Archives: Products
Showing 20577–20592 of 23773 results
-
No.1 16x16mm R/H HSS BUTT WELDED LATHE TOOLRp903.000Read moreButt-Welded Lathe Tools – No.1RH
Light Turning & Facing – Right Hand
Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.Shape No.1RH – Rake & Clearance Angles
Top Rake: 14°. Front Clearance: 6°. Approach Angle: -2°. Trail Angle: 15°. Side Clearance: 6°. Corner Radius: -. -
No.1 3mm INTERCHANGEABLESTAMPRead moreKennedy Individual Nickel-Plated Carbon Steel Founts
Precision manufactured carbon steel stamps with nickel-plated finish. For producing clean impressions in one impact. 3mm character height.
-
No.1 3x19mm AL/OX STRAIGHT CARTRIDGE ROLL P120Read moreYork Cartridge Rolls – Straight Type
Spirally wound aluminium oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used top secure the abrasive to the tool.
Maximum Running Speeds:
Up to 12mm dia. 22,000rpm.
Up to 19mm dia. 18,000rpm.
Up to 25mm dia. 10,000rpm. -
No.1 3x19mm AL/OX STRAIGHT CARTRIDGE ROLL P80Read moreYork Cartridge Rolls – Straight Type
Spirally wound aluminium oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used top secure the abrasive to the tool.
Maximum Running Speeds:
Up to 12mm dia. 22,000rpm.
Up to 19mm dia. 18,000rpm.
Up to 25mm dia. 10,000rpm. -
No.1 9.5x25mm AL/OX TAPER CARTRIDGE ROLL P120Read moreYork Cartridge Rolls – Taper Type
Taper Type – Tapered for angles, corners and irregular or concave surfaces.
Spirally wound aluminium oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used top secure the abrasive to the tool.Maximum Running Speeds:
Up to 12mm dia. 22,000rpm.
Up to 19mm dia. 18,000rpm.
Up to 25mm dia. 10,000rpm. -
No.1 9.5x25mm AL/OX TAPER CARTRIDGE ROLL P60Read moreYork Cartridge Rolls – Taper Type
Taper Type – Tapered for angles, corners and irregular or concave surfaces.
Spirally wound aluminium oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used top secure the abrasive to the tool.Maximum Running Speeds:
Up to 12mm dia. 22,000rpm.
Up to 19mm dia. 18,000rpm.
Up to 25mm dia. 10,000rpm. -
No.1 9.5x38mm AL/OX TAPER CARTRIDGE ROLL P80Read moreYork Cartridge Rolls – Taper Type
Taper Type – Tapered for angles, corners and irregular or concave surfaces.
Spirally wound aluminium oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used top secure the abrasive to the tool.Maximum Running Speeds:
Up to 12mm dia. 22,000rpm.
Up to 19mm dia. 18,000rpm.
Up to 25mm dia. 10,000rpm. -
No.1 ARTIST BRUSHRead moreArtist’s Pencil Brushes – Plastic Handled – Medium Point
Plastic Handled – Medium Point
With pure bristles. Each brush is marked with its size. Medium point. -
No.1 BAx13/16″ O/D HSS DIERead moreBAâ(British Association) HSS Ground Thread Dies
BS 1127
For use in diestocks to produce external screw threads. -
No.1 BI-MATERIAL FILE HANDLERead moreFile Handles
Polypropylene file handles with integral hanging hole and covered with a ribbed rubber grip for increased
purchase and added comfort.
Available in three sizes:
O, 1 and 2. -
No.1 C/PT TITANIUM SCREWDRIVER BIT 1/4″ HEX STDRead moreTitanium Screwdriver Bits: 1/4″ Hex Bits – Crosspoint
Crosspoint
Titanium bits improve wear resistance, protect gripping points from the rigors of repetitive use. For use with hand and power tools. -
No.1 CARBIDE CENTRE DRILLRp520.000Read moreKennedy Carbide Centre Drills
Inch Series
Used to produce 60 centres in components for subsequent manufacturing operations to be carried out. Tool life is extended and difficult materials may be drilled. Manufactured to BS328. 60° inclusive angle. 118° drill point.Tolerances:
Cutting diameter 0.0005″.
Shank diameter 0.0010″. -
No.1 CROSS PT CABINET HANDLE SCREWDRIVERRead moreKennedy Cabinet Screwdrivers – Crosspoint
Traditional design cabinet screwdrivers with matt grey high impact plastic handles to ensure a firm yet comfortable grip allowing constant use, giving maximum torque. Chrome alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.
Crosspoint
Crosspoint screws virtually eliminate the screwdriver slippage if the correct size is used. The No.2 screwdriver would be suitable for most applications. -
No.1 CROSS PT ENGINEERS SCREWDRIVERRead moreKennedy Engineersâ & Electriciansâ Screwdrivers: Crosspoint
With a traditional âflutedâ design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.
Crosspoint
Crosspoint screws virtually eliminate the screwdriver slippage if the correct size is used. The No.2 driver is suitable for most applications. -
No.1 CROSS PT HI-GRIP SCREWDRIVERRead moreKennedy âHi-Gripâ Screwdrivers – Crosspoint
Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.
Crosspoint
Crosspoint screws virtually eliminate the screwdriver slippage if the correct size is used. The No.2 driver is suitable for most applications. -
No.1 CROSS PT INSULATED VDE SCREWDRIVERRead moreElectrician’s VDE Square Section Handle Screwdrivers – Crosspoint
Volt-tested’ to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC. Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.
Crosspoint
Crosspoint screws virtually eliminate the screwdriver slippage if the correct size is used. The No.2 driver is suitable for most applications.