Archives: Products
Showing 16753–16768 of 23773 results
-
DOUBLE FLARING TOOL SET 3/16-5/8″ 9-PCERead moreKennedy Double Flaring Tool Set
Manufactured to double flare soft steel, aluminium and copper tubing up to .040â wall thickness producing SAE 45° flares. Heat treated alloy steel swivel is precision ground and chromed to reduce friction. Heat treated drop forged yoke. Each adaptor is clearly stamped with the size for easy identification. Bright lustre plate finish with contrasting black oxide. Will also produce a single flare.
Sizes: 3/16â, 1/4â, 5/16â, 3/8â, 7/16â, 1/2â, and 5/8â. -
DOUBLE HEAD SUCTION CUP 120mm (70KG)Add to cartKennedy Lever Operated Vacuums
For use in hand lift applications only. Multiple vacuums used on a single load can only improve handling. If using more than one vacuum tool the ratio of maximum lift capacity does not increase. To lift heavier weights a larger vacuum must be used. All are fitted with a rubber suction which will not damage contact surface during the lifting action. For use on glass, tiles, plastic or other smooth surfaced non-porous material and can also be used for pulling out dents. Hand lift only, must not be used in conjunction with mechanical lifting equipment.
-
DOUBLE HOT PLATERead moreDouble Hot Plate
TEC-HP03
Compact and portable hot plate made to current CE specifications. Cast iron element, thermostatic control from simmer to boil in six settings with a durable easy to clean surface. Two hot plates, a 190mm 1.5kW and 160mm 1kW. -
DOUBLE NAIL BAG & COMBI POLYESTER TOOL POUCHRead moreCombination Tool Pouch
Double Nail Bag & Combination Tool Pouch
Heavy duty polyester allows exceptional resistance to punctures or tears. Heavily stitched webbing on belt loop and edges, and double capped riveted for added strength and support. -
DOUBLE PALM H/D RIGGER GLOVES 2″ CUFFS SIZE 10Read moreHeavy Duty Riggers
Reinforced with extra palm, index finger and thumb protection. Selected split leather palms, knuckles and finger tips. 2″ cuff with arterial protection patches. Elasticated backs.
Offers extra protection against low impact on the base of the wrist.
Made from heavier material for greater wear and tear.
Offers extra protection against low impact on the wrist or forearm.
CAT I -
DOUBLE PINION HAND DRILL5/16″ CHUCKRead moreKennedy Double Pinion Hand Drill
Double pinion drill with die cast body and three jaw keyless chuck. Plastic handle with plastic grips and screw top, for bit storage. Used for small drilling operations.
-
DOUBLE POCKET COTTON DRILL APRONRead moreKennedy Carpenterâs Full Bib Apron
100% cotton drill, with cotton neck loop and ties.Two single stitched pockets.
-
DOUBLE WALL CARTON 254x254x254mm (PK-20)Read moreCorrugated Cartons
A range of cartons including some with variable depths that will suit a variety of packaging requirements. Manufactured from high quality fluted corrugated board making them ideal for packaging to be transported by road, rail or air.
-
DOUGHNUT STRETCHERRead moreKennedy Exhaust Doughnut Puller
To enable fast Installation or removal of rubber anti-vibration mounting rings found on modern exhaust systems. Puller has offset hook for easier application and dipped vinyl handle for added comfort and extra grip. Manufactured from hardened steel. Length: 290mm
-
DP2210 10mm PISTOL DRILLRead moreKobe⢠Air Pistol Drill, 10mm
DP2210
10mm Jacobs chuck, stall resistant, heavy duty bearings, 1/2″ HP motor, 3/8″ – 24 spindle thread.Specifications:
Air inlet thread: 1/4″ NPT.
Minimum air hose size (ID): 3/8″(10mm).
Chuck capacity: 10mm.
Spindle thread: 3/8″ – 24.
Air pressure: 90PSI/6.3Bar.
Air consumption: 4CFM* (144 ltr/min).
Sound pressure level: 87dBA.
Sound power level: 103dBA.
Vibration level: 1.5m/s2.
Overall length: 165mm.*Based on a 15 second cycle per minute average use.
-
DP2610 10mm HEAVY DUTY PISTOL DRILLAdd to cartHeavy Duty Pistol Drill 10mm
DP2610
10mm Jacobs chuck, stall resistant, directional front exhaust, hammer finish casing, needle bearing gears, 3/8″ – 24 spindle thread.Air inlet thread: 1/4″ NPT.
Minimum air hose size (ID): 3/8″(10mm).
Chuck capacity: 10mm.
Spindle thread: 3/8″ – 24.
Air pressure: 90PSI/6.3Bar.
Air consumption: 4CFM* (144 ltr/min).
Sound pressure level: 87 dBA.
Sound power level: 103 dBA.
Vibration level: 2.5 m/s2.
Overall length: 180mm.*Based on a 15 second cycle per minute average use.
-
DP513 1/2″ HEAVY DUTY AIR DRILLRead moreHeavy Duty Pistol Drill, 13mm
DP513
13mm Jacobs chuck, high reduction gearbox, high torque, with side handle, 1/2hp motor.
Air inlet thread: 1/4â NPT.
Minimum hose: 3/8â (10mm).
Chuck capacity: 13mm.
Spindle thread: 3/8â – 24.
Air pressure: 90psi/6.3bar.
Air consumption: 4cfm*.
Sound pressure level: 85dBA.
Sound power level: 101dBA.
Vibration level: 5.4m/s2.
Overall length: 180mm.*Based on a 15 second cycle per minute average use.
-
DPP/1 DOUBLE DIAPHRAGM FUEL TRANSFER PUMPRead moreKennedy Double-Diaphragm Fuel Transfer Pump
Heavy-duty aluminium die-cast construction fuel transfer pump with a discharge rate of up to 1 gallon per 5 strokes (800ml per stroke). Stainless steel piston and fuel resistant hi-nitrile rubber diaphragm. 2″ die cast bung adapter and extra heavy-duty steel handle with security locking latch. Pump inlet is fitted with an easy to clean wire mesh screen filter. Telescopic suction tube, adjustable to fit 50 to 205ltr drums, with non-return valve. Easy dispensing through 2.4m (8′) of antistatic neoprene rubber hose with die-cast dispensing nozzle.
-
DPR1810 10mm REVERSIBLE PISTOL DRILLRead moreKobe⢠Reversible Pistol Air Drill, 10mm
DPR1810
10mm Jacobs chuck, stall resistant, heavy-duty bearings, thumb switch for reverse, suitable for screwdriving.
Spindle: 3/8″- 24.
Air inlet thread: 1/4″ NPT.
Minimum air hose size (ID): 3/8″ (10mm).
Chuck capacity: 10mm.
Spindle thread: 3/8″ – 24.
Air pressure: 90psi/6.3bar.
Air consumption: 4cfm* (144ltr/min).
Sound pressure level: 85dBA.
Sound power level: 101dBA.
Vibration level: 5.4m/s2.
Overall length: 165mm.*Based on a 15 second cycle per minute average use.
-
DPR813 13mm REVERSIBLE HEAVY DUTY PISTOL DRILLRead moreKobe⢠Reversible Heavy Duty Pistol Air Drill, 13mm
DPR813
13mm Jacobs chuck, thumb switch for reverse, auxiliary handle, suitable for screwdriving, heavy-duty planetary gearing.
Air inlet thread: 1/4â NPT. Minimum hose : 3/8â (10mm).
Chuck capacity: 13mm. Spindle thread: 3/8â – 24.
Air pressure: 90psi/6.3bar. Air consumption: 4cfm*
Sound pressure level: 89dBA. Sound power level: 101dBA.
Vibration level: 2.5m/s2. Overall length: 178mm.*Based on a 15 second cycle per minute average use.
-
DPTS-2620 TOOL BLOCK FORSIZE 26 BLADERead moreTool Blocks
For use on manual and CNC lathes, this universal style tool block will accurately clamp all parting blades of the corresponding width, 26mm or 32mm. The rigid clamping method allows blades to be set securely for varying depths of cut.
Compatible with Self-Grip âSGFHâ
Do-Grip âDGFHâ
Tang-Grip âTGFHâ
