Archives: Products
Showing 7329–7344 of 23773 results
-
25.00mm x 500mm O/A HSS TAPER SHANK DRILLRead moreHSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 3 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite.
Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8.
Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1. -
25.0mm 3FL STANDARD CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 3 Flute: Regular Series, Metric
3 Flute: Regular Series – Metric
Centre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
25.0mm 4FL STANDARD CARBIDE END MILLRp5.977.000Read moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric
4 Flute: Regular Series – Metric
Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
25.0mm DIA BUTTON MAGNETRead moreKennedy Button Magnets
A horseshoe type cylindrical magnet. Opposing poles are at the same end of the magnet separated by a slot. Supplied with a plain bore and keeper. Permanently magnetic.
-
25.0mm ST/SH SHORT CARBIDE END MILLRead moreCarbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMC-4PS CarbideCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMC-4PS Carbide -
25.0mm ST/SH SHORT CARBIDE END MILL – TICNRead moreCarbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMT-4PS TiCN CoatedCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 50
4 Flute – Short Series
EMT-4PS TiCN Coated -
25.0x19mm CUTx1/4″SK.2FLSTR. PLUNGE BITRead moreRouter Cutters
Two Flute Straight Plunging Bits
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move. -
25.0x32mm CUTx1/2″SK.2FLSTR. PLUNGE BITRead moreRouter Cutters
Two Flute Straight Plunging Bits
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move. -
25.0×4.00mm RADx1/4″ SHANK OVEE BITRead moreRouter Cutters
Ogee Bits
For panel mould on cabinets and drawer fronts. -
25.4×14.5mm CUTx1/4″SK. RS CLASSICAL BITRead moreRouter Cutters
RS Classical Bits
With ball bearing guide. For mounting slotting. Complete with ball bearing guide which also ensures a constant depth of slot. -
25.4x19mm CUTx1/4″SK.2FLSTR. PLUNGE BITRead moreRouter Cutters
Two Flute Straight Plunging Bits
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move. -
25.4x32mm CUTx1/2″SK.2FLSTR. PLUNGE BITRead moreRouter Cutters
Two Flute Straight Plunging Bits
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move. -
25.50mm HSS T/S DRILLRp841.000Read moreSherwood HSS Taper Shank Drills, 3 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
25.5mmx6mm HSS PLAIN SHANK WOODRUFF CUTTERRead moreSherwood HSS Plain Shank Woodruff Cutters
12mm/1/2â Shank Ã
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850.Metric Limits of Tolerances
Diameter: + 0.000 -0.127
Width 2 up to 4: – 0.014 -0.028
Width 4 up to 7: – 0.020 -0.038
Width 7mm up: – 0.025 -0.047 -
25.5mmx6mm HSS SC/SH WOODRUFF CUTTERRead moreSherwood HSS Threaded Shank Woodruff Cutters – Metric
12mm/Shank Diameter
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850. Shank to DIN 1835/D.Metric Limits of Tolerances:
Diameter +0.000 -0.127.
Width
2 up to 4: – 0.014 -0.028.
4 up to 7: – 0.020 -0.038.
7mm up: – 0.025 -0.047. -
25.5mmx8mm HSS PLAIN SHANK WOODRUFF CUTTERRead more
Sherwood HSS Plain Shank Woodruff Cutters
12mm/1/2â Shank Ã
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850.Metric Limits of Tolerances
Diameter: + 0.000 -0.127
Width 2 up to 4: – 0.014 -0.028
Width 4 up to 7: – 0.020 -0.038
Width 7mm up: – 0.025 -0.047