Showing 33–48 of 102 results

• 

  DCGT 11T304-AL INSERT GRADE K10

  Rp292.000

  Indexable Turning Inserts – DCGT

  Grades:
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  DCGT 11T304-PF INSERT GRADE QX530

  Rp342.000

  Indexable Turning Inserts – DCGT

  Grades:
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  DCGT 11T308-AL INSERT GRADE K10

  Rp292.000

  Indexable Turning Inserts – DCGT

  Grades:
  QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

  Chip Breaker: PF. Application: Finish.
  Chip Breaker: AL. Application: Med Cut (Alum).

  Read more
• 

  DCMT 070204-PM INSERT GRADE QX520

  Rp196.000

  Indexable Turning Inserts – DCMT

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  DCMT 11T304-PM INSERT GRADE QX5030

  Rp215.000

  Indexable Turning Inserts – DCMT

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  DCMT 11T304-PM INSERT GRADE QX520

  Rp215.000

  Indexable Turning Inserts – DCMT

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  DCMT 11T308-PM INSERT GRADE QX5020

  Rp252.000

  Indexable Turning Inserts – DCMT

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  DCMT 11T308-PM INSERT GRADE QX5030

  Rp252.000

  Indexable Turning Inserts – DCMT

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX5030 (ISO P20-P40 M20-M30) CVD Coated. – Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

  Chip Breaker: PM. Application: Med Cut.

  Read more
• 

  DNMG 110404-NM4 INSERT GRADE QX5020

  Rp189.000

  Yamaloy Indexable Turning Inserts – DNMG

  Grades:
  QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NSS. Application: Light/Med Cut.
  Chip Breaker: NM4. Application: Med Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR8. Application: Rough.

  Read more
• 

  DNMG 110408-NM4 INSERT GRADE QX5020

  Rp189.000

  Yamaloy Indexable Turning Inserts – DNMG

  Grades:
  QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NSS. Application: Light/Med Cut.
  Chip Breaker: NM4. Application: Med Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR8. Application: Rough.

  Read more
• 

  DNMG 150404-NM5 INSERT GRADE QX520

  Yamaloy Indexable Turning Inserts – DNMG

  Grades:
  QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NSS. Application: Light/Med Cut.
  Chip Breaker: NM4. Application: Med Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR8. Application: Rough.

  Read more
• 

  DNMG 150408-NM5 INSERT GRADE QX520

  Yamaloy Indexable Turning Inserts – DNMG

  Grades:
  QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NSS. Application: Light/Med Cut.
  Chip Breaker: NM4. Application: Med Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR8. Application: Rough.

  Read more
• 

  DNMG 150604-NM5 INSERT GRADE QX520

  Yamaloy Indexable Turning Inserts – DNMG

  Grades:
  QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NSS. Application: Light/Med Cut.
  Chip Breaker: NM4. Application: Med Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR8. Application: Rough.

  Read more
• 

  DNMG 150604-NM6 INSERT GRADE QX530

  Rp284.000

  Yamaloy Indexable Turning Inserts – DNMG

  Grades:
  QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NSS. Application: Light/Med Cut.
  Chip Breaker: NM4. Application: Med Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR8. Application: Rough.

  Read more
• 

  DNMG 150608-NM6 INSERT GRADE QX5030

  Rp284.000

  Yamaloy Indexable Turning Inserts – DNMG

  Grades:
  QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
  QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
  QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
  QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

  Chip Breaker: NF3. Application: Finish.
  Chip Breaker: NSA. Application: Light Cut.
  Chip Breaker: NSS. Application: Light/Med Cut.
  Chip Breaker: NM4. Application: Med Cut.
  Chip Breaker: NM5. Application: Med Cut.
  Chip Breaker: NM6. Application: Med Cut.
  Chip Breaker: ST. Application: Med Cut.
  Chip Breaker: NM7. Application: Med/Rough.
  Chip Breaker: NR8. Application: Rough.

  Read more
• 

  KNUX 160405-L11 INSERT GRADE QX5030

  Rp401.000

  Indexable Turning Inserts – KNUX

  Grades:
  QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
  QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.

  Chip Breaker: R11. Application: Rough.

  Read more