Archives: Products
Showing 12593–12608 of 23773 results
-
6.0-5.0 ER20 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
6.0-5.0 ER25 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
6.0-5.0 ER32 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
6.0-5.0 ER40 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
6.0-8.0mm RATCHETING CHUCK TYPE TAP WRENCHRp442.000Add to cartKennedy Ratchet Type Tap Wrenches
Manufactured from hardened and tempered steel, with chrome plated high polish finish.
Switchable between forward and reverse coupled with the multi-positional sliding T-bar makes this tap wrench ideal for use in confined spaces. Individually boxed. -
6.00 X 130 GOLD-ZP FIBRE BOARD SCREWS (BOX-100)Read moreMatlock Pozidriv® Woodscrews: Gold-ZP⢠Fibre Board
Gold-ZP⢠Fibre Board Woodscrews
For power driving into hard and soft wood, MDF and chipboard. Manufactured to reduce wood split. Heat-treated for high resistance to breakage. With an aggressive clean cutting single thread drives easily – even in MDF and chipboard. Passivated zinc-plated and lubricated to aid penetration. 25° point angle usually needs no pilot. -
6.00mm 120DEG HSS-COBALT S/S SPOTTING DRILLRp58.000Read moreSherwood HSS-E Spotting Drills – 120° Point
120° Point – Series C530
Special drill for accurate and fast spotting on NC machines, jig drills and other capital-intensive boring machines. For countersinking and chamfering of tapping holes in one operation. Only suitable for shallow depth drilling. -
6.00mm 90DEG HSS-COBALT S/S COUNTERSINK DIN335Rp138.000Read moreHSS-Co 5% 90° Countersinks
For all ferrous and non-ferrous metals as well as for hard plastics. General purpose chamfering/deburring and countersinking tool. bright finish, 3 flute, ground all over.
Made to DIN 335. -
6.00mm 90DEG HSS-COBALT S/S SPOTTING DRILLRp62.000Read moreSherwood HSS-E Spotting Drills – 90° Point
90° Point – Series C520
Special drill for accurate and fast spotting on NC machines, jig drills and other capital-intensive boring machines. For countersinking and chamfering of tapping holes in one operation. Only suitable for shallow depth drilling. -
6.00mm BLUE FORK TERMINAL (PK-100)Read moreKennedy Standard Industrial Terminals: Fork Connector Terminals
Fork Connector Terminals
Pack quantity: 100.
Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve. -
6.00mm BLUE RING TERMINAL (PK-100)Read moreKennedy Standard Industrial Terminals: Fork Connector Terminals
Fork Connector Terminals
Pack quantity: 100.
Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve. -
6.00mm CARBIDE S/S JOBBER DRILLRp387.000Read moreSolid Carbide Jobber Drills
General purpose drills for drilling a wide variety of metallic and non-metallic materials.
Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters – 1 pce.
Manufacturing Standard: BS 328, DIN 338. -
6.00mm CARBIDE S/S STUB DRILLRp301.000Read moreSolid Carbide Stub Drills – Metric
Metric
For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
Manufactured to Works Standard. -
6.00mm DIA COBALT DRILL FOR STAINLESS STEELRp63.000Add to cartHSS-Co Straight Shank Drills
Metric
Heavy duty drill made of 8% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm2, very hard bronze, stainless steels as well as heat and acid resistant steels. Point angle: 135°. Helix angle: normal. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Supply unit. All diameters – 1 pce. Manufacturing Standard: BS 328, DIN 338B. -
6.00mm DIA HSS S/S R-F JOBBER DRILLRp168.000Read moreSenator HSS Roll Forged Jobber Drills – Metric
Metric
Senator jobber drills are roll forged from HSS, ensuring uninterrupted grain structure. This provides exceptional strength and durability. Tips are ground for effective cutting. Suitable for drilling wood, plastic, carbon and plain steels where the cutting efficiency of ground flute is not required. Manufactured to BS 328 : Part 1 : 1986 & DIN 338 Type N. -
6.00mm ER11 SINGLE ANGLECOLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499.