Archives: Products
Showing 6609–6624 of 23773 results
-
20″ STRAIGHT NOSE INT. CIRCLIP PLIERS 165-300mmRead moreKennedy Heavy-Duty Snap Ring Pliers
Ratcheting
Heat-treated steel circlip pliers for large equipment repair. Replaceable tips and spring ratchet locking mechanism to securely hold against snap ring tension. Black powder coated. Galvanised tips and lock lever. Insulated lever handle.
Overall length: 510mm (20â) -
20″ STRAIGHT NOSE INT/EXT CIRCLIP JAW 165-300mmRead moreKennedy Replacement Jaws for Ring Pliers
To suit Kennedy Heavy Duty Snap Ring Pliers (165mm-300mm)
-
20″ WEIGHTY TEE HINGE (PR) GALVANISEDRead moreTee Hinges (Supplied as pairs)
Extra heavy duty: for very high load applications such as for farm field gates.
Material thickness up to 4mm. -
20″/500mm FLEXIBLE NYLON HOSE 8mm BORERead moreKennedy Flexible Hoses
For use with Kennedy grease guns, flexible hoses improve access in confined spaces, 1/8â BSP connecting threads.
-
20″/500mm FLEXIBLE RUBBER HOSE 11mm BORERead moreKennedy Flexible Hoses
For use with Kennedy grease guns, flexible hoses improve access in confined spaces, 1/8â BSP connecting threads.
-
20″x1.1/2″x 6TPI HSS ALL HARD HACKSAW BLADESRp481.000Read moreHSS All Hard Power Saw Blades
Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.
Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2â).
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4â to 3/4â).
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16â to 1).
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2â to 1 1/2â).
TPI: 4. Suitable for Section Width: 19mm and above (3/4â and above). -
20″x16″ YELLOW COTTON DUSTERRead moreYellow Duster
Soft traditional yellow duster. 100% natural cotton with sewn edges. Size: 510 x 400mm.
-
20″x250Gx330M LAYFLAT TUBINGRead moreAvon? Layflat Polythene Tubing
Customise your polythene bag size! Choose your preferred width and use the layflat tubing to make your own custom sized bags or sleeves. Tubing can be heat sealed, tied or stapled closed. Available in Clear and Black. Larger sizes available on request.
-
20″x30″ PLAIN COTTON TEATOWELRead moreTea Towel
Traditional plain cotton tea towel for general-purpose use. Size: 510 x 760mm.
-
20″x34″x47″ BLACK COMPACTOR SACKS 300G (PK-100)Read moreAvon Black Compactor Sacks
Extra large and heavy gauge for use with bulk disposal of refuse including larger objects. Dimensions (W x L x H): 51 x 86 x 120cm. Thickness: 300 gauge. Pack of 100.
-
20″x35″x47″ 140LTR H/D WHEELIE BIN LINERS (PK-100)Read moreWheelie Bin Liners
Heavy gauge refuse sacks. Specifically designed for use with wheelie bins. Packs of 100.
-
20/40- TONNE 2 STAGE HEAVY DUTY AIR JACKRead moreAir Trolley Jack – 20/40T 2 Stage
For use when lifting heavy vehicles such as lorries etc. This industrial air jack has a robust steel chassis, ‘T’ bar handle with integral air control valve and two extensions for increased lifting height. It requires an air pressure of 116 – 174psi (8 – 12bar) and a supply rate of 105ltr/min (3.7cfm).
JTA2040
Air supply: 116 – 174psi (8 – 12bar).
Air consumption: 105ltr/min (3.7cfm).
Lifting capacity: 20T/40T.
Base height: 210mm.
Lifting height: 40T – 433mm, 20T – 520mm.
Air inlet size: 1/4NTP. -
200 K20 BRAZED TOOLRead moreKennedy Brazed Tip Cranked Turning & Facing Tools – K20
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
200 P20/P30 BRAZED TOOLRead more
Kennedy Brazed Tip Cranked Turning & Facing Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
200 P40 BRAZED TOOLRp340.000Read more
Kennedy Brazed Tip Cranked Turning & Facing Tools – P40
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
200-225mm EXTERNAL MICROMETERRead moreOxford Enamelled Frame External Micrometers – Metric
With enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25 – 50mm/1 – 2â and over supplied with setting standard. Manufactured to BS 870. All supplied in a impact resistant fitted plastic case.