Archives: Products
Showing 15841–15856 of 23773 results
-
ANTI-MIST SAFETY GOGGLESRead moreTuffsafe XL21 Interceptor Safety Goggles
The Tuffsafe XL21 interceptor safety goggles have clear single piece polycarbonate lens with an anti-mist coating it is mounted in a PVC housing with easy flow indirect ventilation and adjustable elasticated strap.
For the full range of workwear and protective clothing please refer to our catalogue.
-
ANTI-RUST PAPER TYPE FP 900mmx200MRead moreAnti-Rust Paper Rolls
Corrosion inhibiting papers are a clean and convenient way of wrapping metal products to prevent the onset of corrosion. These papers are performance tested and approved to the German TL 8135-0002 standard.
VCI Paper: Volatile Corrosion Inhibitor (VCI) paper, VCI chemicals volatize, attach themselves to metal and form a protective layer just a few molecules thick. This layer prevents humidity, salt, dirt from depositing on the metal and causing corrosion.
For use with ferrous metals only.MPI Paper: Superior multi- purpose corrosion inhibitor paper for use as a wrapper for all metals, e.g. ground rollers, or as an interleave for packing light components.
Size: 900mm x 200m.
-
APKT 1604PDR-AL INSERT GRADE K10Rp304.000Read moreYamaloy Indexable Milling Inserts – APKT(APXT)
Insert Grade
K20 – Micrograin uncoated. For cast iron, aluminium alloy, other non-ferrous materials including titanium and nickel alloy.
QK25C (K15 – K30) – Coated. For milling cast irons.
QP30P (P10 – P35) – PVD Coated. Milling grade for steel and some stainless steels.
QP30T (P10 – P35) – PVD Coated. Milling grade for steel and some stainless steels. -
APOLLO PURPLE SPECS AMBER LENSRead moreSiteSafe Safety Spectacles
One piece amber tinted polycarbonate lens with anti-mist treatment and ultra lightweight design (26g). Built-in side protection with soft silicone nose bridge and adjustable temple length. Low energy impact protection with total UV protection. Hang cord attachment points. Class 1.
-
APXT(APKT) 1003PDR-EM INSERT GRADE QK25CRead moreYamaloy Indexable Milling Insert APXT
Insert Grade Description
(K20) Micrograin uncoated. For cast irons, aluminium alloys, other non-ferrous
materials including titaniums and nickel alloys.
(K15-K30) Coated. For milling cast irons.
(P10-P35) PVD coated. Milling grade for steels and some stainless steels. -
APXT(APKT) 1003PDR-EM INSERT GRADE QP30PRp217.000Read moreYamaloy Indexable Milling Insert APXT
Insert Grade Description
(K20) Micrograin uncoated. For cast irons, aluminium alloys, other non-ferrous
materials including titaniums and nickel alloys.
(K15-K30) Coated. For milling cast irons.
(P10-P35) PVD coated. Milling grade for steels and some stainless steels. -
APXT(APKT) 1604PDTR INSERT GRADE K20Rp212.000Read moreYamaloy Indexable Milling Insert APXT
Insert Grade Description
(K20) Micrograin uncoated. For cast irons, aluminium alloys, other non-ferrous
materials including titaniums and nickel alloys.
(K15-K30) Coated. For milling cast irons.
(P10-P35) PVD coated. Milling grade for steels and some stainless steels. -
APXT(APKT) 1604PDTR INSERT GRADE QK25CRp327.000Read moreYamaloy Indexable Milling Insert APXT
Insert Grade Description
(K20) Micrograin uncoated. For cast irons, aluminium alloys, other non-ferrous
materials including titaniums and nickel alloys.
(K15-K30) Coated. For milling cast irons.
(P10-P35) PVD coated. Milling grade for steels and some stainless steels. -
APXT(APKT) 1604PDTR INSERT GRADE QP30PRp252.000Add to cartYamaloy Indexable Milling Insert APXT
Insert Grade Description
(K20) Micrograin uncoated. For cast irons, aluminium alloys, other non-ferrous
materials including titaniums and nickel alloys.
(K15-K30) Coated. For milling cast irons.
(P10-P35) PVD coated. Milling grade for steels and some stainless steels. -
AQUEOUS ORANGE CITRUS BASED CLEANER 20LTRRead moreSOLENT Aqueous-Orange Citrus Based Aqueous Cleaner
Aqueous-Orange is a highly concentrated citrus based blend of solvents and powerful surfactants which will safely remove oils, greases etc from many hard surfaces. Designed to replace hazardous solvents such as White Spirit and Paraffin. It can be diluted with water for maximum economy and its microemulsion formula offers the benefits of both water based economy with solvent based efficiency.
Contains biodegradable surfactants which enable it to break down naturally after disposal.
Non-chlorinated, Non-aromatic, Non-toxic, Contains no CFC
Negligible VOC (Volatile Organic Compound) emissions
Increased OEL’s (Occupational Exposure Limits)
Reduces the need for control measures to satisfy COSHH requirements.
Non flammable.
Non-hazardous for easy waste disposal.
Can be used as a safer, environmentally friendly alternative to hazardous solvents such as such as White Spirit and Paraffin. -
AQUEOUS ORANGE CITRUS BASED CLEANER 5LTRRead moreSOLENT Aqueous-Orange Citrus Based Aqueous Cleaner
Aqueous-Orange is a highly concentrated citrus based blend of solvents and powerful surfactants which will safely remove oils, greases etc from many hard surfaces. Designed to replace hazardous solvents such as White Spirit and Paraffin. It can be diluted with water for maximum economy and its microemulsion formula offers the benefits of both water based economy with solvent based efficiency.
Contains biodegradable surfactants which enable it to break down naturally after disposal.
Non-chlorinated, Non-aromatic, Non-toxic, Contains no CFC
Negligible VOC (Volatile Organic Compound) emissions
Increased OEL’s (Occupational Exposure Limits)
Reduces the need for control measures to satisfy COSHH requirements.
Non flammable.
Non-hazardous for easy waste disposal.
Can be used as a safer, environmentally friendly alternative to hazardous solvents such as such as White Spirit and Paraffin. -
AR15 1.5mm DIA DIAMOND COATED BURRRead moreYork Diamond Coated Burrs – Cylindrical Ball Nosed
3mm shank. Overall length 45mm. Diamond grip mesh is 120/140. Recommended operating speeds 15,000 30,000 RPM. Suitable for precision grinding of carbide, gems, ceramics, tough alloys, cermets, tool steels etc.
-
AR20 2mm DIA DIAMOND COATED BURRRead moreYork Diamond Coated Burrs – Cylindrical Ball Nosed
3mm shank. Overall length 45mm. Diamond grip mesh is 120/140. Recommended operating speeds 15,000 30,000 RPM. Suitable for precision grinding of carbide, gems, ceramics, tough alloys, cermets, tool steels etc.
-
AR25 2.5mm DIA DIAMOND COATED BURRRead moreYork Diamond Coated Burrs – Cylindrical Ball Nosed
3mm shank. Overall length 45mm. Diamond grip mesh is 120/140. Recommended operating speeds 15,000 30,000 RPM. Suitable for precision grinding of carbide, gems, ceramics, tough alloys, cermets, tool steels etc.
-
AR30 3mm DIA DIAMOND COATED BURRRead moreYork Diamond Coated Burrs – Cylindrical Ball Nosed
3mm shank. Overall length 45mm. Diamond grip mesh is 120/140. Recommended operating speeds 15,000 30,000 RPM. Suitable for precision grinding of carbide, gems, ceramics, tough alloys, cermets, tool steels etc.
-
AR40 4mm DIA DIAMOND COATED BURRRead moreYork Diamond Coated Burrs – Cylindrical Ball Nosed
3mm shank. Overall length 45mm. Diamond grip mesh is 120/140. Recommended operating speeds 15,000 30,000 RPM. Suitable for precision grinding of carbide, gems, ceramics, tough alloys, cermets, tool steels etc.
