Archives: Products
Showing 11009–11024 of 23773 results
-
5-DRAWER ROLLER CABINET – REDRead moreYamoto Roller Tool Cabinets
Double wall side panels and welded joints for added rigidity. Solid one piece I-beam drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 100mm rubber castors, two brakes. Overall dimensions: 850 x 690 x 460mm. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded, and should only ever be pushed.
3 Drawer
Bottom compartment (W x D x H): 610 x 430 x 355mm.
Drawer sizes (W x D x H): 3@ 590 x 410 x 100mm. Uses 16â drawer slides.5 Drawer
Internal drawer dimensions (W x D x H): 4@ 590 x 410 x 100mm.
1@ 590 x 410 x 200mm. Uses 16â drawer slides.7 Drawer
Internal drawer dimensions (W x D x H): 4@ 590 x 410 x 50mm. 2@ 590 x 410 x 100mm. 1@ 590 x 410 x 200mm. Uses 16â drawer slides. -
5-DRAWER TOOL CABINETRead more
Senator Roller Cabinets – 5 Drawer
5 Drawer
Double thickness side walls with welded joints and a hard wearing epoxy powder coating. I-Beam draw slides with double sliders on base drawer. 100mm rubber castors with brakes fitted to two end castors. Fully locking. Castors are rated to 40kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded and should only ever be pushed.
Overall dimensions (W x D x H): 680 x 435 x 660mm.
Drawer sizes (W x D x H): 3@ 511 x 403 x 75mm. 2@ 551 x 403 x 155mm.
Uses 16″ drawer slides. -
5-IN-1 MULTIMETER & ENVIRONMENTAL TESTERRead moreEdison Auto Range Digital Multimeters – MET060
Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters. Ideal for electrical troubleshooting and straightforward environmental testing in residential and commercial environments.
MET060
The 5 in 1 digital multimeter is capable of testing the following: electrical testing.
Temperature: -20 to 1000°C.
Humidity: 30 to 90%.
Sound level: 35 to 100db.
Illumination: 4000 to 40000Lux.
AC/DC voltage: 600V.
AC/DC current: 10A.
Resistance: 40MW.
Capacitance: 200mF.
Frequency: 1Hz to 200KHz.
Relative measurement function. Diode testing facility. Clear display with LED back light and data hold function.Auto power OFFâ and low power indicator.
Digital display count: 3999.
Pack includes: environment digital multimeter, test probes, clamp-on test leads, tempereture sensor probe, 9V battery (installed), instruction manual.
Dimensions (W x D x H): 165 x 65 x 230mm. -
5-IN-1 SECATEUR MULTI TOOLRead more5-in-1 Secateur Multi-Tool
The 5-in-1 Secateur is a versatile tool ideal for all levels of gardener. The main functions include – root remover, mini saw, secateurs, weeding tool and pruning knife. As well as the five main applications the tool comes equipped with a bi-material grip and stainless steel blades to help prevent rust. With the use of the blade lock, the secateurs can be folded safely into a compact size fitting the pocket pouch included.
Size (H x W x D): 150 x 80 x 18mm. -
5-PCE 0.9-2.5mm HEXAGON SCREWDRIVER SETRead moreKennedy Jewellersâ & Watchmakersâ Tool Sets, Alloy Steel Blades – 6 Pieces
A quality range of precision screwdrivers. Combination tool and driver sets have carbon steel blades (tweezers are stainless steel). Driver only sets have nickel chrome molybdenum alloy steel blades. All with attractive chromed handles.
5-Piece Hexagon Key Driver Set (-9886K)
Contents: Hexagon: 0.9, 1.3, 1.5, 2.0 and 2.5mm.5-Piece Hexagon Ball Key Driver Set (-9887K)
Contents: Hexagon Ball: 1.3, 1.5, 2.0, 2.5 and 3.0mm.5-Piece Nut Driver Set (-9888K)
Contents: Hexagon: 3.0, 3.5, 4.0, 4.5 and 5.0mm. -
5-PCE 1.3-3.0mm BALL HEXAGON SCREWDRIVER SETRead moreKennedy Jewellersâ & Watchmakersâ Tool Sets, Alloy Steel Blades – 6 Pieces
A quality range of precision screwdrivers. Combination tool and driver sets have carbon steel blades (tweezers are stainless steel). Driver only sets have nickel chrome molybdenum alloy steel blades. All with attractive chromed handles.
5-Piece Hexagon Key Driver Set (-9886K)
Contents: Hexagon: 0.9, 1.3, 1.5, 2.0 and 2.5mm.5-Piece Hexagon Ball Key Driver Set (-9887K)
Contents: Hexagon Ball: 1.3, 1.5, 2.0, 2.5 and 3.0mm.5-Piece Nut Driver Set (-9888K)
Contents: Hexagon: 3.0, 3.5, 4.0, 4.5 and 5.0mm. -
5-PCE 3.0-5.0mm PRECISION NUT DRIVER SETRead moreKennedy Jewellersâ & Watchmakersâ Tool Sets, Alloy Steel Blades – 6 Pieces
A quality range of precision screwdrivers. Combination tool and driver sets have carbon steel blades (tweezers are stainless steel). Driver only sets have nickel chrome molybdenum alloy steel blades. All with attractive chromed handles.
5-Piece Hexagon Key Driver Set (-9886K)
Contents: Hexagon: 0.9, 1.3, 1.5, 2.0 and 2.5mm.5-Piece Hexagon Ball Key Driver Set (-9887K)
Contents: Hexagon Ball: 1.3, 1.5, 2.0, 2.5 and 3.0mm.5-Piece Nut Driver Set (-9888K)
Contents: Hexagon: 3.0, 3.5, 4.0, 4.5 and 5.0mm. -
5-PCE 4.1/2″ STAINLESS STEEL MINIATURE PLIER SETRead moreSenator Miniature Plier Set
5 Piece Set
Used for precision work on a number of applications. Spring tensioned pliers suited for repetitive use. Fitted with slip-resistant PVC cushion grip handles and heat-treated stainless steel blades.
Hardness: Pliers 42 – 45HRC, Nippers 45 – 48HRC.
Set contents: diagonal nippers, flush cutting 90mm (31/2â); bent nose pliers, 45° 100mm (4â); pointed nose pliers, 100mm (4â); round nose pliers, 100mm (4â); flat nose pliers, 100mm (4â). -
5-PCE ASSORTED FLAP WHEEL SETRead moreYork Flap Wheel Sets – 5 Pieces
Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Recessed hub design for access in tight corners.
5 Piece Set Contents: 30 x 15mm: P80, 40 x 15mm: P80, 50 x 15mm: P60, 50 x 20mm: P80, 60 x 30mm: P60.
-
5-PCE FORSTNER BIT SET 15-35mmRead moreSenator Forstner Bit Sets
For precision hole boring. Self piloting point combined with trepanning style cutting action will produce overlapping holes in any direction. Ideal for scroll and scalloping applications. Suitable for use in bench and pillar drills to bore a wide range of timber, plastics and other materials.
Boxed Sets
Contents:
5 Piece: 1x each 15, 20, 25, 30 and 35mm.
15 Piece: 1x each 10, 12, 15, 16, 18, 20, 22, 25, 26, 28, 30, 35, 40, 45 and 50mm.Shank Diameter: 10mm
-
5-POCKET 1-LOOP LARGE TOOL & NAIL POUCHRead moreKennedy Combination Pouches
Leather, made with five pockets and one loop. Belt not included.
-
5-POCKET 1-LOOP SMALL TOOL & NAIL POUCHRead moreCombination Pouches
Manufactured from leather with a fully riveted double stitched construction. Chrome leather, five pockets and one loop. Belt not included.
-
5-POCKET 2-LOOP TOOL & NAIL POUCHRead moreCombination Pouches
Leather, made with five pockets, two loops, webbing belt and tape holder.
-
5-ROW PLASTIC HANDLE WIRE SCRATCH BRUSHRead moreWire Scratch Brushes
for cleaning all rough surfaces on a range of materials to remove paint, dirt, rust and stubborn deposits. Plastic handled with cast steel bristles for general purpose work.
*with scraper -
5-SHELF RACK 1010x400x1830mm 100KG PER SHELFRead moreMatlock Standard Duty Racking – 5 Shelves
5 Shelves
This racking system has uprights and beams made of medium gauge steel with a corrosion resistant powder coating and rubber feet to protect the floor. It is easy to assemble, interlocking with no nuts and bolts to worry about. The shelves are easily adjustable and can take up to 100kg UDL (uniformly distributed load) with the rack being fixed to a wall. -
5-SHELF RACK 1230x610x1830mm 18KG PER SHELFRead moreMatlock Heavy Duty Racking – 5 Shelves
5 Shelves
This racking system has two ways of assembly with uprights and beams made of heavy gauge steel with a corrosion resistant powder coating and rubber feet to protect the floor. It is easy to assemble, interlocking ‘keyhole’ slots, no nuts and bolts. The shelves are easily adjustable and can take up to 318kg UDL (uniformly distributed load) with the rack being fixed to a wall.
