Archives: Products
Showing 5265–5280 of 23773 results
-
16mm SHORT RATCHET COMBINATION WRENCHRead moreKennedy Short Arm Ratchet Combination Spanners – Metric
Metric
Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms to ANSI 8107.6. -
16mm SINGLE HEX SOCKET 1/2″ SQ DRRead moreKennedy Single-Hexagon Standard Length Sockets, 1/2″
Single-Hexagon Sockets
Six point – offer a more positive location, particularly on worn or rounded nuts, but require a one-sixth turn to engage the next point of the socket. -
16mm SINGLE HEX SOCKET 3/8″ SQ DRRead moreKennedy Single-Hexagon Sockets, 3/8″
Single-Hexagon Sockets
6 point – Offer a more positive location, particularly on worn or rounded nuts, but require a one-sixth turn to engage the next point of the socket. -
16mm SNAP ON SEALS (BOX-1000)Read moreAvon? Seals
Snap On: Placed over the overlapping strap ends.
Lap Over: Must be threaded onto strap before tensioning. -
16mm SOCKET 1/2″ SQ DRRead moreKennedy Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
16mm SOCKET 1/2″ SQUARE DRIVERead moreYamoto Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
16mm SOCKET 3/8″ SQ DRRead moreKennedy Bi-Hexagon Standard Length Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
16mm SOCKET 3/8″ SQ. DRIVERead moreYamoto Bi-Hexagon Standard Length Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
16mm SPARK RESISTANT COMBINATION SPANNER Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Combination Spanners
Combination Spanners
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
16mm SQ x 100mm COBALT TOOLBITRp871.000Read moreHSS Cobalt Toolbits
5% Cobalt Square Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
16mm SQ x 120mm COBALT TOOLBITRp2.143.000Read moreHSS Cobalt Toolbits
5% Cobalt Square Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
16mm SQUARE x 300mm KEY STEELRead moreKennedy Industrial Key Steel – Square: Metric
Square â Metric
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request. -
16mm x 17mm CH/VAN RING SPANNERRead moreKennedy Double Ended Ring Spanners – Metric
Metric
Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth. -
16mm x 17mm CH/VANADIUM O/END SPANNERRead moreKennedy Industrial Open Ended Spanners – Metric
Metric
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth. -
16mm x 17mm PROFESSIONALO/E SPANNERRead moreKennedy Professional Open Ended Spanners
Chrome vanadium steel with a highly polished mirror finish preventing oil and dirt from adhering to the spanner. Made to American Federal Standards, extra thick heads offer higher torque forces to be applied therefore improved performance.
Conform to ASME B107.39 -
16mm x 45DEG HSS PLAIN SHANK DOVETAIL CUTTERRead moreSherwood HSS Plain Shank Dovetail Cutters (Single Angle Cutters) – 45° Corner Angle, Metric
45° Corner Angle – Metric (Form C)
Designed to produce dovetail slideways in machine tool tables, jigs and fixtures. Bright finish, straight helix. Made to DIN 1833.Ã Tolerances
Metric: +0.25 – 0.00
Inch: +0.010 – 0.000