Archives: Products
Showing 7313–7328 of 23773 results
-
25.0 WELDON STD END MILL-TICN-8% CORead moreSwissTech HSS-Co 8% Weldon Shank End Mills 4 & 6 Flute: Series 09, Regular – TiCN Coated
Series 09 – Regular Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B.
Shank cutting diameter:
3-6mm to +0.04 -0.0.
8-20mm to +0.05 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
25.0 WELDON STD FINE ROUGH E/MILL-TiALN-8% CORead moreSwisstech HSS-Co 8% Weldon Shank Fine Pitch Ripper Cutters: Series 25, Regular – TiALN Coated
Series 25 – Regular Series, TiALN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
25.0 WELDON STD FINE ROUGH E/MILL-TICN-8% CORead moreSwisstech HSS-Co 8% Weldon Shank Fine Pitch Ripper Cutters: Series 25, Regular – TiCN Coated
Series 25 – Regular Series, TiCN Coated
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
25.0 x 250mm SDS-PLUS HAMMER DRILL BITRp366.000Read moreSDS-Style Fitting Hammer Drill Bits
Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance coupled with wear resistance. Manufactured to DIN 8035.
-
25.0 x 450mm SDS-PLUS HAMMER DRILL BITRp418.000Read more
SDS-Style Fitting Hammer Drill Bits
Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance coupled with wear resistance. Manufactured to DIN 8035.
-
25.0-24.0 ER40 SINGLE ANGLE COLLETRead moreER – Single Angle Collets
Manufactured from hardened and tempered high alloy steel.
Conform to DIN 6499. -
25.00mm 100DEG COUNTERSINKRp801.000Read moreHSS-Co 5% High Performance Countersink – 3 Flute, 100°
AÂ chatter-free cutter giving an excellent burr-free finish. Capable of deburring and countersinking in one stroke with no âback-offâ of tool.
Also free countersinking of aluminium with no secondary bulge. For special applications and exotic materials, a choice of hard coatings is available. -
25.00mm 60DEG COUNTERSINKRp801.000Read moreHSS-Co 5% High Performance Countersink – 3 Flute, 60°
AÂ chatter-free cutter giving an excellent burr-free finish. Capable of deburring and countersinking in one stroke with no âback-offâ of tool.
Also free countersinking of aluminium with no secondary bulge. For special applications and exotic materials, a choice of hard coatings is available. -
25.00mm 90DEG COUNTERSINKRp801.000Read moreHSS-Co 5% High Performance Countersink – 3 Flute, 90°
AÂ chatter-free cutter giving an excellent burr-free finish. Capable of deburring and countersinking in one stroke with no âback-offâ of tool.
Also free countersinking of aluminium with no secondary bulge. For special applications and exotic materials, a choice of hard coatings is available. -
25.00mm HSS 1/2″ PARALLEL SHANK DRILLRp504.000Read moreHSS Reduced Shank Drills (Blacksmiths)
1/2â parallel shank. General purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2â. Point angle: 118°, helix angle: normal, web thickness: standard, tolerance of diameter: h8, tolerance of shank: 0.01/0.08. Manufactured to works standard.
-
25.00mm HSS SP/FL PARALLEL HAND REAMERRp2.326.000Read moreStraight Shank Parallel Hand Reamers
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012. -
25.00mm HSS T/S DRILLRp804.000Read moreSherwood HSS Taper Shank Drills, 3 Morse Taper – Metric
Series T100
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345. -
25.00mm HSS T/S SP/FL MACHINE REAMERRp2.475.000Read moreTaper Shank Machine Reamers
Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.
Tolerances (to H7)
Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.010, -0.005.
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.012, -0.006.
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.015, -0.008.
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.017, -0.009.
Diameter: Over 30.00 ~ up to 50.00. Tolerance: +0.021, -0.012.
Diameter: Over 50.00 ~ up to 80.00. Tolerance: +0.025, -0.014.
Diameter: Over 80.00 ~ up to 120.00. Tolerance: +0.029, -0.016. -
25.00mm HSS-COBALT T/S DRILLRp1.414.000Read moreHSS-Co 5% Taper Shank Drills
High heat resistant drill for drilling alloyed and unalloyed steels and castings with a tensile strength over 800N/mm2. Especially suitable for hot and cold rolled steels as well as case hardening and heat treatable steels. Manufactured to Type N DIN 345.345.
-
25.00mm x 10.00mm HSS CENTRE DRILLRp531.000Read moreHSS Centre Drills – Metric
Metric Series
Designed with spiral flutes and various lengths and forms to give high quality centre holes that suit most applications. 60° inclusive angle.
Manufactured to BS 328 : Part 2 : 1986, DIN 333A, ISO 866, ISO 2540, ISO 2541. -
25.00mm x 400mm O/A HSS TAPER SHANK DRILLRead moreHSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 3 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite.
Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8.
Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1.