Archives: Products
Showing 7185–7200 of 23773 results
-
24″/605mm VERNIER CALIPER FINE ADJUSTMENTRead moreOxford Heavy Duty Vernier Calipers
Give inside and outside readings. Dual reading scale (metric and inch) with 14° bevelled vernier scale for reduced parallax reading error, fine adjustment assembly and knurled locking nut. Internal reading edges have rounded faces for accurate bore measurement. Manufactured from hardened stainless steel.
-
24″x0.001″ HEIGHT GAUGERead moreOxford Dual Counter Height Gauges
Used in conjunction with a granite or metal surface plate, the Oxford dual counter height gauge will give you the accuracy you need when laying out work prior to machining.
The height gauge can also be used in much the same way as a caliper to help you determine the dimensions of a workpiece.
⢠Designed for accurate marking out and taking precise measurements.
⢠Measuring head positioned on sturdy twin columns providing highly repeatable height measurements and stability.
⢠Easy reading with dual directional negative and positive reading mechanical digital counters.
⢠Rotating dial face.
⢠Independently set the counters, to zero at any position.
⢠Large feed wheel for rapid and precise adjustment.
⢠Tungsten carbide tipped scriber for accurate marking out.
⢠Manufactured from durable stainless steel. -
24″x16″ RAFTERS SQUARERead moreKennedy Rafterâs Square
Manufactured from hardened and tempered ground steel. Graduated to 2mm on one side and 1/8â and 1/16â increments on the other. In hands of a skilled carpenter the simple rafterâs square becomes an indispensable calculating device of immense capacity. Enabling the carpenter to easily determine the length of any common, hip, valley or jack rafter for any pitch of roof. To make the proper cuts, top and bottom as well as slide or cheek cuts for any rafter.
-
24″x2″x 6TPI HSS ALL HARD HACKSAW BLADESRp996.000Read moreHSS All Hard Power Saw Blades
Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.
Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2â).
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4â to 3/4â).
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16â to 1).
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2â to 1 1/2â).
TPI: 4. Suitable for Section Width: 19mm and above (3/4â and above). -
24″x36″ HEAVY DUTY POLYTHENE BAGS (PK-100)Read morePolythene Bags (Plain)
A range of various sized light to heavy duty food grade polythene bags to suit all of your packaging requirements.
-
24″x40″ WOVEN POLYPROPYLENE BAGS (PK-100)Read moreAvon Woven Polypropylene Sacks
A material made by weaving polypropylene tapes in two directions to form a lightweight breathable fabric suitable for grains, seeds, minerals, sand and other products. Woven polypropylene bags offer the best packaging for a large
variety of products in industries such as agriculture, chemical, mining, building materials, and construction. Woven polypropylene bags offer economy, better protection, weight savings, and greater strength than other available packaging. Sold in packs of 100. -
240mm CRIMPING PLIERSAdd to cartKennedy Multi-Purpose Crimping Plier Kit
Made from heavy gauge carbon steel heat treated to HRa 65/70. Chemically blackened with cushion grip handles for operator comfort. Kit comes complete with 100 assorted insulated and non-insulated terminals in a neat plastic see through box.
Strip range: 0.75 – 6.
Crimp/cut capacity: 1.5 – 16mm. -
240mm INSULATED PUMP/BOX JOINT PLIERSRead moreInsulated Pump/Box Joint Pliers
Hardened chromed steel jaws. Sliding pivot joint allows the widest range of jaw openings. Serrated jaws for gripping flat and round parts. The handles cannot be closed together, preventing trapped fingers.
Fully insulated to conform to VDE 0680/201, IEC 900 and BS EN 60900 standards for safe electrical applications up to 1000V. -
240V 16A FEMALE 3 PIN SOCKET BS4343Read moreSite Plugs & Sockets
Rated to 16A over 6 hours.
Colour coded: 110V yellow, 240V blue.
Conform to BS 4343 : 1968.
Sockets fitted with fully waterproof spring loaded caps. -
240V 16A MALE 3 PIN PLUGBS4343Read moreSite Plugs & Sockets
Rated to 16A over 6 hours.
Colour coded: 110V yellow, 240V blue.
Conform to BS 4343 : 1968.
Sockets fitted with fully waterproof spring loaded caps. -
242x142mm RECTANGULAR MAGNETIC TRAYRead moreKennedy Magnetic Trays – Rectangular Tray
Rectangular Tray
For holding larger items. -
24mm (15/16″) WAD HOLLOW PUNCHRead moreKennedy Straight Shank Hollow Punches
Manufactured from hardened carbon steel. Through body ejection of the punched material makes them ideal for punching clean edged holes in leather, wood, plastics, card and paper.
-
24mm 30SWG FLAT END DE-CARB BRUSHRead moreFlat End Decarbonising Brushes
For hard to reach areas such as drilled holes, recesses and corners. For removalof burrs, rust and paint. 30 SWG
-
24mm 30SWG POINTED END DE-CARB BRUSHRead morePointed End Decarbonising Brushes
For use in high speed air and electrical tools. Ideal for hard to reach areas. For the removal of paint, carbon and for de-burring. 6mm Shanks. 30 SWG
-
24mm CARBIDE TIPPED HOLESAWRead moreCarbide Tipped Holesaws
Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.
-
24mm CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982.