Relaunch Promotion
Product Showcase
5″ FIRM TYPE CALIPER WITH SPUR
Kennedy Firm Joint Calipers
Adjustable Point & Spur
Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to provide a firm friction joint. This firm joint caliper has an adjustable ground point which can be retracted for storage and
the other leg is angled at the tip. The legs can be reversed, so the tip turns inwards or
outwards. Firm joint calipers are used for scribing arcs and parallel lines by using the edge of the workpiece as a guide, and are also used for measuring from the centre point of a component.
Out of stock
SKU : KEN5180550K
Kennedy Firm Joint Calipers
Adjustable Point & Spur
Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to provide a firm friction joint. This firm joint caliper has an adjustable ground point which can be retracted for storage and
the other leg is angled at the tip. The legs can be reversed, so the tip turns inwards or
outwards. Firm joint calipers are used for scribing arcs and parallel lines by using the edge of the workpiece as a guide, and are also used for measuring from the centre point of a component.
Specification :
Brand : Kennedy Industrial
eCl@ss Code : 21170108
Overall Depth : 15
Overall Length : 220
Overall Weight : 0.052
Overall Width : 80
Size (mm) : 130 (5″)
UNSPSC Code : 41111621
Weight each : 55g
| Weight | 1 kg |
|---|
Related products
-
AUTO RANGE DIGI. CLAMP METER TRUE RMS 1000A AC/DCRead moreEdison Auto Range 1000A AC/DC Digital Clamp Meters – DCM070 True RMS
Edison⢠multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters.
DCM070 True RMS
Ideal for electrical troubleshooting & testing in commercial environments. The AC/DC digital multimeter is capable of testing for the following: telephone networks, fuse connections.
AC voltage: 750V.
DC voltage: 1000V.
AC/DC current: 1000A.
Resistance: 60MW.
Frequency: 100kHz.
Frequency from clamp: 400Hz.
Diode testing facility, continuity buzzer, clear display with LED backlight & data hold function, auto power âOFFâ & low power indicator, auto range facility, 4 segments bar graph.
Digital display count: 3999.
Conforms to IEC 1010, CAT II 1000V and CAT III 600V.
Pack includes: digital clamp multimeter, test probes, 3x DC1.5V AAA batteries (installed), instruction manual, protective case with carry handle.
Dimensions (W x D x H): 140 x 58 x 260mm.
Weight: 606g. -
AUTO RANGE MULTIMETER – USB INTERFACERead moreEdison Auto Range Digital Multimeters – DAM060
Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters. Ideal for electrical troubleshooting and straightforward environmental testing in residential and commercial environments.
DAM060
Auto Range Digital Multimeter with USB interface, ideal for electrical troubleshooting and straightforward maintenance, initial start-up testing and R and D.
Temperature testing (K Type): -5°C to 1000°C.
AC voltage: 700V.
DC voltage: 1000V.
AC/DC current: 10A.
Resistance: 60MW.
Capacitance: 300mF.
Frequency/duty cycle: 1Hz to 1MHz.
Diode testing and buzzer.
Relative measurement function. Clear display with LED back light and data hold function. Auto power âOFFâ and low power indicator. Auto/manual range. Electronic protection system.
Digital display count: 6000.
Pack includes: digital multimeter, test probes, temperature sensor, clamp-on test lead, USB Interface, CD rom âPC-LINKâ software (compatible with Windows 2000, NT or XP), 9V battery (installed), instruction manual.
PC-LINK software features: measure graph, measure data record, simulate LCD display, analogue dial plate display, measure max/min display, sampling interval, graph export, measure data save.
Dimensions (W x D x H): 165 x 65 x 230mm. -
REPLACEMENT PROBE FOR EDI5162700K/3000KRead moreReplacement Probe
Replacement Probe for Edison DM664 and DAM668 Digital Multimeters. (EDI-516-3000K) and (EDI-516-2700K).
-
DAM668 DIGITAL MULTIMETERAdd to cartDigital Multimeter – DAM668
DAM668
Removable rubber holster with integral lead holders. Features include continuity, diode, transistor hFE, auto ranging, reading/peak hold, bar graph, fused current range, overload indication, low battery indicator, tilt stand/hanger.
Voltage max: 700V AC, 1000V DC.
Current max: 10A AC/DC.
Resistance max: 32.6MW.
Capacitance max: 32.6mF.
Frequency max: 150kHz.
Safety rating: Cat III 600V, Cat II 1000V.
Warranty: 1 year.