FLAT COLD CHISELRead moreKennedy Cold Chisels – Chrome Vanadium: Flat
Flat
Used for cutting and chipping cold metals and brickwork. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals. -
18x200mm SPARK RESISTANT FLAT COLD CHISEL Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Flat Cold Chisels
Flat Cold Chisels
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
18x230mm FLAT COLD CHISELRead more
Kennedy Cold Chisels – Chrome Vanadium: Flat
Flat
Used for cutting and chipping cold metals and brickwork. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals. -
18x255mm CONTRACTOR FLAT COLD CHISELRead moreContractor Flat Cold Chisels
Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals.
-
18x255mm CONTRACTOR FLAT COLD CHISEL C/W GUARDRead moreContractor Flat Cold Chisels
Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals.
-
18x255mm FLAT COLD CHISELAdd to cartKennedy Cold Chisels – Chrome Vanadium: Flat
Flat
Used for cutting and chipping cold metals and brickwork. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals. -
18x305mm FLAT COLD CHISELRead moreKennedy Cold Chisels – Chrome Vanadium: Flat
Flat
Used for cutting and chipping cold metals and brickwork. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals. -
18x455mm FLAT COLD CHISELAdd to cart
Kennedy Cold Chisels – Chrome Vanadium: Flat
Flat
Used for cutting and chipping cold metals and brickwork. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals. -
19 FUNCTION CYCLE TOOLKIT 2-PCERead more20-in-1 Cycle Multi-Tool & Pouch
Superb multi tool for almost every cycling emergency. Robust construction with chrome vanadium steel blades mounted in an attractive plastic and cast steel frame.
Includes:
⢠Hex keys: 2, 2.5, 3, 4, 5, 6 and 8mm.
⢠Ring spanners: 8, 9, 10, 12 and 14mm.
⢠No.2 crosspoint bit.
⢠5mm slotted bit.
⢠2x tyre levers.
⢠3x spoke wrenches: 3.22, 3.33 and 3.45mm.
⢠1x chain rivet extractor. -
19 x 22mm FLARE NUT RINGSPANNERRead moreKennedy Industrial Flared Nut Ring Spanners – Metric
Metric: Conform with ANSI B107.9M.
Conform to ASME B107.4. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc. -
19-40mm EXTERNAL CIRCLIP PLIERSRead moreKennedy Pro-Torq Sprung Circlip Pliers: Straight Jaw – External
Sprung Straight Jaw Circlip Pliers – External
Manufactured from specially selected steels. The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. These are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip. Double polished head and joint. Induction hardened cutting edges. Especially suitable for production line environments where repetitive work is undertaken. -
19-PCE SELECT-A-DRILL SET 1.0-10.0×0.5mmRp801.000Add to cartSherwood HSS Ground Flute ‘Select-A-Drill’ Set, Metric – 19 Pieces
Sherwood Jobber drills are general-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite.
Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
HSS Ground Flute Select-A-Drill Set
HSS Ground Flute jobber drills in a âDial-a-Drillâ style case. With a clear top to view drills. Manufactured to BS328 DIN 338N & ANSI B94 – 11M.
Set contains: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 and 10.0mm. -
19.0-18.0 ER32 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
19.0-18.0 ER40 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
19.00mm 90DEG HSS-COBALT S/S COUNTERSINK DIN335Rp369.000Read moreHSS-Co 5% 90° Countersinks
For all ferrous and non-ferrous metals as well as for hard plastics. General purpose chamfering/deburring and countersinking tool. bright finish, 3 flute, ground all over.
Made to DIN 335. -
19.00mm CARBIDE S/S JOBBER DRILLRead moreSolid Carbide Jobber Drills
General purpose drills for drilling a wide variety of metallic and non-metallic materials.
Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce.
Manufacturing Standard: BS 328, DIN 338.