Archives: Products
Showing 9457–9472 of 23773 results
-
30×3.50mm HSS GT STR. FLUTE TAPER TAPRp1.345.000Add to cartMetric Coarse HSS Ground Thread Taps
Straight Flute Individual Sizes IS0 529
(1) Diameter and pitch not mentioned in ISO.
-
30×3.50mm HSS HEXAGON DIE NUTRp1.380.000Read moreMetric Coarse thread Restoring Die Nuts
HSS Ground ThreadBS 1127
For use with spanners to clean
and repair existing external
screw threads. -
30×3.50mmx3″ O/D HSS DIERp2.787.000Read moreMetric Coarse HSS Ground Thread Dies
BS 1127
For use in diestocks to produce external
screw threads. -
30x30mm AL/OX SANDING BANDS GRIT 150Read moreYork Sanding Bands
Spiral wound with tear-resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals.
* P60 = Coarse, P80 = Medium, P150 = Fine. -
30x30mm AL/OX SANDING BANDS GRIT 60Read moreYork Sanding Bands
Spiral wound with tear-resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals.
* P60 = Coarse, P80 = Medium, P150 = Fine. -
30x30mm AL/OX SANDING BANDS GRIT 80Read moreYork Sanding Bands
Spiral wound with tear-resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals.
* P60 = Coarse, P80 = Medium, P150 = Fine. -
30x30mm SPINDLE MOUNTED HOLDERRead moreYork Drum Holders
Suitable for use with chucks/collets on all portable power and air tools. For use with spiral bound abrasive sanding bands. Self expanding when in use for a secure grip on the band. All shanks are 6mm except where marked * which has an 8mm shank.
-
30x45x30mm POWER MAGNETRead moreKennedy Power Magnets
A square horseshoe magnet. Supplied with plain fixing holes.
Kg pull (max): 25mm – 4.5, 30mm – 9.0, 40mm – 11.8. -
30x5mm 30SWG SHAFT MOUNTED BRUSHRead moreWire Wheels
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Circular Brushes – Shaft Mounted
Suitable for use in power drills. Most suitable for hard to reach areas and grooves. 6mm Shanks. 30 SWG. -
31.00mm HSS T/S DRILLRp1.433.000Read moreSherwood HSS Taper Shank Drills, 3 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
31.50mm HSS T/S DRILLRead more
Sherwood HSS Taper Shank Drills, 3 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
31.5mm 90DEG HSS-COBALT 3FL T/S COUNTERSINKRp1.820.000Read moreSherwood HSS-Co 5% 3 Flute Countersink – Taper Shank
Suitable for deburring and chamfering most metals and plastics. Manufactured to BS328:Part 5:1983. 90° inclusive angle.
-
31/32″ HSS T/S DRILLRead more
Sherwood General Purpose HSS Taper Shank Drills, 3 Morse Taper – Inch Sizes
Series T100 – Inch
Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN. -
31/64″ HSS S/S BRIGHT JOBBER DRILLRead moreHSS Jobber Drills Metric, Bright Finish – Inch
Series J100 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
31/64″ HSS S/S JOBBER DRILLRp1.151.000Read moreHSS Jobber Drills Steam Tempered – Inch
Series J100
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
31/64″ HSS S/S L/S DRILLRead moreHSS Straight Shank Long Series Drills
General purpose high speed steel long series drills are designed for deep hole drilling of most materials.
The drill has the same diameter on both the fluted section and the shank.
Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494.