Archives: Products
Showing 5201–5216 of 23773 results
-
16mm CARBIDE TIPPED HOLESAWRead moreCarbide Tipped Holesaws
Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.
-
16mm CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
16mm CHROME VANADIUM COMBINATION SPANNERRead moreYamoto Industrial Combination Spanners
Made from chrome vanadium steel with polished head and 15° offset. Conform to ASME B107.6.
-
16mm DEE SHACKLE BZP-ELECTRO GALV (PK-2)Read moreDee Shackles
A coupling link for chain and rope with a ?D? shape to prevent excess movement. Material and pin diameters are equal except where stated. Rated loads are for guidance only – ?tested? dee shackles are available to order.
-
16mm DEEP IMPACT SOCKET 1/2″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Metric, Deep Length, 6-Point
1/2â Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
16mm DEEP IMPACT SOCKET 3/8″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 3/8″ Drive Metric, Standard Length, 6-Point
3/8â Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
16mm DEEP SOCKET 1/2″ SQDRRead moreKennedy Bi-Hexagon Deep Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
16mm DEEP SOCKET 3/8″ SQDRRead moreKennedy Bi-Hexagon Deep Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a
one-twelfth turn to engage the next point of the socket. -
16mm DIA BRASS WIRE BOTTLE BRUSH MS TWISTED WIRERead moreTwisted Wire Tube Brush
For industrial maintenance, agricultrial, workshop, machinery etc. For decarbonising and heavy duty cleaning use of tubes, struts, awkward places etc.
-
16mm DIA. (5/8″) BI-METAL HOLESAWRp93.000Read moreConstant Pitch Bi-Metal HSS Holesaws
Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.
-
16mm DIA. (5/8″) BI-METAL V/P HOLESAWRp93.000Read moreVariable Pitch Bi-Metal HSS Holesaws
For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth. -
16mm DIA. x 125mm COBALT TOOLBITRp1.092.000Read moreHSS Cobalt Toolbits
5% Cobalt Round Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
16mm DIA. x 160mm COBALT TOOLBITRp1.335.000Read more
HSS Cobalt Toolbits
5% Cobalt Round Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
16mm DIN 471 EXTERNAL CIRCLIPS (PACK 40)Read moreQualfast Circlips: External
Circlips simplify designs and linked with lower installation costs are the ideal item for
replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. External DIN 471. -
16mm DIN 472 INTERNAL CIRCLIPS (PACK 40)Read moreQualfast Circlips: Internal
Circlips simplify designs and linked with lower installation costs are the ideal item for
replacing more traditional fasteners. Manufactured from carbon steel with a phosphate finish. Internal DIN 472. -
16mm DROP FORGED COMBINATION SPANNERRead moreSenator Combination Spanners – Metric
Manufactured from drop forged steel with 15° cranked heads. Conform to ASME B107.6.