Archives: Products
Showing 12017–12032 of 23773 results
-
500x120mm T-HANDLE MULTI-HOLD H/D CLAMPRead moreKennedy Heavy-Duty T-Handle Multi-Hold Clamps
Manufactured from heat treated carbon steel for extra strength. Finished with nickel and chrome plating. Textured T-spindle for extra clamping force. Supplied with three replaceable clamping pads for versatility.
-
50gm WEED BLOCK FABRIC 1.5Mx100MRead moreWeed Control Matting
An organic method of suppressing weeds in your garden or allotment and under decking or patios. The fabric lets water drain through whilst stopping the light that’s essential to plant growth.
Standard Duty: spun bound polypropylene. 50gsm fabric. -
50gm WEED BLOCK FABRIC 1Mx20MRead moreWeed Control Matting
An organic method of suppressing weeds in your garden or allotment and under decking or patios. The fabric lets water drain through whilst stopping the light that’s essential to plant growth.
Standard Duty: spun bound polypropylene. 50gsm fabric. -
50KG MAG LEVER TYPE BASERead moreKennedy Lever Type Base – 50kg
Fitted as standard to KEN- 333-2030K, – 2050K and – 2110K two magnetic faces, bottom and back face. Large vee for curved surfaces.
Threaded: M8 x 1.25mm.
Base dimensions: 60 x 50 x 55mm.
Magnetic pull: 50kg. -
50LTR PARTS WASHER FLOORSTANDINGRead moreKennedy Parts Washer – Floor Standing
Used in garage, workshop and industrial applications for degreasing components for inspection and prior to assembly. Recirculated cleaning fluid is filtered before entering the pump and being directed over the workpiece. Flexible chrome finish metal delivery hose. Heavy-duty non-welded one-piece tank. Fully enclosed electric nylon pump. Self-latching fusible linked lid closes in the event of a fire. Triple baked enamel finish. Accepts all common degreasing agents. Shelf keeps parts out of solvent during inspection and drying. Immersion soaking when the parts shelf is removed. Fitted with a 3 pin moulded plug and a 1.6m power cable. Minimum agent capacity 40ltr. Maximum agent capacity 50ltr. Fitted with a drain plug for easy maintenance. Removable parts basket. Built-in replaceable filter. Spare filter included.
Overall size (L x W x H): 800 x 550 x 890mm.
Tank size (L x W x H): 725 x 490 x 270mm.
Height of working area: 750mm.
Power rating: 25W.
Voltage: 240V.
Rated input: 0.3A. -
50M REINFORCED GARDEN HOSE COIL 1/2″ BORERead moreGarden Hoses
Multi-purpose three layer braided garden hose. Five year guarantee. Bore size 13mm.
-
50mm (SET OF 10) STEEL STENCIL FIGURESRead moreKennedy Stencil Sets – Numbers
10-Piece Numbered Sets 0 – 9
Stencils manufactured from hard-wearing quality steel with precision cut letters for a clean sharp image. Suitable for use with all paints and marking compounds for marking packing cases with shipping details, loading/work bay walls for identification, car park spaces and countless other applications. -
50mm (SET OF 26) STEEL STENCIL LETTERSRead moreKennedy Stencil Sets – Letters
26-Piece Letter Sets A – Z
Stencils manufactured from hard-wearing quality steel with precision cut letters for a clean sharp image. Suitable for use with all paints and marking compounds for marking packing cases with shipping details, loading/work bay walls for identification, car park spaces and countless other applications. -
50mm 90DEG HSS-COBALT 3FL T/S COUNTERSINKRp3.183.000Read moreSherwood HSS-Co 5% 3 Flute Countersink – Taper Shank
Suitable for deburring and chamfering most metals and plastics. Manufactured to BS328:Part 5:1983. 90° inclusive angle.
-
50mm AL/OX QUICK CHANGE DISCS GRIT 100Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
50mm AL/OX QUICK CHANGE DISCS GRIT 120Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
50mm AL/OX QUICK CHANGE DISCS GRIT 180Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
50mm AL/OX QUICK CHANGE DISCS GRIT 36Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
50mm AL/OX QUICK CHANGE DISCS GRIT 40Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
50mm AL/OX QUICK CHANGE DISCS GRIT 50Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
50mm AL/OX QUICK CHANGE DISCS GRIT 60Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.