Archives: Products
Showing 5297–5312 of 23773 results
-
16oz CLAW HAMMER FIBRE GLASS SHAFTRead moreCarpenters’ Claw Hammers
Fibreglass Shaft
With textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the userâs hand and wrist. Reduces operator fatigue and the risk of RSI (Repetitive Strain Injury). The high strength of the shaft and head bond make the hammer virtually unbreakable. -
16oz CLAW HAMMER HICKORY SHAFTRead moreCarpenters’ Claw Hammers
Hickory Shaft
With fine grain, forged steel head, hardened and tempered with polished face. -
16oz CLAW HAMMER SOLID STEEL SHAFTRead moreCarpenters’ Claw Hammers
High strength all steel construction with slip resistant and shock absorbing textured
rubber grip for improved user comfort and control. -
16oz CLAW HAMMER STEEL TUBE SHAFTRead moreCarpenters’ Claw Hammers
Tubular Steel Shaft
With textured slip resistant rubber grip. Dampens the impact transmitted through to the userâs hand and wrist. -
16oz CLAW HAMMER WOOD SHAFTRead moreCarpenters’ Claw Hammers
With fine grain, forged steel head, hardened and tempered with polished face.
-
16oz CROSS PEIN HAMMER WOOD SHAFTRead moreCross Pein Hammers
Cross pein hammers are traditionally used by joiners and fitters. Cross pein can be used for setting pins and nails prior to âdriving homeâ with the flat faced pein.
Warrington Hardwood Shaft
Close grained hardwood shaft shaped to comfortably fit in the hand. Forged steel head with ground and polished striking face. -
16×0.5mmx334M RIBBON WOUND STRAPPINGRead moreAvon? Steel Hand Banding Ribbon Wound
Each layer is wound directly over the one below, so that the width of coil is the width of strap. 0.5mm thickness.
Approximate breaking strain:
12mm: 561kg,
16mm: 714kg,
19mm: 846kg.
Approximate reel length:
12mm: 395m,
16mm: 337m,
19mm: 395m. -
16×0.5mmx763M MILL WOUNDSTRAPPINGRead moreAvon? Steel Hand Banding Mill Wound
Each layer oscillates across the layer below, uniformly and tightly across the 63.5mm width of the coil. 0.5mm thickness.
Approximate breaking strain:
12mm: 561kg,
16mm: 714kg,
19mm: 846kg.
Approximate reel length:
12mm: 930m,
16mm: 744m,
19mm: 605m. -
16×1.00mm HSS GT STR. FLUTE PLUG TAPRp446.000Read moreSherwood Metric Fine HSS Ground Thread Taps, Straight Flute – Plug
IS0 529 – Straight Flute Individual Sizes – Plug
Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
-
16×1.00mm HSS GT STR. FLUTE SECOND TAPRp446.000Read moreSherwood Metric Fine HSS Ground Thread Taps, Straight Flute – Second
IS0 529 – Straight Flute Individual Sizes – Second
Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
-
16×1.00mm HSS GT STR. FLUTE TAP SETRp1.340.000Read moreSets of Three
1 each, taper, second and plug lead.
-
16×1.00mm HSS GT STR. FLUTE TAPER TAPRead more
Metric Fine
HSS Ground Thread TapsIS0 529
Straight Flute Individual Sizes(1) Diameter and pitch not
mentioned in ISO. -
16×1.00mm HSS HEXAGON DIE NUTRead moreMetric Fine HSS Ground Thread Die Nuts
BS 1127
For use with spanners to clean and repair
existing external screw threads. -
16×1.00mmx1.1/2″ O/D HSSDIERp376.000Read moreMetric Fine HSS Ground
Thread DiesBS 1127
For use in diestocks to produce external screw threads. -
16×1.50mm HSS GT CONDUIT SPIRAL FLUTE TAPRp904.000Read moreSpiral Flute
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
Thread Forms are Class 2 medium fit tolerance.
For all technical and dimensional specifications please refer to our catalogue.
-
16×1.50mm HSS GT CONDUIT SPIRAL POINT TAPRp821.000Read moreMetric Fine HSS Ground Thread Taps
IS0 529 – Spiral Point/Gun Nose
Thread Forms are Class 2 medium fit tolerance.