Archives: Products
Showing 16737–16752 of 23773 results
-
DNMG 150604-NM6 INSERT GRADE QX530Rp284.000Read moreYamaloy Indexable Turning Inserts – DNMG
Grades:
QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.Chip Breaker: NF3. Application: Finish.
Chip Breaker: NSA. Application: Light Cut.
Chip Breaker: NSS. Application: Light/Med Cut.
Chip Breaker: NM4. Application: Med Cut.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: ST. Application: Med Cut.
Chip Breaker: NM7. Application: Med/Rough.
Chip Breaker: NR8. Application: Rough. -
DNMG 150608-NM6 INSERT GRADE QX5030Rp284.000Read moreYamaloy Indexable Turning Inserts – DNMG
Grades:
QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.Chip Breaker: NF3. Application: Finish.
Chip Breaker: NSA. Application: Light Cut.
Chip Breaker: NSS. Application: Light/Med Cut.
Chip Breaker: NM4. Application: Med Cut.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: ST. Application: Med Cut.
Chip Breaker: NM7. Application: Med/Rough.
Chip Breaker: NR8. Application: Rough. -
DOUBLE ACTING MINI CYLINDER 20mm x 100mmRead moreMini ISO Magnetic Cylinders
Series R3M – Double Acting
According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C – 80°C (with dry air -20°C). No load speed: 10 – 1000mm/sec. 1 – 10bar pressure. -
DOUBLE ACTING MINI CYLINDER 20mm x 25mmRead more
Mini ISO Magnetic Cylinders
Series R3M – Double Acting
According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C – 80°C (with dry air -20°C). No load speed: 10 – 1000mm/sec. 1 – 10bar pressure. -
DOUBLE ACTING MINI CYLINDER 20mm x 50mmRead more
Mini ISO Magnetic Cylinders
Series R3M – Double Acting
According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C – 80°C (with dry air -20°C). No load speed: 10 – 1000mm/sec. 1 – 10bar pressure. -
DOUBLE ACTING MINI CYLINDER 20mm x 80mmRead more
Mini ISO Magnetic Cylinders
Series R3M – Double Acting
According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C – 80°C (with dry air -20°C). No load speed: 10 – 1000mm/sec. 1 – 10bar pressure. -
DOUBLE ACTING MINI CYLINDER 25mm x 100mmRead more
Mini ISO Magnetic Cylinders
Series R3M – Double Acting
According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C – 80°C (with dry air -20°C). No load speed: 10 – 1000mm/sec. 1 – 10bar pressure. -
DOUBLE ACTING MINI CYLINDER 25mm x 125mmRead more
Mini ISO Magnetic Cylinders
Series R3M – Double Acting
According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C – 80°C (with dry air -20°C). No load speed: 10 – 1000mm/sec. 1 – 10bar pressure. -
DOUBLE ACTING MINI CYLINDER 25mm x 50mmRead more
Mini ISO Magnetic Cylinders
Series R3M – Double Acting
According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C – 80°C (with dry air -20°C). No load speed: 10 – 1000mm/sec. 1 – 10bar pressure. -
DOUBLE ACTING MINI CYLINDER 25mm x 80mmRead more
Mini ISO Magnetic Cylinders
Series R3M – Double Acting
According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C – 80°C (with dry air -20°C). No load speed: 10 – 1000mm/sec. 1 – 10bar pressure. -
DOUBLE BURR HAND DEBURRING TOOLRp896.000Read moreSwissBurr DB3 Double Burr Hand Deburring Set
SwissBurr hand deburring tools are a fast effective and efficient way of deburring holes, slots and edges. Swiss Burr is a totally modular system of interchangeable handles, holders and blades designed to cover all applications. A choice of HSS or carbide blades, countersinks and scrapers are available to suit your specific application. Swiss Burr blades are also interchangeable with commonly available brands including Kennedy, Noga, Ruko, Seco, Snap-Tap and Stellram.
DB3 Double Burr Hand Deburring Set
For deburring materials with single or double straight edges up to 14.00mm thick, blade holder fitted with safety hand guard.
The DB3 set contains: SWISS+BURR⢠1x ergonomic handle, 1x blade holder and 2x N80 blades. -
DOUBLE DOOR PANIC BOLTRead morePanic Hardware
This panic hardware range of emergency exit devices contains products that are certified to the European CEN standards BS EN179 & BS EN1125 and offers a design to give optimum safety and security. All products meet with the required standards in today’s market. They have an anti-thrust mechanism to protect against attack, they carry a ten year manufacturer’s guarantee and are two hour fire rated. Standard sized units are suitable for doors up to 2440mm high and 1220mm wide. Special sized vertical shoots, horizontal bars, keeps and pullman catch kits are available on request. Silver finish.
-
DOUBLE EDGE FINDER 0.500″ BODYRead moreEdge & Centre Finders – Double Edge
Cylinder Type
For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines. -
DOUBLE ENDED SCREWDRIVER 3040Read moreKennedy Reversible Blade Screwdriver
145mm long reversible hexagon blade with 6mm flat point and No.2 crosspoint ends. Cabinet handle style.
Overall length: 155mm. -
DOUBLE EURO PROFILE CYLINDER 70mm PBRead moreDouble Euro Profile Cylinder
70mm (35/35). Available in polished brass or satin chrome plate finishes.
-
DOUBLE EURO PROFILE CYLINDER 70mm SCPRead moreDouble Euro Profile Cylinder
70mm (35/35). Available in polished brass or satin chrome plate finishes.