Archives: Products
Showing 10961–10976 of 23773 results
-
4PC STUD PULLER SET 6-12mmRead moreKennedy Stud Puller Set, 1/2″
Chrome vanadium clamping rollers grip worn or rounded fixings by compressing onto the fixing as the socket is turned, applying pressure to grip, turn and remove. Unscrews left and right hand threads.
Set Contents: 6mm (1/4â), 8mm (5/16â), 10mm (3/8â), 12mm (7/16â). -
4PCE SCREW EXTRACTOR SETRp201.000Add to cartScrew Extractor Sets
4 Piece Sizes:
No. 2, 3, 4 and 5.6 Piece Sizes:
No. 1, 2, 3, 4,
5 and 6. -
4X HAND MAGNIFIER 75mm DIAMETERRp90.000Add to cartKennedy Hand Magnifiers
Plastic lightweight magnifiers. Used to provide a clear crisp enlarged image. Used for
inspection of finished parts, enlarging small text andâpictures etc. -
4X ZINC PLATED HOSE CLIPSRead moreZinc-Plated Hose Clips
Non-slip worm drive. Precision manufactured from the finest British steels to BS 5315. Passivated zinc finish to give double protection. For automotive, gas, plumbing and agricultural applications.
-
4×1.60mm CARBIDE CENTRE DRILLRead moreCarbide Centre Drills – Metric
Metric Series
Used to produce 60° centres in components for subsequent manufacturing operations to be carried out. Tool life is extended and difficult materials may be drilled.
60° included angle. 118° drill point. Manufactured to BS 328.Tolerances:
Cutting diameter +0.0005″
Shank diameter +0.0010″ -
4×1/4×5/8″ A30RBF DPC GRINDING DISCRead moreDepressed Centre Cutting & Grinding Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 27 Depressed Centre Grinding
Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for âfree handâ or wet grinding.Optimum angle for use 25 to 35°.
-
4×1/8×5/8″ A30RBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
4×1/8×5/8″ A30TBF CUTTING DISCRead moreType 42 Depressed Centre Cutting
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 42 Depressed Centre Cutting
Manufactured to assure operator safety and optimum performance. For use with all portable grinders/cut-off machines. Not to be used for âfree handâ cutting and importantly not to be used for grinding. -
4×1/8×5/8″ C24RBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
4x100mm FLAT PARALLEL INSULATED VDE SCREWDRIVERRead moreElectrician’s VDE Square Section Handle Screwdrivers – Parallel Tip
Volt-tested’ to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC. Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.
Parallel Tip
Slotted head screws are the most commonly used screw. The tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping. -
4x10mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
4x10mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
4×12.7mm CYL PLAIN END C/B BURR CUT 9Read moreYork Carbide Burrs – Cylindrical Plain End
All sizes are nominal.
Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 6 – Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
4x12mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
4x12mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
4x14mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015.