Category

Call To +62 31 3330-0020

Category

Archives: Products

Showing 5217–5232 of 23773 results

  • 16mm EXTRACTOR SOCKET 3/8″ SQ. DRIVE

    Kennedy Impact 3/8″ Sq. Dr. Extractor Sockets

    Square Drive Impact Extractor Sockets
    Extracts rounded, seized or painted right hand threaded fasteners, the reverse spiral flutes are designed to bite into seized nuts and bolts providing greater grip for extraction. The ejector pin is to drive out the fasteners from sockets, once removed.
    Contents: 10, 11, 12, 13, 14, 15, 16, 17 and 19mm extractor sockets plus ejector pin.

    Read more
  • 16mm FLEX HEAD RATCHET WRENCH

    Kennedy Professional Flex-Head Ratchet Combination Spanners – Metric

    Metric Ratchet Combination Spanners
    Chrome vanadium steel with mirror polish finish, preventing oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5° movement to operate ratchet. Thin wall design for greater access. Head flexes up to 90° in either direction. Conform to ASME B107.6.

    Read more
  • 16mm FLEXI RING END SOCKET 1/2″ S/D

    Kennedy Flexi-Ring End Sockets, 1/2″

    Made from polished chrome vanadium. These tough flexi-ring end sockets are designed to allow access over long studs and for awkwardly positioned nuts and bolts. Swivels through 220°.

    Read more
  • 16mm FORSTNER BIT

    Senator Forstner Bits

    For precision hole boring. Self piloting point combined with trepanning style cutting action will produce overlapping holes in any direction. Ideal for scroll and scalloping applications. Suitable for use in bench and pillar drills to bore a wide range of timber, plastics and other materials.

    Read more
  • 16mm GALVANISED BUCKLES 3.50mm WIRE (BOX-1000)

    Strapping Buckles

    Galvanised buckles for use with polypropylene and composite strapping. Available in three different thicknesses.
    Box quantity: 1000 buckles.

    Read more
  • 16mm GO THROUGH SOCKET

    Kennedy Go-Thru™ Sockets for Ratchet Combination Spanner Set

    Replacement Go-Thru™ Sockets to suit Ratchet Combination Spanner Set
    Quattro 4-in-1 – Q23M: This wrench set for 10 to 19mm applications comprises open ended wrenches, ratchet ring wrenches, Go-Thru™ single hex ratchet wrenches and 1/4”, 3/8” and 1/2” square drive ratchets. All are made from chrome vanadium and are fully plated with a mirror finish. Supplied in a heavy duty fitted metal storage case with locking lid and carry handle.

    Read more
  • 16mm HSS 3FL STR/SHK SP/FL COUNTERBORE
    Rp1.128.000

    HSS Solid Counterbores – Plain Shank

    Plain Shank
    Spiral flute, 3 flute. Medium duty. Used for milling of pre-drilled holes to allow bolt or cap head screws to lie flush with the component surface. Manufactured to BS328: 5:1983.

    Read more
  • 16mm HSS L/S SC/SH B/N SLOT DRILL

    Sherwood HSS Threaded Shank Ball Nosed Slot Drills 2 Flute – Metric

    Long Series Type B230T
    Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30 helix. Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 16mm HSS L/S SC/SH END MILL

    Sherwood HSS Threaded Shank End Mills 4, 6 & 8 Flute – Metric

    Long Series E430T
    Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00. Tolerance: +0.1250, -0.0000.

    Read more
  • 16mm HSS L/S SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric

    Long Series 5230T
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    *Based on BS122: Part 4: 1980 though specific diameter is not included.

    Read more
  • 16mm HSS PLAIN SHANK T-SLOT CUTTER
    Rp2.334.000

    Sherwood HSS Plain Shank T-Slot Cutters

    Used for machining T-slots on slide tables, fixtures etc. to DIN 650. For milling structural, carburising and heat treated steel up to 900N/mm2. Sizes up to 16mm and 1/2” have 6 flutes and 18mm and 5/8” upwards have 8 flutes. Made to DIN 851. Flute form 12° RH/LH

    Metric Limits of Tolerance
    Diameter: +0.13 – 0.13
    Length: +0.13 – 0.13

    Read more
  • 16mm HSS SC/SH B/N SLOT DRILL

    Sherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric

    Short Series Type B210T
    Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 16mm HSS SC/SH END MILL

    Sherwood HSS Threaded Shank End Mills Multi Flute – Metric

    Short Series E410T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000.

    Read more
  • 16mm HSS SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank Slot Drills 2 Flute – Metric

    Short Series S210T – Metric
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 16mm HSS SC/SH T-SLOT CUTTER

    Sherwood T-Slot Cutters Threaded Shank HSS – Metric

    Used for machining T-slots on slide tables, fixtures etc., to DIN 650. For milling structural, carburized and heat treated steel up to 900N/mm2. Sizes up to 16mm and 1/2″ have 6 flutes and 18mm and 5/8″ upwards have 8 flutes. Made to DIN 851. Shank to DIN 1835/D. Flute form 12° RH/LH.

    Metric Limits of Tolerance
    Diameter: +0.13 – 0.13
    Length: +0.13 – 0.13

    Read more
  • 16mm HSS-COBALT 2FL ST/SH SLOT DRILL 123mm O/A
    Rp1.060.000

    Sherwood HSS-Co Plain Shank Milling Cutters 2 Flute – Long Series

    Long Series
    Non-centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping