Archives: Products
Showing 9489–9504 of 23773 results
-
31mm CARBIDE TIPPED HOLESAWRead moreCarbide Tipped Holesaws
Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.
-
31mm LONG MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Long Series
Shank diameter: 19mm/3/4â.
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm. -
31mm SHORT MULTI-TOOTH CUTTERRead moreM2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.Short Series
Shank diameter: 19mm/3/4â.
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm. -
32 BLADE RADIUS GAUGE 17/64-1/2″Read moreKennedy Radius Gauges
Manufactured from hardened and polished steel, the blades are precision milled for optimum accuracy when measuring internal and external radii. Enclosed in a steel case.
Size range:
34 Blade Metric: 1.0 to 3.0 x .25 and 3.5 to 7.0 x .5
32 Blade Metric: 7.5 to 15.0 x .5
32 Blade Inch: 17/64â to 1/2â x 1/64â
30 Blade Metric: 15.5 to 20.0 x .5 and 21.0 to 25.0 x 1
30 Blade Inch: 1/32â to 1/4â x 1/64â. -
32 BLADE RADIUS GAUGE 7.5-15.0mmRead moreKennedy Radius Gauges
Manufactured from hardened and polished steel, the blades are precision milled for optimum accuracy when measuring internal and external radii. Enclosed in a steel case.
Size range:
34 Blade Metric: 1.0 to 3.0 x .25 and 3.5 to 7.0 x .5
32 Blade Metric: 7.5 to 15.0 x .5
32 Blade Inch: 17/64â to 1/2â x 1/64â
30 Blade Metric: 15.5 to 20.0 x .5 and 21.0 to 25.0 x 1
30 Blade Inch: 1/32â to 1/4â x 1/64â. -
32 x 18 x 300mm RECTANGULAR KEY STEELRead moreKennedy Industrial Key Steel – Rectangular: Metric
Rectangular â Metric
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request. -
32.00mm HSS 1/2″ PARALLEL SHANK DRILLRp821.000Read moreHSS Reduced Shank Drills (Blacksmiths)
1/2â parallel shank. General purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2â. Point angle: 118°, helix angle: normal, web thickness: standard, tolerance of diameter: h8, tolerance of shank: 0.01/0.08. Manufactured to works standard.
-
32.00mm HSS T/S DRILLRp1.597.000Read moreSherwood HSS Taper Shank Drills, 4 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
32.00mm HSS T/S SP/FL MACHINE REAMERRp4.267.000Read moreTaper Shank Machine Reamers
Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.
Tolerances (to H7)
Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.
Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014.
Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016. -
32.00mm x 505mm O/A HSS TAPER SHANK DRILLRead moreHSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 3 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite.
Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8.
Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1. -
32.0mm DIA BUTTON MAGNETRead moreKennedy Button Magnets
A horseshoe type cylindrical magnet. Opposing poles are at the same end of the magnet separated by a slot. Supplied with a plain bore and keeper. Permanently magnetic.
-
32.0mm HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches: Metric – Standard Length
Metric – Standard Length
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. -
32.0mm LONG ARM HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches, Long Arm – Metric
Metric – Long Arm
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. -
32.0x32mm CUTx1/2″SK.2FLSTR. PLUNGE BITRead moreRouter Cutters
Two Flute Straight Plunging Bits
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move. -
32.50mm HSS T/S DRILLRead more
Sherwood HSS Taper Shank Drills, 4 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
32.5mmx6mm HSS PLAIN SHANK WOODRUFF CUTTERRead moreSherwood HSS Plain Shank Woodruff Cutters
12mm/1/2â Shank Ã
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850.Metric Limits of Tolerances
Diameter: + 0.000 -0.127
Width 2 up to 4: – 0.014 -0.028
Width 4 up to 7: – 0.020 -0.038
Width 7mm up: – 0.025 -0.047