Showing 49–64 of 102 results

• 

  KNUX 160405-R11 INSERT GRADE QX520

  Rp202.000

  Indexable Turning Inserts – KNUX

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.

  Chip Breaker: R11. Application: Rough.

  Read more
• 

  KNUX 160405-R11 INSERT GRADE QX530

  Rp202.000

  Indexable Turning Inserts – KNUX

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.

  Chip Breaker: R11. Application: Rough.

  Read more
• 

  SCGT 09T308-AL INSERT GRADE K10

  Rp194.000

  Indexable Turning Inserts – SCGT

  Grades:
  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  SCMT 09T304-PM INSERT GRADE QX520

  Rp223.000

  Indexable Turning Inserts – SCMT

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PM. Application: Medium.

  Read more
• 

  SNMG 120404-NM7 INSERT GRADE QX520

  Indexable Turning Inserts – SNMG

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR8. Application: Rough.
  Chip Breaker: NR9. Application: Rough.

  Read more
• 

  SNMG 120408-NM6 INSERT GRADE QX5030

  Rp207.000

  Indexable Turning Inserts – SNMG

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR8. Application: Rough.
  Chip Breaker: NR9. Application: Rough.

  Add to cart
• 

  SNMG 120408-NM7 INSERT GRADE QX520

  Indexable Turning Inserts – SNMG

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR8. Application: Rough.
  Chip Breaker: NR9. Application: Rough.

  Read more
• 

  SNMG 120408-NR8 INSERT GRADE QX520

  Indexable Turning Inserts – SNMG

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR8. Application: Rough.
  Chip Breaker: NR9. Application: Rough.

  Read more
• 

  SPMR 120304-PG INSERT GRADE QX520

  Rp226.000

  Indexable Turning Inserts – SPMR

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PG. Application: Medium.

  Read more
• 

  SPMR 120308-PG INSERT GRADE QX5020

  Rp226.000

  Indexable Turning Inserts – SPMR

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PG. Application: Medium.

  Read more
• 

  SPMR 120308-PG INSERT GRADE QX5030

  Rp226.000

  Indexable Turning Inserts – SPMR

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PG. Application: Medium.

  Read more
• 

  TCGT 110202-AL INSERT GRADE K10

  Rp238.000

  Indexable Turning Inserts – TCGT

  Grades:
  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Medium.

  Read more
• 

  TCGT 110204-AL INSERT GRADE K10

  Rp238.000

  Indexable Turning Inserts – TCGT

  Grades:
  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Medium.

  Read more
• 

  TCGT 16T304-AL INSERT GRADE K10

  Rp333.000

  Indexable Turning Inserts – TCGT

  Grades:
  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Medium.

  Read more
• 

  TCGT 16T304-PF INSERT GRADE QX5020

  Indexable Turning Inserts – TCGT

  Grades:
  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Medium.

  Read more
• 

  TCGT 16T308-AL INSERT GRADE K10

  Rp263.000

  Indexable Turning Inserts – TCGT

  Grades:
  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Medium.

  Read more